[Ocfs2-users] mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

[Nandkumar Mane]

I looked at /etc/ocfs2/cluster.conf and it seems like everything is
fine. Do you think there can be any other problem?

node:
        ip_port = 7777
        ip_address = 192.168.10.1
        number = 0
        name = linux-117
        cluster = ocfs2

node:
        ip_port = 7777
        ip_address = 192.168.10.2
        number = 1
        name = linux-118
        cluster = ocfs2

cluster:
        node_count = 2
        name = ocfs2

Thank you
Nandkumar

On Wed, Sep 10, 2008 at 9:41 PM, Tomas Hidalgo Salvador (Cajamar)
<thsa at cajamar.es> wrote:
>
>
>> Hi,
>>
>> Check in /etc/ocfs2/cluster.conf the instance "number". For example, If you have two node:
>>
>> node:
>>        ip_port = 7777
>>        ip_address = 10.0.0.1
>>        number = 0 <------------------------
>>        name = priamus
>>        cluster = ocfs2
>>
>> node:
>>        ip_port = 7777
>>        ip_address = 10.0.0.2
>>        number = 1  <-----------------------------
>>        name = hektor
>>        cluster = ocfs2
>>
>> cluster:
>>        node_count = 2
>>        name = ocfs2
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Nandkumar Mane <nandkumarm at gmail.com>
>> Date: Wed, Sep 10, 2008 at 5:17 PM
>> Subject: [Ocfs2-users] mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".
>> To: ocfs2-users at oss.oracle.com
>>
>>
>> Hi,
>>
>> I am trying to configure a two node cluster on SLES10SP2 using user level heartbeat. Here is my configuration.
>>
>> ocfs2-tools-1.4.0-0.3
>> **user level heartbeat**
>>
>> -> lsmod | grep ocfs
>> ocfs2_user_heartbeat 20992 1
>> ocfs2_dlmfs 37776 1
>> ocfs2_dlm 204456 1 ocfs2_dlmfs
>> ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm
>> configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager
>>
>> mounted filesystem list contains following two lines which are required for o2cb.
>> configfs on /sys/kernel/config type configfs (rw)
>> ocfs2_dlmfs on /dlm type ocfs2_dlmfs (rw)
>>
>> /etc/ocfs2/cluster.conf file is created on one node using ocfs2console and then propogated changes to other host.
>>
>> ->/etc/init.d/o2cb status
>> Module "configfs": Loaded
>> Filesystem "configfs": Mounted
>> Module "ocfs2_nodemanager": Loaded
>> Module "ocfs2_dlm": Loaded
>> Module "ocfs2_dlmfs": Loaded
>> Filesystem "ocfs2_dlmfs": Mounted
>> Checking O2CB cluster ocfs2: Online
>> Network idle timeout: 30000
>> Network keepalive delay: 2000
>> Network reconnect delay: 2000
>> Checking O2CB heartbeat: Not active
>>
>> Everything looks fine till this point. I am able to configure and start o2cb successfully.
>> Now when I try to mount a ocfs2 filesystem, it give me following error.
>>
>> ->mount /dev/mapper/360a980004334637558344a7863755656 /hdmnt1
>> ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
>> mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted"
>>
>> As per my opnion, I have followed proper stepts to configure. (I had done same with kernel level heartbeat successfully.) Is user level heartbeat supported in sles10sp2?
>>
>> Can somebody please give me some direction?
>>
>> Thanks
>> Nand
>>
>>
>> _______________________________________________
>> Ocfs2-users mailing list
>> Ocfs2-users at oss.oracle.com
>> http://oss.oracle.com/mailman/listinfo/ocfs2-users
>>
>
>
> _______________________________________________
> Ocfs2-users mailing list
> Ocfs2-users at oss.oracle.com
> http://oss.oracle.com/mailman/listinfo/ocfs2-users