[Ocfs2-users] Huge Problem ocfs2
Marian Serban
marian at easic.ro
Fri Nov 9 16:54:57 PST 2012
That's the kernel:
Linux ro02xsrv003.bv.easic.ro 2.6.39.4 #6 SMP Mon Dec 12 12:09:49 EET
2011 x86_64 x86_64 x86_64 GNU/Linux
Anyway, I tried disabling the metaecc feature, no luck.
[root at ro02xsrv003 ~]# tunefs.ocfs2 --fs-features=nometaecc
/dev/mapper/volgr1-lvol0
tunefs.ocfs2: I/O error on channel while opening device
"/dev/mapper/volgr1-lvol0"
These are the last lines of strace corresponding to the tunefs.ocfs command:
open("/sys/fs/ocfs2/cluster_stack", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0644, st_size=4096, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x7f54aad05000
read(4, "o2cb\n", 4096) = 5
close(4) = 0
munmap(0x7f54aad05000, 4096) = 0
open("/sys/fs/o2cb/interface_revision", O_RDONLY) = 4
read(4, "5\n", 15) = 2
read(4, "", 13) = 0
close(4) = 0
stat("/sys/kernel/config", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
statfs("/sys/kernel/config", {f_type=0x62656570, f_bsize=4096,
f_blocks=0, f_bfree=0, f_bavail=0, f_files=0, f_ffree=0, f_fsid={0, 0},
f_namelen=255, f_frsize=4096}) = 0
open("/dev/mapper/volgr1-lvol0", O_RDONLY) = 4
ioctl(4, BLKSSZGET, 0x7fffce711454) = 0
close(4) = 0
pread(3,
"\0\0\v\25\37\1\200\200\202@\21\2\30\26\0\0\0,\17\272\241\4\340\210\311\377\17\300\327\332\373\17"...,
4096, 532480) = 4096
close(3) = 0
write(2, "tunefs.ocfs2", 12tunefs.ocfs2) = 12
write(2, ": ", 2: ) = 2
write(2, "I/O error on channel", 20I/O error on channel) = 20
write(2, " ", 1 ) = 1
write(2, "while opening device \"/dev/mappe"..., 47while opening device
"/dev/mapper/volgr1-lvol0") = 47
write(2, "\r\n", 2
On 10.11.2012 02:06, Sunil Mushran wrote:
> It's either that or a check sum problem. Disable metaecc. Not sure
> which kernel you are running.
> We had fixed few problems few years ago around this. If your kernel is
> older, then it could be
> a known issue.
>
>
> On Fri, Nov 9, 2012 at 12:50 PM, Marian Serban <marian at easic.ro
> <mailto:marian at easic.ro>> wrote:
>
> Hi Sunil,
>
> Thank you for answering. Unfortunately, it doesn't seem like it's
> a hardware problem. There's no way a cable can be loose because
> it's iSCSI over 1G Ethernet (copper wires) environment. Also I
> performed "dd if=/dev/.... of=/dev/null" and first 16GB or so are
> fine. "Dmesg" shows no errors.
>
>
> Also tried with debugfs.ocfs2:
>
>
> [root at ro02xsrv003 ~]# debugfs.ocfs2 /dev/mapper/volgr1-lvol0
> debugfs.ocfs2 1.6.3
> debugfs: ls
> ls: Bad magic number in inode '.'
> debugfs: slotmap
> slotmap: Bad magic number in inode while reading slotmap system file
> debugfs: stats
> Revision: 0.90
> Mount Count: 0 Max Mount Count: 20
> State: 0 Errors: 0
> Check Interval: 0 Last Check: Fri Nov 9 14:35:53 2012
> Creator OS: 0
> Feature Compat: 3 backup-super strict-journal-super
> Feature Incompat: 16208 sparse extended-slotmap
> inline-data metaecc xattr indexed-dirs refcount discontig-bg
> Tunefs Incomplete: 0
> Feature RO compat: 7 unwritten usrquota grpquota
> Root Blknum: 129 System Dir Blknum: 130
> First Cluster Group Blknum: 64
> Block Size Bits: 12 Cluster Size Bits: 18
> Max Node Slots: 10
> Extended Attributes Inline Size: 256
> Label: SAN
> UUID: B4CF8D4667AF43118F3324567B90A987
> Hash: 3698209293 (0xdc6e320d)
> DX Seed[0]: 0x9f4a2bb7
> DX Seed[1]: 0x501ddac0
> DX Seed[2]: 0x6034bfe8
> Cluster stack: classic o2cb
> Inode: 2 Mode: 00 Generation: 1093568923 (0x412e899b)
> FS Generation: 1093568923 (0x412e899b)
> CRC32: 46f2d360 ECC: 04d4
> Type: Unknown Attr: 0x0 Flags: Valid System Superblock
> Dynamic Features: (0x0)
> User: 0 (root) Group: 0 (root) Size: 0
> Links: 0 Clusters: 45340448
> ctime: 0x4ee67f67 -- Tue Dec 13 00:25:43 2011
> atime: 0x0 -- Thu Jan 1 02:00:00 1970
> mtime: 0x4ee67f67 -- Tue Dec 13 00:25:43 2011
> dtime: 0x0 -- Thu Jan 1 02:00:00 1970
> ctime_nsec: 0x00000000 -- 0
> atime_nsec: 0x00000000 -- 0
> mtime_nsec: 0x00000000 -- 0
> Refcount Block: 0
> Last Extblk: 0 Orphan Slot: 0
> Sub Alloc Slot: Global Sub Alloc Bit: 65535
>
>
>
>
> Marian
>
>
> _______________________________________________
> Ocfs2-users mailing list
> Ocfs2-users at oss.oracle.com <mailto:Ocfs2-users at oss.oracle.com>
> https://oss.oracle.com/mailman/listinfo/ocfs2-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20121110/38888eb3/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3973 bytes
Desc: S/MIME Cryptographic Signature
Url : http://oss.oracle.com/pipermail/ocfs2-users/attachments/20121110/38888eb3/attachment-0001.bin
More information about the Ocfs2-users
mailing list