[Ocfs2-test-devel] [PATCH 01/11] xattr-multi-run
Marcos E. Matsunaga
Marcos.Matsunaga at oracle.com
Thu Jun 17 03:50:28 PDT 2010
See my comments
Regards,
Marcos Eduardo Matsunaga
Oracle USA
Linux Engineering
“The statements and opinions expressed here are my own and do not
necessarily represent those of Oracle Corporation.”
On 06/16/2010 09:37 PM, tristan wrote:
> Trivial comments inlined:)
>
>
> Marcos Matsunaga wrote:
>> ocfs2-test: changed to accept an alternate NIC to be used by the test.
>>
>> - Made the logfiles names more consistent among tests.
>> - replaced some hard coded parameters by variables. Also included the
>> architecture in the logfile name to make them specific. Useful when
>> storing logfiles in a shared directory.
>> - Additional change from the previous version. Made the logfile starting
>> with the name instead of date. Makes it more visible and clean.
>>
>> Signed-off-by: Marcos Matsunaga <Marcos.Matsunaga at oracle.com>
>> Signed-off-by: Tristan Ye <tristan.ye at oracle.com>
>> ---
>> programs/xattr_tests/xattr-multi-run.sh | 66
>> +++++++++++++++++++------------
>> 1 files changed, 40 insertions(+), 26 deletions(-)
>>
>> diff --git a/programs/xattr_tests/xattr-multi-run.sh
>> b/programs/xattr_tests/xattr-multi-run.sh
>> index dd5aa28..9c7567c 100755
>> --- a/programs/xattr_tests/xattr-multi-run.sh
>> +++ b/programs/xattr_tests/xattr-multi-run.sh
>> @@ -58,9 +58,12 @@ REMOTE_UMOUNT_BIN="${BINDIR}/remote_umount.py"
>> MKFS_BIN="`which sudo` -u root `which mkfs.ocfs2`"
>> CHMOD_BIN="`which sudo` -u root `which chmod`"
>> CHOWN_BIN="`which sudo` -u root `which chown`"
>> +IFCONFIG_BIN="`which sudo` -u root `which ifconfig`"
>>
>> XATTR_TEST_BIN="${BINDIR}/xattr-multi-test"
>>
>> +LABEL="ocfs2-xattr-multi-test-`uname -m`"
>> +SLOTS=2
>> DEFAULT_LOG="multiple-xattr-test-logs"
>> LOG_OUT_DIR=
>> LOG_FILE=
>> @@ -82,6 +85,8 @@ declare -i MPI_RANKS
>> MPI_HOSTS=
>> MPI_ACCESS_METHOD="ssh"
>> MPI_PLS_AGENT_ARG="-mca plm_rsh_agent ssh:rsh"
>> +MPI_MCA_BTL="-mca btl tcp,self"
>> +MPI_MCA_BTL_IF=""
>>
>> TEST_NO=0
>> TEST_PASS=0
>> @@ -140,11 +145,12 @@ exit_or_not()
>> ################################################################################
>>
>> f_usage()
>> {
>> - echo "usage: `basename ${0}` [-r MPI_Ranks] <-f MPI_Hosts> [-a
>> access method] [-o output] <-d <device>> <mountpoint path>"
>> + echo "usage: `basename ${0}` [-r MPI_Ranks] <-f MPI_Hosts> [-a
>> access method] [-o output] [-i interface] <-d <device>> <mountpoint
>> path>"
>> echo " -r size of MPI rank"
>> echo " -a access method for process propagation,should be
>> ssh or rsh,set ssh as a default method when omited."
>> echo " -f MPI hosts list,separated by comma,e.g -f
>> node1.us.oracle.com,node2.us.oracle.com."
>> echo " -o output directory for the logs"
>> + echo " -i Network Interface name to be used during tests."
>
> To be more exact, it would be better using "Network Interface name to
> be used for MPI messaging."
>
yes.. makes it clear.
>> echo " -d specify the device which has been formated as an
>> ocfs2 volume."
>> echo " <mountpoint path> path of mountpoint where the
>> ocfs2 volume will be mounted on."
>> exit 1;
>> @@ -157,13 +163,14 @@ f_getoptions()
>> exit 1
>> fi
>>
>> - while getopts "o:d:r:f:a:h:" options; do
>> + while getopts "o:d:r:f:a:h:i:" options; do
>> case $options in
>> r ) MPI_RANKS="$OPTARG";;
>> f ) MPI_HOSTS="$OPTARG";;
>> o ) LOG_OUT_DIR="$OPTARG";;
>> d ) OCFS2_DEVICE="$OPTARG";;
>> a ) MPI_ACCESS_METHOD="$OPTARG";;
>> + i ) INTERFACE="$OPTARG";;
>> h ) f_usage
>> exit 1;;
>> * ) f_usage
>> @@ -188,6 +195,14 @@ f_setup()
>> REMOTE_SH_BIN=${RSH_BIN}
>> fi
>>
>> + if [ ! -z "${INTERFACE}" ]; then
>> + ${IFCONFIG_BIN} ${INTERFACE} >/dev/null 2>&1 || {
>> + echo "Invalid NIC";
>> + f_usage;
>> + } + MPI_MCA_BTL_IF="-mca btl_tcp_if_include
>> ${INTERFACE}"
> else
>
> MPI_MCA_BTL_IF="-mca btl_tcp_if_include eth0"
>
> I guess we'd better have a default value if folks specify nothing.
>
if nothing is specified, openmpi will default to eth0.
>
>> + fi;
>> +
>> if [ -z "${MOUNT_POINT}" ];then f_usage
>> else
>> @@ -211,9 +226,9 @@ f_setup()
>> ${MKDIR} -p ${LOG_OUT_DIR} || exit 1
>>
>>
>> - LOG_POSTFIX=$(date +%Y%m%d-%H%M%S)
>> - LOG_FILE="`dirname ${LOG_OUT_DIR}`/`basename
>> ${LOG_OUT_DIR}`/xattr-multiple-test-log-${LOG_POSTFIX}.log"
>> - RUN_LOG_FILE="`dirname ${LOG_OUT_DIR}`/`basename
>> ${LOG_OUT_DIR}`/run-${LOG_POSTFIX}.log"
>> + LOG_SUFIX=$(date +%F-%H-%M-%S)
>> + LOG_FILE="`dirname ${LOG_OUT_DIR}`/`basename
>> ${LOG_OUT_DIR}`/xattr-multiple-test-log-`uname -m`-${LOG_SUFIX}.log"
>> + RUN_LOG_FILE="`dirname ${LOG_OUT_DIR}`/`basename
>> ${LOG_OUT_DIR}`/xattr-multiple-test-log-run-`uname -m`-${LOG_SUFIX}.log"
>>
>> if [ -z "$MPI_HOSTS" ];then
>> f_usage
>> @@ -228,24 +243,23 @@ f_setup()
>>
>> ${CHMOD_BIN} -R 777 ${MOUNT_POINT}
>>
>> - ${CHOWN_BIN} -R ${USERNAME}:${GROUPNAME} ${MOUNT_POINT}
>> + ${CHOWN_BIN} -R ${USERNAME}:${GROUPNAME} ${MOUNT_POINT}
>>
>> - WORKPLACE="`dirname ${MOUNT_POINT}`/`basename
>> ${MOUNT_POINT}`/multi_xattr_test_place"
>> -
>> + WORKPLACE="`dirname ${MOUNT_POINT}`/`basename
>> ${MOUNT_POINT}`/multi_xattr_test_place"
>> }
>>
>> f_do_mkfs_and_mount()
>> {
>> echo -n "Mkfsing device(-b ${BLOCKSIZE} -C ${CLUSTERSIZE}):
>> "|tee -a ${RUN_LOG_FILE}
>>
>> - echo y|${MKFS_BIN} --fs-features=xattr -b ${BLOCKSIZE} -C
>> ${CLUSTERSIZE} -N ${SLOTS} -L ocfs2-xattr-multi-test ${OCFS2_DEVICE}
>> ${BLOCKNUMS}>>${RUN_LOG_FILE} 2>&1
>> + echo y|${MKFS_BIN} --fs-features=xattr -b ${BLOCKSIZE} -C
>> ${CLUSTERSIZE} -N ${SLOTS} -L ${LABEL} ${OCFS2_DEVICE}
>> ${BLOCKNUMS}>>${RUN_LOG_FILE} 2>&1
>>
>> RET=$?
>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>> exit_or_not ${RET}
>>
>> echo -n "Mounting device ${OCFS2_DEVICE} to
>> nodes(${MPI_HOSTS}):"|tee -a ${RUN_LOG_FILE}
>> - ${REMOTE_MOUNT_BIN} -l ocfs2-xattr-multi-test -m ${MOUNT_POINT}
>> -n ${MPI_HOSTS}>>${RUN_LOG_FILE} 2>&1
>> + ${REMOTE_MOUNT_BIN} -l ${LABEL} -m ${MOUNT_POINT} -n
>> ${MPI_HOSTS}>>${RUN_LOG_FILE} 2>&1
>> RET=$?
>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>> exit_or_not ${RET}
>> @@ -280,10 +294,10 @@ f_runtest()
>> do
>> for filetype in normal directory symlink
>> do
>> - echo -e "Testing Binary:\t\t${MPIRUN}
>> ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0
>> -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 20 -n
>> ${namespace} -t ${filetype} -l 50 -s 200 ${WORKPLACE}">>${LOG_FILE}
>> + echo -e "Testing Binary:\t\t${MPIRUN}
>> ${MPI_PLS_AGENT_ARG} ${MPI_MCA_BTL} ${MPI_MCA_BTL_IF} -np
>> ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 20 -n
>> ${namespace} -t ${filetype} -l 50 -s 200 ${WORKPLACE}">>${LOG_FILE}
>> echo "********${namespace} mode on
>> ${filetype}********">>${LOG_FILE}
>>
>> - ${SUDO} ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self
>> -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 20 -n ${namespace} -t ${filetype} -l 50 -s
>> 200 ${WORKPLACE}>>${LOG_FILE} 2>&1
>> + ${SUDO} ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_MCA_BTL}
>> ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 20 -n ${namespace} -t ${filetype} -l 50 -s
>> 200 ${WORKPLACE}>>${LOG_FILE} 2>&1
>> rc=$?
>> if [ "$rc" != "0" ];then
>> if [ "$namespace" == "user" -a "$filetype" ==
>> "symlink" ]; then
>> @@ -323,8 +337,8 @@ f_runtest()
>> echo >>${LOG_FILE}
>> echo
>> "==========================================================">>${LOG_FILE}
>>
>> for((i=0;i<4;i++));do
>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS}
>> --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10 -n user -t normal -l
>> 50 -s 100 ${WORKPLACE}">>${LOG_FILE}
>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 10 -n user -t normal -l 50 -s 100
>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> ${MPI_MCA_BTL} ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 10 -n user -t normal -l 50 -s 100
>> ${WORKPLACE}">>${LOG_FILE}
>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_MCA_BTL}
>> ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 10 -n user -t normal -l 50 -s 100
>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>> rc=$?
>> if [ ! "$rc" == "0" ];then
>> echo_failure |tee -a ${RUN_LOG_FILE}
>> @@ -347,8 +361,8 @@ f_runtest()
>> echo -ne "[${TEST_NO}] Check Max Multinode Xattr
>> EA_Name_Length:">> ${LOG_FILE}
>> echo >>${LOG_FILE}
>> echo
>> "==========================================================">>${LOG_FILE}
>>
>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>> btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host
>> ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 4 -n user -t normal -l 255 -s
>> 300 ${WORKPLACE}">>${LOG_FILE}
>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 4 -n user -t normal -l 255 -s 300
>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> ${MPI_MCA_BTL} ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 4 -n user -t normal -l 255 -s 300
>> ${WORKPLACE}">>${LOG_FILE}
>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_MCA_BTL} ${MPI_MCA_BTL_IF}
>> -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 4 -n
>> user -t normal -l 255 -s 300 ${WORKPLACE}>>${LOG_FILE} 2>&1
>> RET=$?
>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>> exit_or_not ${RET}
>> @@ -363,8 +377,8 @@ f_runtest()
>> echo -ne "[${TEST_NO}] Check Max Multinode Xattr EA_Size:">>
>> ${LOG_FILE}
>> echo >>${LOG_FILE}
>> echo
>> "==========================================================">>${LOG_FILE}
>>
>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS}
>> --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1 -n user -t normal -l
>> 50 -s 65536 ${WORKPLACE}">>${LOG_FILE}
>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 1 -n user -t normal -l 50 -s 65536
>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> ${MPI_MCA_BTL} ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 1 -n user -t normal -l 50 -s 65536
>> ${WORKPLACE}">>${LOG_FILE}
>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_MCA_BTL}
>> ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 1 -n user -t normal -l 50 -s 65536
>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>> RET=$?
>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>> exit_or_not ${RET}
>> @@ -379,8 +393,8 @@ f_runtest()
>> echo -ne "[${TEST_NO}] Check Huge Multinode Xattr
>> EA_Entry_Nums:">> ${LOG_FILE}
>> echo >>${LOG_FILE}
>> echo
>> "==========================================================">>${LOG_FILE}
>>
>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS}
>> --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10000 -n user -t normal
>> -l 100 -s 200 ${WORKPLACE}">>${LOG_FILE}
>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 10000 -n user -t normal -l 100 -s 200
>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> ${MPI_MCA_BTL} ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 10000 -n user -t normal -l 100 -s 200
>> ${WORKPLACE}">>${LOG_FILE}
>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_MCA_BTL}
>> ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 10000 -n user -t normal -l 100 -s 200
>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>> RET=$?
>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>> exit_or_not ${RET}
>> @@ -395,8 +409,8 @@ f_runtest()
>> echo -ne "[${TEST_NO}] Check All Max Multinode Xattr
>> Arguments Together:">> ${LOG_FILE}
>> echo >>${LOG_FILE}
>> echo
>> "==========================================================">>${LOG_FILE}
>>
>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS}
>> --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal
>> -l 255 -s 65536 ${WORKPLACE}">>${LOG_FILE}
>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 65536
>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> ${MPI_MCA_BTL} ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 65536
>> ${WORKPLACE}">>${LOG_FILE}
>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_MCA_BTL}
>> ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 65536
>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>> RET=$?
>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>> exit_or_not ${RET}
>> @@ -411,8 +425,8 @@ f_runtest()
>> echo -ne "[${TEST_NO}] Launch Concurrent Adding Test:">>
>> ${LOG_FILE}
>> echo >>${LOG_FILE}
>> echo
>> "==========================================================">>${LOG_FILE}
>>
>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS}
>> --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal
>> -l 255 -s 5000 -o -r -k ${WORKPLACE}">>${LOG_FILE}
>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 5000 -o -r
>> -k ${WORKPLACE}>>${LOG_FILE} 2>&1
>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> ${MPI_MCA_BTL} ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 5000 -o -r
>> -k ${WORKPLACE}">>${LOG_FILE}
>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_MCA_BTL}
>> ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 5000 -o -r
>> -k ${WORKPLACE}>>${LOG_FILE} 2>&1
>> RET=$?
>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>> exit_or_not ${RET}
>> @@ -427,8 +441,8 @@ f_runtest()
>> echo -ne "[${TEST_NO}] Launch MultiNode Xattr Stress
>> Test:">> ${LOG_FILE}
>> echo >>${LOG_FILE}
>> echo
>> "==========================================================">>${LOG_FILE}
>>
>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS}
>> --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 2000 -n user -t normal
>> -l 255 -s 5000 -r -k ${WORKPLACE}">>${LOG_FILE}
>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 2000 -n user -t normal -l 255 -s 5000 -r
>> -k ${WORKPLACE}>>${LOG_FILE} 2>&1
>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG}
>> ${MPI_MCA_BTL} ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 2000 -n user -t normal -l 255 -s 5000 -r
>> -k ${WORKPLACE}">>${LOG_FILE}
>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_MCA_BTL}
>> ${MPI_MCA_BTL_IF} -np ${MPI_RANKS} --host ${MPI_HOSTS}
>> ${XATTR_TEST_BIN} -i 1 -x 2000 -n user -t normal -l 255 -s 5000 -r
>> -k ${WORKPLACE}>>${LOG_FILE} 2>&1
>> RET=$?
>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>> exit_or_not ${RET}
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://oss.oracle.com/pipermail/ocfs2-test-devel/attachments/20100617/9b65420f/attachment-0001.html
More information about the Ocfs2-test-devel
mailing list