[Ocfs2-test-devel] [PATCH 1/1] Ocfs2-test: Changes needed from openmpi-1.2.5 to 1.3.2
tristan
tristan.ye at oracle.com
Wed Jan 6 17:31:43 PST 2010
Marcos E. Matsunaga wrote:
> Hi Tristan,
>
> I found the source of the problem on i686. It gets into a loop because
> eth0 on one of the nodes was defined with two virtual addresses. Using
> eth1 made the problem go away. I'm going to make a change on the
> functions to receive the option of using a specific NIC, if specified
> by the call. I will also add this option to the scripts once I'm done
> with 1.6 tests. Right now, I have it hard coded for i686.
>
> The virtual addresses were created by the 11gR2 installation.
Cool, Now we are sure it was nothing to do with the arch.
Normally, a default setting(specified nothing for 'btl_tcp_if_include' parameter as my patch did) will make sense, since it will make most of mpiruning as expected without
running into loop in 1.3.2(in 1.2.5, you do need to specify a specific one, very wired), as in some special cases, let user specify the ethernet interface for communication will also be a good plus:-)
Tristan.
> Regards,
>
> Marcos Eduardo Matsunaga
>
> Oracle USA
> Linux Engineering
>
> “The statements and opinions expressed here are my own and do not
> necessarily represent those of Oracle Corporation.”
>
>
> On 12/29/2009 10:16 PM, Marcos E. Matsunaga wrote:
>> This is all i686 to i686... The path is the same, but different
>> locations to each one of the archs. If you look at
>> /scratch/mmatsuna/ocfs2test, you will notice it is a link to
>> /usr/local/links/ocfs2test, which is a link to
>> /scratch/mmatsuna/runtest_el5_<arch> directory. That's the real
>> location of the binaries so, each arch has its own set of binaries
>> and they do not get mixed up.
>>
>> It seems to me that openmpi on i686 is acting as x86_64 without the
>> fix. Very weird. I'll be checking it again tomorrow.
>> Regards,
>>
>> Marcos Eduardo Matsunaga
>>
>> Oracle USA
>> Linux Engineering
>>
>> “The statements and opinions expressed here are my own and do not
>> necessarily represent those of Oracle Corporation.”
>>
>>
>> On 12/29/2009 08:29 PM, tristan wrote:
>>> Marcos E. Matsunaga wrote:
>>>> Tristan.
>>>> One comment.
>>>>
>>>> Instead of making SLOTS=4, you could add to the end of f_getoptions
>>>> the
>>>> following:
>>>>
>>>> echo $MPI_HOSTS|sed -e 's/,/\n/g' >/tmp/$$
>>>> SLOTS=`cat /tmp/$$ |wc -l`
>>>> rm -f /tmp/$$
>>>>
>>>> That way, it will always format the partition with the number of nodes
>>>> specified.
>>>
>>> Good point, it's better to determine the slot number by mpi hosts.
>>>
>>>> Also, SLOTS is defined, but not used anywhere. You should make the
>>>> MKFS_BIN line to include "-N ${SLOTS}" instead of "-N 2".
>>>
>>> Did I hardcode this before? Oops, I may do this for debugging, and
>>> forgot to correct this afterward...
>>> Thanks for pointing this out!
>>>
>>>> One thing that I found interesting is that it works fine on x86_64,
>>>> but
>>>> on i686, it has the same behavior that I reported you before. It stays
>>>> in this loop:
>>>
>>> Interesting, what did you mean eactly? It hangs when communicating
>>> between x86_64 and i686, or between i686 and i686?
>>>
>>> You kept the mpi binary in a shared volume among multiple nodes?
>>> will this hurt the executing of mpi binary on different arches but
>>> with same ELF format?
>>>
>>>
>>>
>>> Tristan.
>>>>
>>>> 14:19:48.575946 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
>>>> {fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
>>>> {fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
>>>> {fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000009>
>>>> 14:19:48.576051 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
>>>> {fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
>>>> {fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
>>>> {fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000009>
>>>> 14:19:48.576156 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
>>>> {fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
>>>> {fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
>>>> {fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000009>
>>>> 14:19:48.576262 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
>>>> {fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
>>>> {fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
>>>> {fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000009>
>>>> 14:19:48.576369 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
>>>> {fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
>>>> {fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
>>>> {fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000009>
>>>> 14:19:48.576498 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
>>>> {fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
>>>> {fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
>>>> {fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000008>
>>>>
>>>> I still didn't have a chance to test it on ia64 and ppc as I'm waiting
>>>> for other tests to complete before I test this patch.
>>>>
>>>> Regards,
>>>>
>>>> Marcos Eduardo Matsunaga
>>>>
>>>> Oracle USA
>>>> Linux Engineering
>>>>
>>>> �The statements and opinions expressed here are my own and do not
>>>> necessarily represent those of Oracle Corporation.�
>>>>
>>>>
>>>> On 12/21/2009 12:44 AM, Tristan Ye wrote:
>>>>> There are still some corners where changes needed for latest 1.3.2
>>>>> still untouched there, this patch is going to correct them
>>>>> accordingly.
>>>>>
>>>>> Marcos, will you please help to verify if it could solve your issues
>>>>> encountered in xattr tests before giving a SOB on this patch.
>>>>>
>>>>> Signed-off-by: Tristan Ye <tristan.ye at oracle.com>
>>>>> ---
>>>>> programs/dx_dirs_tests/multi_index_dir_run.sh | 4 +-
>>>>> .../multi_inode_alloc_perf.sh | 6 +-
>>>>> programs/reflink_tests/multi_reflink_test_run.sh | 4 +-
>>>>> programs/xattr_tests/xattr-multi-run.sh | 67 ++++++--------------
>>>>> 4 files changed, 26 insertions(+), 55 deletions(-)
>>>>>
>>>>> diff --git a/programs/dx_dirs_tests/multi_index_dir_run.sh
>>>>> b/programs/dx_dirs_tests/multi_index_dir_run.sh
>>>>> index 735fc79..3a3624c 100755
>>>>> --- a/programs/dx_dirs_tests/multi_index_dir_run.sh
>>>>> +++ b/programs/dx_dirs_tests/multi_index_dir_run.sh
>>>>> @@ -63,7 +63,7 @@ DEFAULT_RANKS=4
>>>>> MPI_RANKS=
>>>>> MPI_HOSTS=
>>>>> MPI_ACCESS_METHOD="ssh"
>>>>> -MPI_PLS_AGENT_ARG="-mca pls_rsh_agent ssh:rsh"
>>>>> +MPI_PLS_AGENT_ARG="-mca plm_rsh_agent ssh:rsh"
>>>>> MPI_BTL_ARG="-mca btl tcp,self"
>>>>> MPI_BTL_IF_ARG=
>>>>>
>>>>> @@ -123,7 +123,7 @@ function f_setup()
>>>>> f_getoptions $*
>>>>>
>>>>> if [ "$MPI_ACCESS_METHOD" = "rsh" ];then
>>>>> - MPI_PLS_AGENT_ARG="-mca pls_rsh_agent rsh:ssh"
>>>>> + MPI_PLS_AGENT_ARG="-mca plm_rsh_agent rsh:ssh"
>>>>> fi
>>>>>
>>>>> if [ -z "${MOUNT_POINT}" ];then diff --git
>>>>> a/programs/inode_alloc_perf_tests/multi_inode_alloc_perf.sh
>>>>> b/programs/inode_alloc_perf_tests/multi_inode_alloc_perf.sh
>>>>> index e419961..a815ef0 100755
>>>>> --- a/programs/inode_alloc_perf_tests/multi_inode_alloc_perf.sh
>>>>> +++ b/programs/inode_alloc_perf_tests/multi_inode_alloc_perf.sh
>>>>> @@ -88,7 +88,7 @@ ORIG_COMMITID=
>>>>> declare -i MPI_RANKS
>>>>> MPI_HOSTS=
>>>>> MPI_ACCESS_METHOD="ssh"
>>>>> -MPI_PLS_AGENT_ARG="-mca pls_rsh_agent ssh:rsh"
>>>>> +MPI_PLS_AGENT_ARG="-mca plm_rsh_agent ssh:rsh"
>>>>>
>>>>> set -o pipefail
>>>>>
>>>>> @@ -196,7 +196,7 @@ function f_check()
>>>>> f_getoptions $*
>>>>>
>>>>> if [ "$MPI_ACCESS_METHOD" = "rsh" ];then
>>>>> - MPI_PLS_AGENT_ARG="-mca pls_rsh_agent rsh:ssh"
>>>>> + MPI_PLS_AGENT_ARG="-mca plm_rsh_agent rsh:ssh"
>>>>> fi
>>>>>
>>>>> if [ -z "${MOUNT_POINT}" ];then
>>>>> @@ -314,7 +314,7 @@ f_run_test_one_time()
>>>>> f_exit_or_not ${RET}
>>>>>
>>>>> f_LogRunMsg "<Iteration ${1}>Run inode alloc perf tests among
>>>>> nodes ${MPI_HOSTS}:"
>>>>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>>>>> btl_tcp_if_include eth0 --host ${MPI_HOSTS} ${LOCAL_TEST_RUNNER}
>>>>> -l ${LOCAL_LOG_DIR} -b ${LABELNAME} -t ${KERNEL_TARBALL} -k
>>>>> ${KERNEL_PATH} -p ${PATCH_PATH} -s ${ISCSI_SERVER} ${MOUNT_POINT}
>>>>> >>${LOG_FILE} 2>&1
>>>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self --host
>>>>> ${MPI_HOSTS} ${LOCAL_TEST_RUNNER} -l ${LOCAL_LOG_DIR} -b
>>>>> ${LABELNAME} -t ${KERNEL_TARBALL} -k ${KERNEL_PATH} -p
>>>>> ${PATCH_PATH} -s ${ISCSI_SERVER} ${MOUNT_POINT} >>${LOG_FILE} 2>&1
>>>>> RET=$?
>>>>> f_echo_status ${RET} | tee -a ${RUN_LOG_FILE}
>>>>> f_exit_or_not ${RET}
>>>>> diff --git a/programs/reflink_tests/multi_reflink_test_run.sh
>>>>> b/programs/reflink_tests/multi_reflink_test_run.sh
>>>>> index f389172..13b72e0 100755
>>>>> --- a/programs/reflink_tests/multi_reflink_test_run.sh
>>>>> +++ b/programs/reflink_tests/multi_reflink_test_run.sh
>>>>> @@ -74,7 +74,7 @@ DEFAULT_RANKS=4
>>>>> MPI_RANKS=
>>>>> MPI_HOSTS=
>>>>> MPI_ACCESS_METHOD="ssh"
>>>>> -MPI_PLS_AGENT_ARG="-mca pls_rsh_agent ssh:rsh"
>>>>> +MPI_PLS_AGENT_ARG="-mca plm_rsh_agent ssh:rsh"
>>>>> MPI_BTL_ARG="-mca btl tcp,self"
>>>>> MPI_BTL_IF_ARG=
>>>>>
>>>>> @@ -135,7 +135,7 @@ function f_setup()
>>>>> f_getoptions $*
>>>>>
>>>>> if [ "$MPI_ACCESS_METHOD" = "rsh" ];then
>>>>> - MPI_PLS_AGENT_ARG="-mca pls_rsh_agent rsh:ssh"
>>>>> + MPI_PLS_AGENT_ARG="-mca plm_rsh_agent rsh:ssh"
>>>>> fi
>>>>>
>>>>> if [ -z "${MOUNT_POINT}" ];then
>>>>> diff --git a/programs/xattr_tests/xattr-multi-run.sh
>>>>> b/programs/xattr_tests/xattr-multi-run.sh
>>>>> index cb6984f..701d5fb 100755
>>>>> --- a/programs/xattr_tests/xattr-multi-run.sh
>>>>> +++ b/programs/xattr_tests/xattr-multi-run.sh
>>>>> @@ -71,18 +71,17 @@ OCFS2_DEVICE=
>>>>> BLOCKSIZE=
>>>>> CLUSTERSIZE=
>>>>> BLOCKNUMS=
>>>>> +SLOTS=4
>>>>>
>>>>> WORKPLACE=
>>>>>
>>>>> TMP_DIR=/tmp
>>>>> -DEFAULT_HOSTFILE=".openmpi_hostfile"
>>>>> DEFAULT_RANKS=4
>>>>>
>>>>> declare -i MPI_RANKS
>>>>> MPI_HOSTS=
>>>>> -MPI_HOSTFILE=
>>>>> MPI_ACCESS_METHOD="ssh"
>>>>> -MPI_PLS_AGENT_ARG="-mca pls_rsh_agent ssh:rsh"
>>>>> +MPI_PLS_AGENT_ARG="-mca plm_rsh_agent ssh:rsh"
>>>>>
>>>>> TEST_NO=0
>>>>> TEST_PASS=0
>>>>> @@ -176,31 +175,6 @@ f_getoptions()
>>>>>
>>>>> }
>>>>>
>>>>> -f_create_hostfile()
>>>>> -{
>>>>> - MPI_HOSTFILE="${TMP_DIR}/${DEFAULT_HOSTFILE}"
>>>>> - TMP_FILE="${TMP_DIR}/.tmp_openmpi_hostfile_$$"
>>>>> -
>>>>> - echo ${MPI_HOSTS}|sed -e 's/,/\n/g'>$TMP_FILE
>>>>> -
>>>>> - if [ -f "$MPI_HOSTFILE" ];then
>>>>> - ${RM} -rf ${MPI_HOSTFILE}
>>>>> - fi
>>>>> -
>>>>> - while read line
>>>>> - do
>>>>> - if [ -z $line ];then
>>>>> - continue
>>>>> - fi
>>>>> -
>>>>> - echo "$line">>$MPI_HOSTFILE
>>>>> -
>>>>> - done<$TMP_FILE
>>>>> -
>>>>> - ${RM} -rf $TMP_FILE
>>>>> -}
>>>>> -
>>>>> -
>>>>> f_setup()
>>>>> {
>>>>> if [ "${UID}" = "0" ];then
>>>>> @@ -211,7 +185,7 @@ f_setup()
>>>>> f_getoptions $*
>>>>>
>>>>> if [ "$MPI_ACCESS_METHOD" = "rsh" ];then
>>>>> - MPI_PLS_AGENT_ARG="-mca pls_rsh_agent rsh:ssh"
>>>>> + MPI_PLS_AGENT_ARG="-mca plm_rsh_agent rsh:ssh"
>>>>> REMOTE_SH_BIN=${RSH_BIN}
>>>>> fi
>>>>>
>>>>> @@ -244,11 +218,8 @@ f_setup()
>>>>>
>>>>> if [ -z "$MPI_HOSTS" ];then
>>>>> f_usage
>>>>> - else
>>>>> - f_create_hostfile
>>>>> fi
>>>>>
>>>>> -
>>>>> ${CHMOD_BIN} -R 777 ${MOUNT_POINT}
>>>>>
>>>>> ${CHOWN_BIN} -R ${USERNAME}:${GROUPNAME} ${MOUNT_POINT}
>>>>> @@ -303,10 +274,10 @@ f_runtest()
>>>>> do
>>>>> for filetype in normal directory symlink
>>>>> do
>>>>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host
>>>>> ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 20 -n ${namespace} -t
>>>>> ${filetype} -l 50 -s 200 ${WORKPLACE}">>${LOG_FILE}
>>>>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 20 -n ${namespace} -t ${filetype} -l 50
>>>>> -s 200 ${WORKPLACE}">>${LOG_FILE}
>>>>> echo "********${namespace} mode on ${filetype}********">>${LOG_FILE}
>>>>>
>>>>> - ${SUDO} ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>>>>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 20 -n ${namespace} -t ${filetype} -l 50
>>>>> -s 200 ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> + ${SUDO} ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np
>>>>> ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 20 -n
>>>>> ${namespace} -t ${filetype} -l 50 -s 200 ${WORKPLACE}>>${LOG_FILE}
>>>>> 2>&1
>>>>> rc=$?
>>>>> if [ "$rc" != "0" ];then
>>>>> if [ "$namespace" == "user" -a "$filetype" == "symlink" ]; then
>>>>> @@ -346,8 +317,8 @@ f_runtest()
>>>>> echo >>${LOG_FILE}
>>>>> echo
>>>>> "==========================================================">>${LOG_FILE}
>>>>>
>>>>> for((i=0;i<4;i++));do
>>>>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host
>>>>> ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10 -n user -t normal -l 50
>>>>> -s 100 ${WORKPLACE}">>${LOG_FILE}
>>>>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>>>>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 10 -n user -t normal -l 50 -s 100
>>>>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 10 -n user -t normal -l 50 -s 100
>>>>> ${WORKPLACE}">>${LOG_FILE}
>>>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np
>>>>> ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10 -n
>>>>> user -t normal -l 50 -s 100 ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> rc=$?
>>>>> if [ ! "$rc" == "0" ];then
>>>>> echo_failure |tee -a ${RUN_LOG_FILE}
>>>>> @@ -370,8 +341,8 @@ f_runtest()
>>>>> echo -ne "[${TEST_NO}] Check Max Multinode Xattr
>>>>> EA_Name_Length:">> ${LOG_FILE}
>>>>> echo >>${LOG_FILE}
>>>>> echo
>>>>> "==========================================================">>${LOG_FILE}
>>>>>
>>>>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host
>>>>> ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 4 -n user -t normal -l 255
>>>>> -s 300 ${WORKPLACE}">>${LOG_FILE}
>>>>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>>>>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 4 -n user -t normal -l 255 -s 300
>>>>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 4 -n user -t normal -l 255 -s 300
>>>>> ${WORKPLACE}">>${LOG_FILE}
>>>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np
>>>>> ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 4 -n
>>>>> user -t normal -l 255 -s 300 ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> RET=$?
>>>>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>>>>> exit_or_not ${RET}
>>>>> @@ -386,8 +357,8 @@ f_runtest()
>>>>> echo -ne "[${TEST_NO}] Check Max Multinode Xattr EA_Size:">>
>>>>> ${LOG_FILE}
>>>>> echo >>${LOG_FILE}
>>>>> echo
>>>>> "==========================================================">>${LOG_FILE}
>>>>>
>>>>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host
>>>>> ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1 -n user -t normal -l 50
>>>>> -s 65536 ${WORKPLACE}">>${LOG_FILE}
>>>>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>>>>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 1 -n user -t normal -l 50 -s 65536
>>>>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 1 -n user -t normal -l 50 -s 65536
>>>>> ${WORKPLACE}">>${LOG_FILE}
>>>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np
>>>>> ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1 -n
>>>>> user -t normal -l 50 -s 65536 ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> RET=$?
>>>>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>>>>> exit_or_not ${RET}
>>>>> @@ -402,8 +373,8 @@ f_runtest()
>>>>> echo -ne "[${TEST_NO}] Check Huge Multinode Xattr
>>>>> EA_Entry_Nums:">> ${LOG_FILE}
>>>>> echo >>${LOG_FILE}
>>>>> echo
>>>>> "==========================================================">>${LOG_FILE}
>>>>>
>>>>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host
>>>>> ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10000 -n user -t normal -l
>>>>> 100 -s 200 ${WORKPLACE}">>${LOG_FILE}
>>>>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>>>>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 10000 -n user -t normal -l 100 -s 200
>>>>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 10000 -n user -t normal -l 100 -s 200
>>>>> ${WORKPLACE}">>${LOG_FILE}
>>>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np
>>>>> ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10000
>>>>> -n user -t normal -l 100 -s 200 ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> RET=$?
>>>>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>>>>> exit_or_not ${RET}
>>>>> @@ -418,8 +389,8 @@ f_runtest()
>>>>> echo -ne "[${TEST_NO}] Check All Max Multinode Xattr Arguments
>>>>> Together:">> ${LOG_FILE}
>>>>> echo >>${LOG_FILE}
>>>>> echo
>>>>> "==========================================================">>${LOG_FILE}
>>>>>
>>>>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host
>>>>> ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l
>>>>> 255 -s 65536 ${WORKPLACE}">>${LOG_FILE}
>>>>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>>>>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 65536
>>>>> ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 65536
>>>>> ${WORKPLACE}">>${LOG_FILE}
>>>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np
>>>>> ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n
>>>>> user -t normal -l 255 -s 65536 ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> RET=$?
>>>>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>>>>> exit_or_not ${RET}
>>>>> @@ -434,8 +405,8 @@ f_runtest()
>>>>> echo -ne "[${TEST_NO}] Launch Concurrent Adding Test:">> ${LOG_FILE}
>>>>> echo >>${LOG_FILE}
>>>>> echo
>>>>> "==========================================================">>${LOG_FILE}
>>>>>
>>>>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host
>>>>> ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l
>>>>> 255 -s 5000 -o -r -k ${WORKPLACE}">>${LOG_FILE}
>>>>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>>>>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 5000 -o
>>>>> -r -k ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 5000 -o
>>>>> -r -k ${WORKPLACE}">>${LOG_FILE}
>>>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np
>>>>> ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n
>>>>> user -t normal -l 255 -s 5000 -o -r -k ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> RET=$?
>>>>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>>>>> exit_or_not ${RET}
>>>>> @@ -450,8 +421,8 @@ f_runtest()
>>>>> echo -ne "[${TEST_NO}] Launch MultiNode Xattr Stress Test:">>
>>>>> ${LOG_FILE}
>>>>> echo >>${LOG_FILE}
>>>>> echo
>>>>> "==========================================================">>${LOG_FILE}
>>>>>
>>>>> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host
>>>>> ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 2000 -n user -t normal -l
>>>>> 255 -s 5000 -r -k ${WORKPLACE}">>${LOG_FILE}
>>>>> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca
>>>>> btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 2000 -n user -t normal -l 255 -s 5000 -r
>>>>> -k ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca
>>>>> btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS}
>>>>> ${XATTR_TEST_BIN} -i 1 -x 2000 -n user -t normal -l 255 -s 5000 -r
>>>>> -k ${WORKPLACE}">>${LOG_FILE}
>>>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np
>>>>> ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 2000 -n
>>>>> user -t normal -l 255 -s 5000 -r -k ${WORKPLACE}>>${LOG_FILE} 2>&1
>>>>> RET=$?
>>>>> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
>>>>> exit_or_not ${RET}
>>>>
>>>
>>
>> _______________________________________________
>> Ocfs2-test-devel mailing list
>> Ocfs2-test-devel at oss.oracle.com
>> http://oss.oracle.com/mailman/listinfo/ocfs2-test-devel
More information about the Ocfs2-test-devel
mailing list