[Ocfs2-users] VM node won't talk to host

[Bret Baptist]

Turns out that you DO have to have the same device name on all nodes.  Even 
though the UUID is the same.  I pushed the network card for AOE on the host 
into the VM and used the same device names.  Like magic OCFS2 on the VM starts 
talking to the host.  That seems like a pretty serious limitation to me.

Does anyone with some knowledge of the code have any input on this short 
coming?


Thank you.


Bret.
On Thursday 21 August 2008 16:37:50 Bret Baptist wrote:
> The host servers are also able to connect to the VM server.
>
> Here is the cluster.conf:
> node:
>         ip_port = 7777
>         ip_address = 10.1.1.20
>         number = 0
>         name = wedge
>         cluster = iecluster
>
> node:
>         ip_port = 7777
>         ip_address = 10.1.1.21
>         number = 1
>         name = porkins
>         cluster = iecluster
>
> node:
>         ip_port = 7777
>         ip_address = 10.1.1.4
>         number = 2
>         name = opennebula
>         cluster = iecluster
>
> cluster:
>         node_count = 3
>         name = iecluster
>
>
> The o2cb configuration:
> O2CB_HEARTBEAT_THRESHOLD=61
> O2CB_IDLE_TIMEOUT_MS=10000
> O2CB_KEEPALIVE_DELAY_MS=5000
> O2CB_RECONNECT_DELAY_MS=2000
>
>
> I have the VM connecting to a bridge that is on the host server, in this
> case 10.1.1.21 is assigned to the bridge br1, the VM opennebula has an IP
> address of 10.1.1.4 on this bridge as well.
>
> Let me know if there is any other details of the set up you would need to
> know.
>
>
> Thank you very much for the help.
>
>
> Bret.
>
> On Thursday 21 August 2008 14:55:43 Herbert van den Bergh wrote:
> > What about from the host server(s) to the VM?  And what does
> > cluster.conf look like?
> >
> > Basically, all nodes need to be able to connect to all others' OCFS2
> > port.
> >
> > Thanks,
> > Herbert.
> >
> > Bret Baptist wrote:
> > > On Thursday 21 August 2008 14:37:09 Wessel wrote:
> > >> Hello Bret,
> > >>
> > >> An obvious question, but have you tried disabling the firewall on the
> > >> KVM VM? Also, are you able to ping the other two Ubuntu nodes from the
> > >> KVM VM?
> > >
> > > There is no firewall enabled on the VM, in fact iptables is not even
> > > installed.
> > >
> > > I am able to ping and do other communication from the VM to the host
> > > server.
> > >
> > >
> > > Bret.
> > >
> > >> -----Oorspronkelijk bericht-----
> > >> Van: ocfs2-users-bounces at oss.oracle.com
> > >> [mailto:ocfs2-users-bounces at oss.oracle.com] Namens Bret Baptist
> > >> Verzonden: donderdag 21 augustus 2008 21:32
> > >> Aan: ocfs2-users at oss.oracle.com
> > >> Onderwerp: [Ocfs2-users] VM node won't talk to host
> > >>
> > >> I am trying to mount the same partition from a KVM ubuntu 8.04.1
> > >> virtual machine and on an ubuntu 8.04.1 host server.
> > >>
> > >> I am able to mount the partition just on fine on two ubuntu host
> > >> servers, they
> > >> both talk to each other.  The logs on both servers show the other
> > >> machine mounting and unmounting the drive.
> > >>
> > >> However, when I mount the drive in the KVM VM I get no communication
> > >> to the host servers.  I have checked with tcpdump and the VM doesn't
> > >> even attempt to
> > >> talk to the other cluster members.  The VM just mounts the drive like
> > >> no one
> > >>
> > >> else is on the cluster, even though both the other nodes already have
> > >> the drive mounted.
> > >>
> > >> I have checked and rechecked all the settings, the cluster.conf is the
> > >> same on
> > >> all nodes, the drive haa the same uuid and the same label.  The only
> > >> thing that is different is the actual device name.  On the host
> > >> servers it is the AOE device '/dev/etherd/e0.1p11', on the VM the
> > >> '/dev/etherd/e0.1' device is
> > >>
> > >> mapped to '/dev/sdb' so the OCFS2 partition shows up as '/dev/sdb11'
> > >>
> > >> The only thing I can think of is that the device names have to be the
> > >> same between all hosts, but that really doesn't make any sense to me.
> > >> Any help would be greatly appreciated.
> > >>
> > >>
> > >> Thanks.

-- 
Bret Baptist
Senior Network Administrator
bbaptist at iexposure.com
Internet Exposure, Inc.
http://www.iexposure.com
(612)676-1946 x17

Providing Internet Services since 1995
Web Development ~ Search Engine Marketing ~ Web Analytics
Network Security ~ On Demand Tech Support ~ E-Mail Marketing