[Ocfs2-test-devel] [PATCH 1/1] Ocfs2-test: Add rest of single-node testcases into single_run-WIP.sh
Marcos E. Matsunaga
Marcos.Matsunaga at oracle.com
Tue Jun 29 18:57:52 PDT 2010
Tristan,
I only have some questions about sendfiletest. If I remember correctly,
it requires interaction on the receiving node. I don't remember very
well as I used it a while ago. Also, on run_sendfiletest(), the error
message needs to be corrected. It shows as run_splice.
Other than that, it all seems fine to me.
Regards,
Marcos Eduardo Matsunaga
Oracle USA
Linux Engineering
“The statements and opinions expressed here are my own and do not
necessarily represent those of Oracle Corporation.”
On 06/29/2010 05:45 AM, Tristan Ye wrote:
> The original intention here to grow the single_run-WIP.sh is for mainline
> regression test, this patch tries to make all missing testcases present
> into script for a comprehensive single-node testing.
>
> Signed-off-by: Tristan Ye <tristan.ye at oracle.com>
> ---
> programs/python_common/single_run-WIP.sh | 452 ++++++++++++++++++++++++++++++
> 1 files changed, 452 insertions(+), 0 deletions(-)
>
> diff --git a/programs/python_common/single_run-WIP.sh b/programs/python_common/single_run-WIP.sh
> index ca888cf..89dafe8 100755
> --- a/programs/python_common/single_run-WIP.sh
> +++ b/programs/python_common/single_run-WIP.sh
> @@ -193,6 +193,115 @@ do_mkdir() {
> ${SUDO} ${CHOWN} -R ${USERID} $1
> }
>
> +run_create_and_open()
> +{
> + log_message "run_create_and_open" $@
> + if [ "$#" -lt "3" ]; then
> + echo "Error in run_create_and_open()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> + mountpoint=$3
> +
> + workdir=${mountpoint}/create_and_open_test
> + blocksize=4096
> + clustersize=32768
> + features="sparse,unwritten,inline-data"
> +
> + mountopts="defaults"
> +
> + log_start "create_and_open"
> +
> + do_format ${blocksize} ${clustersize} ${features} ${device}
> + do_mount ${device} ${mountpoint} ${mountopts}
> + do_mkdir ${workdir}
> +
> + outlog=${logdir}/create_and_open.log
> +
> + create_and_open ${workdir} >${outlog} 2>&1
> + RC=$?
> +
> + do_umount ${mountpoint}
> +
> + log_end ${RC}
> +}
> +
> +run_extend_and_write()
> +{
> + log_message "run_extend_and_write" $@
> + if [ "$#" -lt "3" ]; then
> + echo "Error in run_extend_and_write()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> + mountpoint=$3
> +
> + workfile=${mountpoint}/extend_and_write_testfile
> + blocksize=4096
> + clustersize=32768
> + features="sparse,unwritten,inline-data"
> +
> + for mopt in writeback ordered;do
> +
> + mountopts="data=${mopt}"
> +
> + log_start "extend_and_write_test" ${mountopts}
> +
> + do_format ${blocksize} ${clustersize} ${features} ${device}
> + do_mount ${device} ${mountpoint} ${mountopts}
> +
> + outlog=${logdir}/extend_and_write.log
> +
> + run_extend_and_write.py -f ${workfile} -l ${outlog} -n 1000 -s 4096
> + RC=$?
> +
> + do_umount ${mountpoint}
> +
> + log_end ${RC}
> + done
> +}
> +
> +run_directaio()
> +{
> + log_message "run_directaio" $@
> + if [ "$#" -lt "3" ]; then
> + echo "Error in run_directaio()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> + mountpoint=$3
> +
> + workfile=${mountpoint}/directaio_testfile
> + blocksize=4096
> + clustersize=32768
> + features="sparse,unwritten,inline-data"
> +
> + for mopt in writeback ordered
> + do
> + mountopts="data=${mopt}"
> +
> + log_start "direct-aio" ${mountopts}
> +
> + do_format ${blocksize} ${clustersize} ${features} ${device}
> + do_mount ${device} ${mountpoint} ${mountopts}
> +
> + outlog=${logdir}/directaio_${mopt}.log
> +
> + partial_aio_direct ${workfile} >${outlog} 2>&1
> + RC=$?
> +
> + do_umount ${mountpoint}
> +
> + log_end ${RC}
> + done
> +}
> +
> # run_aiostress ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
> run_aiostress()
> {
> @@ -495,6 +604,323 @@ run_renamewriterace()
> done
> }
>
> +run_splice()
> +{
> + log_message "run_splice" $@
> + if [ "$#" -lt "3" ]; then
> + echo "Error in run_splice()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> + mountpoint=$3
> +
> + workdir=${mountpoint}/testme
> + blocksize=4096
> + clustersize=32768
> + features="sparse,unwritten,inline-data"
> +
> + for mopt in writeback ordered
> + do
> + mountopts="data=${mopt}"
> +
> + log_start "splice" ${mountopts}
> +
> + do_format ${blocksize} ${clustersize} ${features} ${device}
> + do_mount ${device} ${mountpoint} ${mountopts}
> + do_mkdir ${workdir}
> +
> + outlog=${logdir}/splice_${mopt}.log
> +
> + splice_test.py -d ${workdir} -c 1000 -f splice_test.dat >${outlog} 2>&1
> + RC=$?
> +
> + do_umount ${mountpoint}
> +
> + log_end ${RC}
> + done
> +}
> +
> +run_sendfile()
> +{
> + log_message "run_sendfile" $@
> + if [ "$#" -lt "3" ]; then
> + echo "Error in run_splice()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> + mountpoint=$3
> +
> + workfile=${mountpoint}/ocfs2_sendfile_data
> + verifyfile=/tmp/sendfile_verify
> +
> + blocksize=4096
> + clustersize=32768
> + features="sparse,unwritten,inline-data"
> + port=8001
> +
> + for mopt in writeback ordered
> + do
> + mountopts="data=${mopt}"
> +
> + log_start "sendfile" ${mountopts}
> +
> + do_format ${blocksize} ${clustersize} ${features} ${device}
> + do_mount ${device} ${mountpoint} ${mountopts}
> +
> + # Generate original date file
> + dd if=/dev/random of=${workfile} bs=${clustersize} count=4
> + outlog=${logdir}/sendfile_${mopt}.log
> +
> + nc -l ${port} >${verifyfile} &
> + sendfiletest ${workfile} `hostname` >${outlog} 2>&1
> + RC=$?
> +
> + md51=`md5sum ${workfile}|cut -d' ' -f1`
> + md52=`md5sum ${verifyfile}|cut -d' ' -f1`
> +
> + if [ "${md51}" != "${md52}" ];then
> + log_message "md5sum verification failed."
> + RC=1
> + fi
> +
> + do_umount ${mountpoint}
> +
> + log_end ${RC}
> + done
> +}
> +
> +run_mmap()
> +{
> + log_message "run_mmap" $@
> + if [ "$#" -lt "3" ]; then
> + echo "Error in run_mmap()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> + mountpoint=$3
> +
> + workfile=${mountpoint}/mmap_testfile
> + features="sparse,unwritten,inline-data"
> +
> + for blocksize in 512 1024 2048 4096;do
> + for clustersize in 4096 32768 1048576;do
> + for mopt in writeback ordered;do
> + mountopts="data=${mopt}"
> +
> + log_start "mmap" ${blocksize} ${clustersize} ${features} ${mountopts}
> +
> + do_format ${blocksize} ${clustersize} ${features} ${device}
> + do_mount ${device} ${mountpoint} ${mountopts}
> +
> + outlog=${logdir}/mmap_${mopt}_${blocksize}_${clustersize}.log
> +
> + dd if=/dev/zero of=${workfile} bs=1M count=1024
> + mmap_test ${workfile} >${outlog} 2>&1
> + RC=$?
> +
> + do_umount ${mountpoint}
> +
> + log_end ${RC}
> + done
> + done
> + done
> +}
> +
> +run_reserve_space()
> +{
> + log_message "run_reserve_space" $@
> + if [ "$#" -lt "3" ]; then
> + echo "Error in run_reserve_space()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> + mountpoint=$3
> +
> + workfile=${mountpoint}/reserve_space_testfile
> + features="sparse,unwritten,inline-data"
> + space_free=
> + iter=1000
> +
> + for blocksize in 512 1024 2048 4096;do
> + for clustersize in 4096 32768 1048576;do
> + for mopt in writeback ordered;do
> + mountopts="data=${mopt}"
> +
> + log_start "reserve_space" ${blocksize} ${clustersize} ${features} ${mountopts}
> +
> + do_format ${blocksize} ${clustersize} ${features} ${device}
> + do_mount ${device} ${mountpoint} ${mountopts}
> +
> + outlog=${logdir}/reserve_space_${mopt}_${blocksize}_${clustersize}.log
> + space_free=`df|grep ${device}|awk '{print $4}'`
> + space_free=$((${space_free}*1024))
> +
> + for i in `seq ${iter}`;do
> + r_whence=0
> + r_start=$((${RANDOM}%${space_free}))
> + r_len=$((${RANDOM}%(${space_free}-${r_start})))
> +
> + reserve_space ${workfile} resv ${r_whence} ${r_start} ${r_len} >>${outlog} 2>&1 || {
> + RC=$?
> + break
> + }
> +
> + reserve_space ${workfile} unresv ${r_whence} ${r_start} ${r_len} >>${outlog} 2>&1 || {
> + RC=$?
> + break
> + }
> + done
> +
> + do_umount ${mountpoint}
> +
> + log_end ${RC}
> + done
> + done
> + done
> +}
> +
> +run_inline_data()
> +{
> + log_message "run_inline_data" $@
> + if [ "$#" -lt "3" ]; then
> + echo "Error in run_inline_data()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> + mountpoint=$3
> +
> + log_start "inline_data_test"
> + single-inline-run.sh -o ${logdir} -d ${device} ${mountpoint}
> + RC=$?
> + log_end ${RC}
> +}
> +
> +run_dx_dir()
> +{
> + log_message "run_dx_dir" $@
> + if [ "$#" -lt "3" ]; then
> + echo "Error in run_dx_dir()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> + mountpoint=$3
> + kernelsrc=$4
> +
> + log_start "index_dir_test"
> + index_dir_run.sh -o ${logdir} -d ${device} -t ${kernelsrc} ${mountpoint}
> + RC=$?
> + log_end ${RC}
> +}
> +
> +run_xattr_test()
> +{
> + log_message "run_xattr_test" $@
> + if [ "$#" -lt "3" ]; then
> + echo "Error in run_xattr_test()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> + mountpoint=$3
> +
> + log_start "xattr_test"
> + xattr-single-run.sh -c -o ${logdir} -d ${device} ${mountpoint}
> + RC=$?
> +
> + log_end ${RC}
> +}
> +
> +run_reflink_test()
> +{
> + log_message "run_reflink_test" $@
> + if [ "$#" -lt "3" ]; then
> + echo "Error in run_reflink()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> + mountpoint=$3
> +
> + #ordered mount option
> + log_start "reflink_test" "ordered"
> + ./reflink_test_run.sh -o ${logdir} -d ${device} ${mountpoint} || {
> + RC=$?
> + log_end ${RC}
> + }
> +
> + #writeback mount option
> + log_start "reflink_test" "writeback"
> + ./reflink_test_run.sh -W -o ${logdir} -d ${device} ${mountpoint}
> + RC=$?
> + log_end ${RC}
> +}
> +
> +# Following cases aim to test tools
> +run_mkfs()
> +{
> + log_message "run_mkfs" $@
> + if [ "$#" -lt "2" ]; then
> + echo "Error in run_mkfs()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> +
> + log_start "mkfs_test"
> + mkfs-test.sh -o ${logdir} -d ${device}
> + RC=$?
> + log_end ${RC}
> +}
> +
> +run_tunefs()
> +{
> + log_message "run_tunefs" $@
> + if [ "$#" -lt "2" ]; then
> + echo "Error in run_tunefs()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> +
> + log_start "tunefs_test"
> + tunefs-test.sh --with-mkfs=/sbin/mkfs.ocfs2 --log-dir=${logdir} ${device}
> + RC=$?
> + log_end ${RC}
> +}
> +
> +run_backup_super()
> +{
> + log_message "run_backup_super" $@
> + if [ "$#" -lt "2" ]; then
> + echo "Error in run_backup_super()"
> + exit 1
> + fi
> +
> + logdir=$1
> + device=$2
> +
> + log_start "backup_super_test"
> + test_backup_super.sh --with-mkfs=/sbin/mkfs.ocfs2 --log-dir=${logdir} ${device}
> + RC=$?
> + log_end ${RC}
> +}
> +
> #
> #
> # MAIN
> @@ -561,6 +987,10 @@ log_message "*** Start Single Node test ***"
>
> ${ECHO} "Output log is ${LOGFILE}"
>
> +run_create_and_open ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
> +
> +run_directaio ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
> +
> run_fillverifyholes ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
>
> run_renamewriterace ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
> @@ -573,6 +1003,28 @@ run_mmaptruncate ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
>
> run_buildkernel ${LOGDIR} ${DEVICE} ${MOUNTPOINT} ${KERNELSRC}
>
> +run_splice ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
> +
> +run_sendfile ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
> +
> +run_mmap ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
> +
> +run_reserve_space ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
> +
> +run_inline_data ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
> +
> +run_xattr_test ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
> +
> +run_reflink_test ${LOGDIR} ${DEVICE} ${MOUNTPOINT}
> +
> +# For tools test.
> +
> +run_mkfs ${LOGDIR} ${DEVICE}
> +
> +run_tunefs ${LOGDIR} ${DEVICE}
> +
> +run_backup_super ${LOGDIR} ${DEVICE}
> +
> ENDRUN=$(date +%s)
>
> DIFF=$(( ${ENDRUN} - ${STARTRUN} ))
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://oss.oracle.com/pipermail/ocfs2-test-devel/attachments/20100629/d1aafd11/attachment.html
More information about the Ocfs2-test-devel
mailing list