[Ocfs2-test-devel] [PATCH 1/1] Ocfs2-test: Changes needed from openmpi-1.2.5 to 1.3.2
Marcos E. Matsunaga
Marcos.Matsunaga at oracle.com
Tue Dec 29 14:21:54 PST 2009
Tristan.
One comment.
Instead of making SLOTS=4, you could add to the end of f_getoptions the
following:
echo $MPI_HOSTS|sed -e 's/,/\n/g' >/tmp/$$
SLOTS=`cat /tmp/$$ |wc -l`
rm -f /tmp/$$
That way, it will always format the partition with the number of nodes
specified.
Also, SLOTS is defined, but not used anywhere. You should make the
MKFS_BIN line to include "-N ${SLOTS}" instead of "-N 2".
One thing that I found interesting is that it works fine on x86_64, but
on i686, it has the same behavior that I reported you before. It stays
in this loop:
14:19:48.575946 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
{fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
{fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
{fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000009>
14:19:48.576051 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
{fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
{fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
{fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000009>
14:19:48.576156 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
{fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
{fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
{fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000009>
14:19:48.576262 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
{fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
{fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
{fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000009>
14:19:48.576369 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
{fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
{fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
{fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000009>
14:19:48.576498 poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN},
{fd=6, events=POLLIN}, {fd=7, events=POLLIN}, {fd=8, events=POLLIN},
{fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=11, events=POLLIN},
{fd=12, events=POLLIN}], 9, 0) = 0 (Timeout) <0.000008>
I still didn't have a chance to test it on ia64 and ppc as I'm waiting
for other tests to complete before I test this patch.
Regards,
Marcos Eduardo Matsunaga
Oracle USA
Linux Engineering
“The statements and opinions expressed here are my own and do not
necessarily represent those of Oracle Corporation.”
On 12/21/2009 12:44 AM, Tristan Ye wrote:
> There are still some corners where changes needed for latest 1.3.2
> still untouched there, this patch is going to correct them accordingly.
>
> Marcos, will you please help to verify if it could solve your issues
> encountered in xattr tests before giving a SOB on this patch.
>
> Signed-off-by: Tristan Ye <tristan.ye at oracle.com>
> ---
> programs/dx_dirs_tests/multi_index_dir_run.sh | 4 +-
> .../multi_inode_alloc_perf.sh | 6 +-
> programs/reflink_tests/multi_reflink_test_run.sh | 4 +-
> programs/xattr_tests/xattr-multi-run.sh | 67 ++++++--------------
> 4 files changed, 26 insertions(+), 55 deletions(-)
>
> diff --git a/programs/dx_dirs_tests/multi_index_dir_run.sh b/programs/dx_dirs_tests/multi_index_dir_run.sh
> index 735fc79..3a3624c 100755
> --- a/programs/dx_dirs_tests/multi_index_dir_run.sh
> +++ b/programs/dx_dirs_tests/multi_index_dir_run.sh
> @@ -63,7 +63,7 @@ DEFAULT_RANKS=4
> MPI_RANKS=
> MPI_HOSTS=
> MPI_ACCESS_METHOD="ssh"
> -MPI_PLS_AGENT_ARG="-mca pls_rsh_agent ssh:rsh"
> +MPI_PLS_AGENT_ARG="-mca plm_rsh_agent ssh:rsh"
> MPI_BTL_ARG="-mca btl tcp,self"
> MPI_BTL_IF_ARG=
>
> @@ -123,7 +123,7 @@ function f_setup()
> f_getoptions $*
>
> if [ "$MPI_ACCESS_METHOD" = "rsh" ];then
> - MPI_PLS_AGENT_ARG="-mca pls_rsh_agent rsh:ssh"
> + MPI_PLS_AGENT_ARG="-mca plm_rsh_agent rsh:ssh"
> fi
>
> if [ -z "${MOUNT_POINT}" ];then
> diff --git a/programs/inode_alloc_perf_tests/multi_inode_alloc_perf.sh b/programs/inode_alloc_perf_tests/multi_inode_alloc_perf.sh
> index e419961..a815ef0 100755
> --- a/programs/inode_alloc_perf_tests/multi_inode_alloc_perf.sh
> +++ b/programs/inode_alloc_perf_tests/multi_inode_alloc_perf.sh
> @@ -88,7 +88,7 @@ ORIG_COMMITID=
> declare -i MPI_RANKS
> MPI_HOSTS=
> MPI_ACCESS_METHOD="ssh"
> -MPI_PLS_AGENT_ARG="-mca pls_rsh_agent ssh:rsh"
> +MPI_PLS_AGENT_ARG="-mca plm_rsh_agent ssh:rsh"
>
> set -o pipefail
>
> @@ -196,7 +196,7 @@ function f_check()
> f_getoptions $*
>
> if [ "$MPI_ACCESS_METHOD" = "rsh" ];then
> - MPI_PLS_AGENT_ARG="-mca pls_rsh_agent rsh:ssh"
> + MPI_PLS_AGENT_ARG="-mca plm_rsh_agent rsh:ssh"
> fi
>
> if [ -z "${MOUNT_POINT}" ];then
> @@ -314,7 +314,7 @@ f_run_test_one_time()
> f_exit_or_not ${RET}
>
> f_LogRunMsg "<Iteration ${1}>Run inode alloc perf tests among nodes ${MPI_HOSTS}:"
> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 --host ${MPI_HOSTS} ${LOCAL_TEST_RUNNER} -l ${LOCAL_LOG_DIR} -b ${LABELNAME} -t ${KERNEL_TARBALL} -k ${KERNEL_PATH} -p ${PATCH_PATH} -s ${ISCSI_SERVER} ${MOUNT_POINT} >>${LOG_FILE} 2>&1
> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self --host ${MPI_HOSTS} ${LOCAL_TEST_RUNNER} -l ${LOCAL_LOG_DIR} -b ${LABELNAME} -t ${KERNEL_TARBALL} -k ${KERNEL_PATH} -p ${PATCH_PATH} -s ${ISCSI_SERVER} ${MOUNT_POINT} >>${LOG_FILE} 2>&1
> RET=$?
> f_echo_status ${RET} | tee -a ${RUN_LOG_FILE}
> f_exit_or_not ${RET}
> diff --git a/programs/reflink_tests/multi_reflink_test_run.sh b/programs/reflink_tests/multi_reflink_test_run.sh
> index f389172..13b72e0 100755
> --- a/programs/reflink_tests/multi_reflink_test_run.sh
> +++ b/programs/reflink_tests/multi_reflink_test_run.sh
> @@ -74,7 +74,7 @@ DEFAULT_RANKS=4
> MPI_RANKS=
> MPI_HOSTS=
> MPI_ACCESS_METHOD="ssh"
> -MPI_PLS_AGENT_ARG="-mca pls_rsh_agent ssh:rsh"
> +MPI_PLS_AGENT_ARG="-mca plm_rsh_agent ssh:rsh"
> MPI_BTL_ARG="-mca btl tcp,self"
> MPI_BTL_IF_ARG=
>
> @@ -135,7 +135,7 @@ function f_setup()
> f_getoptions $*
>
> if [ "$MPI_ACCESS_METHOD" = "rsh" ];then
> - MPI_PLS_AGENT_ARG="-mca pls_rsh_agent rsh:ssh"
> + MPI_PLS_AGENT_ARG="-mca plm_rsh_agent rsh:ssh"
> fi
>
> if [ -z "${MOUNT_POINT}" ];then
> diff --git a/programs/xattr_tests/xattr-multi-run.sh b/programs/xattr_tests/xattr-multi-run.sh
> index cb6984f..701d5fb 100755
> --- a/programs/xattr_tests/xattr-multi-run.sh
> +++ b/programs/xattr_tests/xattr-multi-run.sh
> @@ -71,18 +71,17 @@ OCFS2_DEVICE=
> BLOCKSIZE=
> CLUSTERSIZE=
> BLOCKNUMS=
> +SLOTS=4
>
> WORKPLACE=
>
> TMP_DIR=/tmp
> -DEFAULT_HOSTFILE=".openmpi_hostfile"
> DEFAULT_RANKS=4
>
> declare -i MPI_RANKS
> MPI_HOSTS=
> -MPI_HOSTFILE=
> MPI_ACCESS_METHOD="ssh"
> -MPI_PLS_AGENT_ARG="-mca pls_rsh_agent ssh:rsh"
> +MPI_PLS_AGENT_ARG="-mca plm_rsh_agent ssh:rsh"
>
> TEST_NO=0
> TEST_PASS=0
> @@ -176,31 +175,6 @@ f_getoptions()
>
> }
>
> -f_create_hostfile()
> -{
> - MPI_HOSTFILE="${TMP_DIR}/${DEFAULT_HOSTFILE}"
> - TMP_FILE="${TMP_DIR}/.tmp_openmpi_hostfile_$$"
> -
> - echo ${MPI_HOSTS}|sed -e 's/,/\n/g'>$TMP_FILE
> -
> - if [ -f "$MPI_HOSTFILE" ];then
> - ${RM} -rf ${MPI_HOSTFILE}
> - fi
> -
> - while read line
> - do
> - if [ -z $line ];then
> - continue
> - fi
> -
> - echo "$line">>$MPI_HOSTFILE
> -
> - done<$TMP_FILE
> -
> - ${RM} -rf $TMP_FILE
> -}
> -
> -
> f_setup()
> {
> if [ "${UID}" = "0" ];then
> @@ -211,7 +185,7 @@ f_setup()
> f_getoptions $*
>
> if [ "$MPI_ACCESS_METHOD" = "rsh" ];then
> - MPI_PLS_AGENT_ARG="-mca pls_rsh_agent rsh:ssh"
> + MPI_PLS_AGENT_ARG="-mca plm_rsh_agent rsh:ssh"
> REMOTE_SH_BIN=${RSH_BIN}
> fi
>
> @@ -244,11 +218,8 @@ f_setup()
>
> if [ -z "$MPI_HOSTS" ];then
> f_usage
> - else
> - f_create_hostfile
> fi
>
> -
> ${CHMOD_BIN} -R 777 ${MOUNT_POINT}
>
> ${CHOWN_BIN} -R ${USERNAME}:${GROUPNAME} ${MOUNT_POINT}
> @@ -303,10 +274,10 @@ f_runtest()
> do
> for filetype in normal directory symlink
> do
> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 20 -n ${namespace} -t ${filetype} -l 50 -s 200 ${WORKPLACE}">>${LOG_FILE}
> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 20 -n ${namespace} -t ${filetype} -l 50 -s 200 ${WORKPLACE}">>${LOG_FILE}
> echo "********${namespace} mode on ${filetype}********">>${LOG_FILE}
>
> - ${SUDO} ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 20 -n ${namespace} -t ${filetype} -l 50 -s 200 ${WORKPLACE}>>${LOG_FILE} 2>&1
> + ${SUDO} ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 20 -n ${namespace} -t ${filetype} -l 50 -s 200 ${WORKPLACE}>>${LOG_FILE} 2>&1
> rc=$?
> if [ "$rc" != "0" ];then
> if [ "$namespace" == "user" -a "$filetype" == "symlink" ]; then
> @@ -346,8 +317,8 @@ f_runtest()
> echo >>${LOG_FILE}
> echo "==========================================================">>${LOG_FILE}
> for((i=0;i<4;i++));do
> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10 -n user -t normal -l 50 -s 100 ${WORKPLACE}">>${LOG_FILE}
> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10 -n user -t normal -l 50 -s 100 ${WORKPLACE}>>${LOG_FILE} 2>&1
> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10 -n user -t normal -l 50 -s 100 ${WORKPLACE}">>${LOG_FILE}
> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10 -n user -t normal -l 50 -s 100 ${WORKPLACE}>>${LOG_FILE} 2>&1
> rc=$?
> if [ ! "$rc" == "0" ];then
> echo_failure |tee -a ${RUN_LOG_FILE}
> @@ -370,8 +341,8 @@ f_runtest()
> echo -ne "[${TEST_NO}] Check Max Multinode Xattr EA_Name_Length:">> ${LOG_FILE}
> echo >>${LOG_FILE}
> echo "==========================================================">>${LOG_FILE}
> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 4 -n user -t normal -l 255 -s 300 ${WORKPLACE}">>${LOG_FILE}
> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 4 -n user -t normal -l 255 -s 300 ${WORKPLACE}>>${LOG_FILE} 2>&1
> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 4 -n user -t normal -l 255 -s 300 ${WORKPLACE}">>${LOG_FILE}
> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 4 -n user -t normal -l 255 -s 300 ${WORKPLACE}>>${LOG_FILE} 2>&1
> RET=$?
> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
> exit_or_not ${RET}
> @@ -386,8 +357,8 @@ f_runtest()
> echo -ne "[${TEST_NO}] Check Max Multinode Xattr EA_Size:">> ${LOG_FILE}
> echo >>${LOG_FILE}
> echo "==========================================================">>${LOG_FILE}
> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1 -n user -t normal -l 50 -s 65536 ${WORKPLACE}">>${LOG_FILE}
> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1 -n user -t normal -l 50 -s 65536 ${WORKPLACE}>>${LOG_FILE} 2>&1
> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1 -n user -t normal -l 50 -s 65536 ${WORKPLACE}">>${LOG_FILE}
> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1 -n user -t normal -l 50 -s 65536 ${WORKPLACE}>>${LOG_FILE} 2>&1
> RET=$?
> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
> exit_or_not ${RET}
> @@ -402,8 +373,8 @@ f_runtest()
> echo -ne "[${TEST_NO}] Check Huge Multinode Xattr EA_Entry_Nums:">> ${LOG_FILE}
> echo >>${LOG_FILE}
> echo "==========================================================">>${LOG_FILE}
> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10000 -n user -t normal -l 100 -s 200 ${WORKPLACE}">>${LOG_FILE}
> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10000 -n user -t normal -l 100 -s 200 ${WORKPLACE}>>${LOG_FILE} 2>&1
> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10000 -n user -t normal -l 100 -s 200 ${WORKPLACE}">>${LOG_FILE}
> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 10000 -n user -t normal -l 100 -s 200 ${WORKPLACE}>>${LOG_FILE} 2>&1
> RET=$?
> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
> exit_or_not ${RET}
> @@ -418,8 +389,8 @@ f_runtest()
> echo -ne "[${TEST_NO}] Check All Max Multinode Xattr Arguments Together:">> ${LOG_FILE}
> echo >>${LOG_FILE}
> echo "==========================================================">>${LOG_FILE}
> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 65536 ${WORKPLACE}">>${LOG_FILE}
> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 65536 ${WORKPLACE}>>${LOG_FILE} 2>&1
> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 65536 ${WORKPLACE}">>${LOG_FILE}
> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 65536 ${WORKPLACE}>>${LOG_FILE} 2>&1
> RET=$?
> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
> exit_or_not ${RET}
> @@ -434,8 +405,8 @@ f_runtest()
> echo -ne "[${TEST_NO}] Launch Concurrent Adding Test:">> ${LOG_FILE}
> echo >>${LOG_FILE}
> echo "==========================================================">>${LOG_FILE}
> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 5000 -o -r -k ${WORKPLACE}">>${LOG_FILE}
> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 5000 -o -r -k ${WORKPLACE}>>${LOG_FILE} 2>&1
> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 5000 -o -r -k ${WORKPLACE}">>${LOG_FILE}
> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 1000 -n user -t normal -l 255 -s 5000 -o -r -k ${WORKPLACE}>>${LOG_FILE} 2>&1
> RET=$?
> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
> exit_or_not ${RET}
> @@ -450,8 +421,8 @@ f_runtest()
> echo -ne "[${TEST_NO}] Launch MultiNode Xattr Stress Test:">> ${LOG_FILE}
> echo >>${LOG_FILE}
> echo "==========================================================">>${LOG_FILE}
> - echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 2000 -n user -t normal -l 255 -s 5000 -r -k ${WORKPLACE}">>${LOG_FILE}
> - ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -mca btl_tcp_if_include eth0 -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 2000 -n user -t normal -l 255 -s 5000 -r -k ${WORKPLACE}>>${LOG_FILE} 2>&1
> + echo -e "Testing Binary:\t\t${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 2000 -n user -t normal -l 255 -s 5000 -r -k ${WORKPLACE}">>${LOG_FILE}
> + ${MPIRUN} ${MPI_PLS_AGENT_ARG} -mca btl tcp,self -np ${MPI_RANKS} --host ${MPI_HOSTS} ${XATTR_TEST_BIN} -i 1 -x 2000 -n user -t normal -l 255 -s 5000 -r -k ${WORKPLACE}>>${LOG_FILE} 2>&1
> RET=$?
> echo_status ${RET} |tee -a ${RUN_LOG_FILE}
> exit_or_not ${RET}
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://oss.oracle.com/pipermail/ocfs2-test-devel/attachments/20091229/6d23ed03/attachment-0001.html
More information about the Ocfs2-test-devel
mailing list