[Ocfs2-users] Slow on open()

Thu Jan 28 11:05:53 PST 2010

An update for the situation.

It seems that the lockup situation when we brought in the new server is not
quite exactly the same behavior as before.

Running "iozone -O" on the new machine, which mount OCFS2 without serving
the content yet (the load is very low), could leads to OCFS2 lockup for
60-90 seconds. This happened very frequently (running iozone 3 times and
this happened once). On the other hand, I run "iozone -O 50" times on the
older server without having this lockup. Sometime it slow (few seconds), but
not this slow.

When the lockup occur, both machine would hang. Even simple ls just hang.
The funny thing is that, sometime, iozone command is actually not yet
running. It just start to spawn the command and lockup occurred, so strace
show nothing suspicious. In case it hang in the middle of iozone, the system
call the takes long time vary from sync, read, write, and lseek.

I tried simpler things like repeatedly do "ls" or just "echo hello world >
test" but it didn't cause this problem. The command that will cause this
lockup almost certainly is just "iozone -O" and it must be called on the
second server.

2010/1/28 Somsak Sriprayoonsakul <somsaks at gmail.com>

> For our case log file shouldn't be the problem since it's store locally.
> But fragmentation might be the cause. We serve a lot of small files (mostly
> html and jpg) out of OCFS2. And the file come in and go out very frequently,
> old topic will be paged out to archive directory out of OCFS2, while new
> topic are created on OCFS2. Thanks for pointing the bug report then.
>
> Right now we are using 4 slots and planning to serving about 4 in near
> future. I think we shouldn't decrease the number of slot right now.
>
> Are there any other statistics that we should observe for?
>
> 2010/1/28 Brad Plant <bplant at iinet.net.au>
>
>>  Hi Somsak,
>>
>> I observed high loads and apache slowness when there was insufficient
>> contiguous free space due to fragmentation. I believe it was because apache
>> couldn't write it's log files efficiently. We had 2 apache nodes and I found
>> that stopping apache on the problem node resolved the problem until I
>> deleted lots of unused files.
>>
>> My symptoms don't seem to suggest a slow open() syscall like your strace
>> results are showing, but I certainly got the high load and poor apache
>> performance. It might be worth checking out anyway. There is a bug report
>> and we're just waiting for the patch to get reviewed and made publicly
>> available.
>>
>> http://oss.oracle.com/bugzilla/show_bug.cgi?id=1189
>>
>> Cheers,
>>
>> Brad
>>
>>
>>
>> On Tue, 19 Jan 2010 16:12:07 +0700
>> Somsak Sriprayoonsakul <somsaks at gmail.com> wrote:
>>
>> > Hello,
>> >
>> > We are using OCFS2 version 1.4.3 on CentOS5, x86_64 with 8GB memory. The
>> > underlying storage is HP 2312fc smart array equipped with 12 SAS 15K
>> rpm,
>> > configured as RAID10 using 10 HDDs + 2 spares. The array has about 4GB
>> > cache. Communication is 4Gbps FC, through HP StorageWorks 8/8 Base
>> e-port
>> > SAN Switch. Right now we only have this machine connect to the SAN
>> through
>> > switch, but we plan to add more machine to utilize this SAN system.
>> >
>> > Our application is apache version 1.3.41, mostly serving static HTML
>> file +
>> > few PHP. Note that, we have to downgrade to 1.3.41 due to our
>> application
>> > requirement. Apache is configured on has 500 MaxClients.
>> >
>> > The storage OCFS2 are formatted with mkfs.ocfs2 without any special
>> option
>> > on. It run directly from multipath'ed SAN storage without LVM or
>> software
>> > RAID. We mount OCFS2 with noatime, commit=15, and data=writeback (as
>> well as
>> > heartbeat=local). Our cluster.conf is like this
>> >
>> > cluster:
>> >     node_count = 1
>> >     name = mycluster
>> >
>> > node:
>> >     ip_port = 7777
>> >     ip_address = 203.123.123.123
>> >     number = 1
>> >     name = mycluster.mydomain.com
>> >     cluster = mycluster
>> >
>> > (NOTE: Some details are neglected here, such as hostname and IP
>> address).
>> >
>> > Periodically, we found that the file system work very slow. I think that
>> it
>> > happened once every few minutes. When the file system slow, httpd
>> process
>> > CPU utilization will goes much higher to about 50% or above. I tried to
>> > debug this slow by creating a small script that periodically do
>> >
>> > strace -f dd if=/dev/zero of=/san/testfile bs=1k count=1
>> >
>> > And time the speed of dd, usually dd will finish within subsecond, but
>> > periodically dd will be much slower to about 30-60 seconds. Strace
>> output
>> > show this.
>> >
>> >      0.000026 open("/san/testfile", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 1
>> >     76.418696 rt_sigaction(SIGUSR1, NULL, {SIG_DFL, [], 0}, 8) = 0
>> >
>> > So I presume that this mean the open system call is periodically very
>> slow.
>> > I did about 5-10 tests which yield similar strace'd results (ranging
>> from
>> > just 5-7 seconds to 80 seconds).
>> >
>> > So my question is, what could be the cause of this slowness? How could I
>> > debug this deeper? On which point should we optimize the file system?
>> >
>> > We are in the process of purchasing and adding more web servers to the
>> > system and use reverse proxy to load balance between two servers. We
>> just
>> > want to make sure that this will not make situation worst.
>>
>> _______________________________________________
>> Ocfs2-users mailing list
>> Ocfs2-users at oss.oracle.com
>> http://oss.oracle.com/mailman/listinfo/ocfs2-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20100129/3e1f3b70/attachment.html 