[Ocfs2-test-devel] [PATCH 5/5] Ocfs2-test: Add multi-nodes testing launcher for dx-dirs test
Marcos E. Matsunaga
Marcos.Matsunaga at oracle.com
Wed Feb 25 18:08:31 PST 2009
Tristan,
The reason I pointed is that I use the logfiles centralized, and others
may do the same. It is just a thought that it may be easier to track
down a problem if you don't have to scramble a specific node information
in a common log.
Regards,
Marcos Eduardo Matsunaga
Oracle USA
Linux Engineering
“The statements and opinions expressed here are my own and do not
necessarily represent those of Oracle Corporation.”
tristan.ye wrote:
> On Wed, 2009-02-25 at 08:50 -0500, Marcos E. Matsunaga wrote:
>
>> Just one comment here.. You have two logfiles. If O2TDIR or if the
>> logdir argument is on a shared partition (NFS or OCFS2), what are the
>> chances that you will be using a single logfile for RUN_LOG_FILE? Is
>> it meant to be that way or each node should have its own logfile?
>>
>
> Marcos,
>
> For these 2 logs, they're locally master node located. I did not keep
> any separate logs among slave nodes. since these 2 logs have traced
> running information for all nodes(such as hostname, rank number, and
> command name etc), it's good enough for me to backstrace the error so
> far.
>
> 1. The RUN_LOG_FILE is a simplified log ,by which we can easily get a
> general idea of what all testcases look like, survive or not.
> All testcases run in each node are sychronized, they are expected to be
> launched simultaneously among the nodes, therefore, a failure in each
> node will fail the test.
>
>
> 2. While LOG_FILE is a somewhat detailed log, where all running
> information were kept,it's a commmand level log, by which we can locate
> a error occured to one single testing cmd.
>
>
> Regards,
> Tristan
>
>
>
>
>> Regards,
>>
>> Marcos Eduardo Matsunaga
>>
>> Oracle USA
>> Linux Engineering
>>
>> “The statements and opinions expressed here are my own and do not
>> necessarily represent those of Oracle Corporation.”
>>
>>
>> Tristan Ye wrote:
>>
>>> This script will behave as openmpi binary launcher to perform
>>> following tests among multiple nodes for indexed-dirs on ocfs2.
>>>
>>> 1. Grow test
>>>
>>> 2. Rename test
>>>
>>> 3. Read test
>>>
>>> 4. Unlink test
>>>
>>> 5. Fillup test
>>>
>>> 6. Stress test
>>>
>>> Signed-off-by: Tristan Ye <tristan.ye at oracle.com>
>>> ---
>>> programs/dx_dirs_tests/multi_index_dir_run.sh | 432 +++++++++++++++++++++++++
>>> 1 files changed, 432 insertions(+), 0 deletions(-)
>>> create mode 100755 programs/dx_dirs_tests/multi_index_dir_run.sh
>>>
>>> diff --git a/programs/dx_dirs_tests/multi_index_dir_run.sh b/programs/dx_dirs_tests/multi_index_dir_run.sh
>>> new file mode 100755
>>> index 0000000..af81c44
>>> --- /dev/null
>>> +++ b/programs/dx_dirs_tests/multi_index_dir_run.sh
>>> @@ -0,0 +1,432 @@
>>> +#!/bin/bash
>>> +#
>>> +# vim: noexpandtab sw=8 ts=8 sts=0:
>>> +#
>>> +# multi_index_dir_run.sh
>>> +#
>>> +# description: This script will behave as openmpi binary launcher to
>>> +# perform following tests among multiple nodes for
>>> +# indexed-dirs on ocfs2.
>>> +#
>>> +# 1. Grow test
>>> +#
>>> +# 2. Rename test
>>> +#
>>> +# 3. Read test
>>> +#
>>> +# 4. Unlink test
>>> +#
>>> +# 5. Fillup test
>>> +#
>>> +# 6. Stress test
>>> +#
>>> +# Author: Tristan Ye, tristan.ye at oracle.com
>>> +#
>>> +# History: 10 Feb 2009
>>> +#
>>> +#
>>> +# Copyright (C) 2008 Oracle. All rights reserved.
>>> +#
>>> +# This program is free software; you can redistribute it and/or
>>> +# modify it under the terms of the GNU General Public
>>> +# License, version 2, as published by the Free Software Foundation.
>>> +#
>>> +# This program is distributed in the hope that it will be useful,
>>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>>> +# General Public License for more details.
>>> +#
>>> +
>>> +
>>> +################################################################################
>>> +# Global Variables
>>> +################################################################################
>>> +PATH=$PATH:/sbin # Add /sbin to the path for ocfs2 tools
>>> +export PATH=$PATH:.
>>> +
>>> +. ./config.sh
>>> +
>>> +MKFS_BIN="`which sudo` -u root `which mkfs.ocfs2`"
>>> +MOUNT_BIN="`which sudo` -u root `which mount`"
>>> +REMOTE_MOUNT_BIN="${BINDIR}/remote_mount.py"
>>> +UMOUNT_BIN="`which sudo` -u root `which umount`"
>>> +REMOTE_UMOUNT_BIN="${BINDIR}/remote_umount.py"
>>> +TEE_BIN=`which tee`
>>> +RM_BIN=`which rm`
>>> +TAR_BIN=`which tar`
>>> +MKDIR_BIN=`which mkdir`
>>> +TOUCH_BIN=`which touch`
>>> +DIFF_BIN=`which diff`
>>> +MOVE_BIN=`which mv`
>>> +CP_BIN=`which cp`
>>> +SED_BIN=`which sed`
>>> +CUT_BIN=`which cut`
>>> +CHOWN_BIN=`which chown`
>>> +CHMOD_BIN=`which chmod`
>>> +
>>> +SUDO="`which sudo` -u root"
>>> +
>>> +export PATH=$PATH:.
>>> +MULTI_INDEXED_DIRS_TEST_BIN="${BINDIR}/multi_index_dir"
>>> +
>>> +USERNAME=`id -un`
>>> +GROUPNAME=`id -gn`
>>> +
>>> +BLOCKSIZE=
>>> +CLUSTERSIZE=
>>> +SLOTS=4
>>> +JOURNALSIZE=
>>> +BLOCKS=
>>> +DEVICE=
>>> +LABELNAME=ocfs2-multi-indexed-dirs-tests
>>> +WORK_PLACE_DIRENT=multi-indexed-dirs-tests
>>> +WORK_PLACE=
>>> +
>>> +DEFAULT_LOG_DIR=${O2TDIR}/log
>>> +LOG_DIR=
>>> +RUN_LOG_FILE=
>>> +LOG_FILE=
>>> +MKFSLOG=
>>> +MOUNTLOG=
>>> +
>>> +DEFAULT_RANKS=4
>>> +MPI_RANKS=
>>> +MPI_HOSTS=
>>> +MPI_ACCESS_METHOD="ssh"
>>> +MPI_PLS_AGENT_ARG="-mca pls_rsh_agent ssh:rsh"
>>> +MPI_BTL_ARG="-mca btl tcp,self"
>>> +MPI_BTL_IF_ARG=
>>> +
>>> +TEST_NO=0
>>> +TEST_PASS=0
>>> +
>>> +set -o pipefail
>>> +
>>> +BOOTUP=color
>>> +RES_COL=80
>>> +MOVE_TO_COL="echo -en \\033[${RES_COL}G"
>>> +SETCOLOR_SUCCESS="echo -en \\033[1;32m"
>>> +SETCOLOR_FAILURE="echo -en \\033[1;31m"
>>> +SETCOLOR_WARNING="echo -en \\033[1;33m"
>>> +SETCOLOR_NORMAL="echo -en \\033[0;39m"
>>> +
>>> +################################################################################
>>> +# Utility Functions
>>> +################################################################################
>>> +function f_echo_success()
>>> +{
>>> + [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
>>> + echo -n "["
>>> + [ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS
>>> + echo -n $" PASS "
>>> + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
>>> + echo -n "]"
>>> +
>>> + return 0
>>> +}
>>> +
>>> +function f_echo_failure()
>>> +{
>>> + [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
>>> + echo -n "["
>>> + [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
>>> + echo -n $"FAILED"
>>> + [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
>>> + echo -n "]"
>>> +
>>> + return 1
>>> +}
>>> +
>>> +function f_echo_status()
>>> +{
>>> + if [ "${1}" == "0" ];then
>>> + f_echo_success
>>> + echo
>>> + else
>>> + f_echo_failure
>>> + echo
>>> + exit 1
>>> + fi
>>> +}
>>> +
>>> +function f_exit_or_not()
>>> +{
>>> + if [ "${1}" != "0" ];then
>>> + exit 1;
>>> + fi
>>> +}
>>> +
>>> +function f_usage()
>>> +{
>>> + echo "usage: `basename ${0}` [-r MPI_Ranks] <-f MPI_Hosts> [-a access method] [-o logdir] <-d <device>> <mountpoint path>"
>>> + echo " -r size of MPI rank"
>>> + echo " -a access method for process propagation,should be ssh or rsh,set ssh as a default method when omited."
>>> + echo " -f MPI hosts list,separated by comma,e.g -f node1.us.oracle.com,node2.us.oracle.com."
>>> + echo " -o output directory for the logs"
>>> + echo " -d specify the device which has been formated as an ocfs2 volume."
>>> + echo " <mountpoint path> path of mountpoint where the ocfs2 volume will be mounted on."
>>> + exit 1;
>>> +
>>> +}
>>> +function f_getoptions()
>>> +{
>>> + if [ $# -eq 0 ]; then
>>> + f_usage;
>>> + exit 1
>>> + fi
>>> +
>>> + while getopts "o:d:r:f:a:h:" options; do
>>> + case $options in
>>> + r ) MPI_RANKS="$OPTARG";;
>>> + f ) MPI_HOSTS="$OPTARG";;
>>> + o ) LOG_DIR="$OPTARG";;
>>> + d ) DEVICE="$OPTARG";;
>>> + a ) MPI_ACCESS_METHOD="$OPTARG";;
>>> + h ) f_usage
>>> + exit 1;;
>>> + * ) f_usage
>>> + exit 1;;
>>> + esac
>>> + done
>>> + shift $(($OPTIND -1))
>>> + MOUNT_POINT=${1}
>>> +}
>>> +
>>> +function f_setup()
>>> +{
>>> + if [ "${UID}" = "0" ];then
>>> + echo "Should not run tests as root"
>>> + exit 1
>>> + fi
>>> +
>>> + f_getoptions $*
>>> +
>>> + if [ "$MPI_ACCESS_METHOD" = "rsh" ];then
>>> + MPI_PLS_AGENT_ARG="-mca pls_rsh_agent rsh:ssh"
>>> + fi
>>> +
>>> + if [ -z "${MOUNT_POINT}" ];then
>>> + f_usage
>>> + else
>>> + if [ ! -d ${MOUNT_POINT} ]; then
>>> + echo "Mount point ${MOUNT_POINT} does not exist."
>>> + exit 1
>>> + else
>>> + #To assure that mount point will not end with a trailing '/'
>>> + if [ "`dirname ${MOUNT_POINT}`" = "/" ]; then
>>> + MOUNT_POINT="`dirname ${MOUNT_POINT}``basename ${MOUNT_POINT}`"
>>> + else
>>> + MOUNT_POINT="`dirname ${MOUNT_POINT}`/`basename ${MOUNT_POINT}`"
>>> + fi
>>> + fi
>>> + fi
>>> +
>>> + if [ -z "$MPI_HOSTS" ];then
>>> + f_usage
>>> + fi
>>> +
>>> + MPI_RANKS=${MPI_RANKS:-$DEFAULT_RANKS}
>>> +
>>> + LOG_DIR=${LOG_DIR:-$DEFAULT_LOG_DIR}
>>> + ${MKDIR_BIN} -p ${LOG_DIR} || exit 1
>>> +
>>> + RUN_LOG_FILE="`dirname ${LOG_DIR}`/`basename ${LOG_DIR}`/`date +%F-%H-%M-%S`-multi-indexed-dirs-tests-run.log"
>>> + LOG_FILE="`dirname ${LOG_DIR}`/`basename ${LOG_DIR}`/`date +%F-%H-%M-%S`-multi-indexed-dirs-tests.log"
>>> + MKFSLOG="`dirname ${LOG_DIR}`/`basename ${LOG_DIR}`/$$_mkfs.log"
>>> + MOUNTLOG="`dirname ${LOG_DIR}`/`basename ${LOG_DIR}`/$$_mount.log"
>>> +}
>>> +
>>> +function f_LogRunMsg()
>>> +{
>>> + echo -ne "$@"| ${TEE_BIN} -a ${RUN_LOG_FILE}
>>> +}
>>> +
>>> +function f_LogMsg()
>>> +{
>>> + echo "$(date +%Y/%m/%d,%H:%M:%S) $@" >>${LOG_FILE}
>>> +}
>>> +
>>> +function f_mkfs()
>>> +{
>>> + f_LogMsg "Mkfs volume ${DEVICE} by ${BLOCKSIZE} bs and ${CLUSTERSIZE} cs"
>>> + echo "y"|${MKFS_BIN} --fs-features=indexed-dirs -b ${BLOCKSIZE} -C ${CLUSTERSIZE} -L ${LABELNAME} -N ${SLOTS} ${DEVICE}>>${MKFSLOG} 2>&1
>>> + RET=$?
>>> +
>>> + if [ "${RET}" != "0" ];then
>>> + f_LogMsg "Mkfs failed"
>>> + return ${RET}
>>> + fi
>>> +
>>> + return 0
>>> +}
>>> +
>>> +function f_remote_mount()
>>> +{
>>> + f_LogMsg "Mounting device ${LABELNAME} to nodes(${MPI_HOSTS}):"
>>> + ${REMOTE_MOUNT_BIN} -l ${LABELNAME} -m ${MOUNT_POINT} -n ${MPI_HOSTS}>>${LOG_FILE} 2>&1
>>> + RET=$?
>>> +
>>> + if [ "${RET}" != "0" ];then
>>> + f_LogMsg "Remote failed"
>>> + return ${RET}
>>> + fi
>>> +
>>> + ${SUDO} chown -R ${USERNAME}:${GROUPNAME} ${MOUNT_POINT}
>>> + ${SUDO} chmod -R 777 ${MOUNT_POINT}
>>> +
>>> + WORK_PLACE=${MOUNT_POINT}/${WORK_PLACE_DIRENT}
>>> +
>>> + ${MKDIR_BIN} -p ${WORK_PLACE}
>>> +
>>> + return 0
>>> +}
>>> +
>>> +function f_remote_umount()
>>> +{
>>> + f_LogMsg "Remote umount from nodes(${MPI_HOSTS}):"
>>> + ${REMOTE_UMOUNT_BIN} -m ${MOUNT_POINT} -n ${MPI_HOSTS}>>${LOG_FILE} 2>&1
>>> +
>>> + RET=$?
>>> +
>>> + if [ "${RET}" != "0" ];then
>>> + f_LogMsg "Remote failed"
>>> + return ${RET}
>>> + fi
>>> +
>>> + return 0
>>> +}
>>> +
>>> +function f_runtest()
>>> +{
>>> + f_LogRunMsg "[*] Mkfs device ${DEVICE}:"
>>> + f_mkfs
>>> + RET=$?
>>> + f_echo_status ${RET}| tee -a ${RUN_LOG_FILE}
>>> + f_exit_or_not ${RET}
>>> +
>>> + f_LogRunMsg "[*] Remote Mount amongs nodes ${MPI_HOSTS}:"
>>> + f_remote_mount
>>> + RET=$?
>>> + f_echo_status ${RET}| tee -a ${RUN_LOG_FILE}
>>> + f_exit_or_not ${RET}
>>> +
>>> + ((TEST_NO++))
>>> + f_LogRunMsg "[${TEST_NO}] Basic Grow Test:"
>>> + f_LogMsg "[${TEST_NO}] Basic Grow Test, CMD:${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN} -i 10 -n 4000 -w ${WORK_PLACE} -g"
>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN} -i 10 -n 4000 -w ${WORK_PLACE} -g >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_echo_status ${RET}| tee -a ${RUN_LOG_FILE}
>>> + f_exit_or_not ${RET}
>>> + ((TEST_PASS++))
>>> + f_LogMsg "Cleanup working place"
>>> + ${RM_BIN} -rf ${WORK_PLACE}/* >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_exit_or_not ${RET}
>>> +
>>> + ((TEST_NO++))
>>> + f_LogRunMsg "[${TEST_NO}] Rename Test:"
>>> + f_LogMsg "[${TEST_NO}] Rename Test, CMD:${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN} -i 1 -n 2000 -w ${WORK_PLACE} -m"
>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN} -i 1 -n 2000 -w ${WORK_PLACE} -m >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_echo_status ${RET}| tee -a ${RUN_LOG_FILE}
>>> + f_exit_or_not ${RET}
>>> + ((TEST_PASS++))
>>> + f_LogMsg "Cleanup working place"
>>> + ${RM_BIN} -rf ${WORK_PLACE}/* >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_exit_or_not ${RET}
>>> +
>>> + ((TEST_NO++))
>>> + f_LogRunMsg "[${TEST_NO}] Read Test:"
>>> + f_LogMsg "[${TEST_NO}] Read Test, CMD:${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN} -i 1 -n 3000 -w ${WORK_PLACE} -r"
>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN} -i 1 -n 3000 -w ${WORK_PLACE} -r >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_echo_status ${RET}| tee -a ${RUN_LOG_FILE}
>>> + f_exit_or_not ${RET}
>>> + ((TEST_PASS++))
>>> + f_LogMsg "Cleanup working place"
>>> + ${RM_BIN} -rf ${WORK_PLACE}/* >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_exit_or_not ${RET}
>>> +
>>> + ((TEST_NO++))
>>> + f_LogRunMsg "[${TEST_NO}] Unlink Test:"
>>> + f_LogMsg "[${TEST_NO}] Unlink Test, CMD:${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN}"
>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN} -i 1 -n 100 -w ${WORK_PLACE} -u >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_echo_status ${RET}| tee -a ${RUN_LOG_FILE}
>>> + f_exit_or_not ${RET}
>>> + ((TEST_PASS++))
>>> + f_LogMsg "Cleanup working place"
>>> + ${RM_BIN} -rf ${WORK_PLACE}/* >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_exit_or_not ${RET}
>>> +
>>> + ((TEST_NO++))
>>> + f_LogRunMsg "[${TEST_NO}] Fillup Test:"
>>> + f_LogMsg "[${TEST_NO}] Fillup Test, CMD:${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN} -i 1 -n 10000 -w ${WORK_PLACE} -f"
>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN} -i 1 -n 10000 -w ${WORK_PLACE} -f >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_echo_status ${RET}| tee -a ${RUN_LOG_FILE}
>>> + f_exit_or_not ${RET}
>>> + ((TEST_PASS++))
>>> + f_LogMsg "Cleanup working place"
>>> + ${RM_BIN} -rf ${WORK_PLACE}/* >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_exit_or_not ${RET}
>>> +
>>> + ((TEST_NO++))
>>> + f_LogRunMsg "[${TEST_NO}] Stress Test:"
>>> + f_LogMsg "[${TEST_NO}] Stress Test, CMD:${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN} -i 10 -n 60000 -w ${WORK_PLACE} -s"
>>> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} ${MPI_BTL_ARG} ${MPI_BTL_IF_ARG} -np ${MPI_RANKS} --host ${MPI_HOSTS} ${MULTI_INDEXED_DIRS_TEST_BIN} -i 10 -n 60000 -w ${WORK_PLACE} -s >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_echo_status ${RET}| tee -a ${RUN_LOG_FILE}
>>> + f_exit_or_not ${RET}
>>> + ((TEST_PASS++))
>>> + f_LogMsg "Cleanup working place"
>>> + ${RM_BIN} -rf ${WORK_PLACE}/* >>${LOG_FILE} 2>&1
>>> + RET=$?
>>> + f_exit_or_not ${RET}
>>> +
>>> + f_LogRunMsg "[*] Umount volume ${LABELNAME} amongs nodes ${MPI_HOSTS}:"
>>> + f_remote_umount
>>> + RET=$?
>>> + f_echo_status ${RET}| tee -a ${RUN_LOG_FILE}
>>> + f_exit_or_not ${RET}
>>> +}
>>> +
>>> +f_cleanup()
>>> +{
>>> + :
>>> +}
>>> +
>>> +################################################################################
>>> +# Main Entry
>>> +################################################################################
>>> +
>>> +trap 'echo -ne "\n\n">>${RUN_LOG_FILE};echo "Interrupted by Ctrl+C,Cleanuping... "|tee -a ${RUN_LOG_FILE}; f_cleanup;exit 1' SIGINT
>>> +
>>> +f_setup $*
>>> +
>>> +START_TIME=${SECONDS}
>>> +f_LogRunMsg "=====================Multi-nodes indexed dirs tests start: `date`=====================\n"
>>> +f_LogMsg "=====================Multi-nodes indexed dirs tests start: `date`====================="
>>> +
>>> +for BLOCKSIZE in 512 1024 2048 4096
>>> +do
>>> + for CLUSTERSIZE in 4096 32768 1048576
>>> + do
>>> + f_LogRunMsg "<- Running test with ${BLOCKSIZE} bs and ${CLUSTERSIZE} cs ->\n"
>>> + f_LogMsg "<- Running test with ${BLOCKSIZE} bs and ${CLUSTERSIZE} cs ->"
>>> + f_runtest
>>> + done
>>> +done
>>> +f_cleanup
>>> +
>>> +END_TIME=${SECONDS}
>>> +f_LogRunMsg "=====================Multi-nodes indexed dirs tests end: `date`=====================\n"
>>> +f_LogMsg "=====================Multi-nodes indexed dirs tests end: `date`====================="
>>> +
>>> +f_LogRunMsg "Time elapsed(s): $((${END_TIME}-${START_TIME}))\n"
>>> +f_LogRunMsg "Tests total: ${TEST_NO}\n"
>>> +f_LogRunMsg "Tests passed: ${TEST_PASS}\n"
>>>
>>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://oss.oracle.com/pipermail/ocfs2-test-devel/attachments/20090225/51555c5c/attachment-0001.html
More information about the Ocfs2-test-devel
mailing list