[Ocfs2-test-devel] [PATCH 2/2] Ocfs2-tests: Add acl_tests.sh v2 for ocfs2.
Tristan Ye
tristan.ye at oracle.com
Fri Dec 19 00:47:04 PST 2008
>From v1 to v2,changes were as below:
1). Apply Marcos's comments to enable none-root user execution.
2). Change the way tests executed to a more thorough one. previously we only
allow the execution with 3(small, medium and large) modes, now we wish to
force execution with all bs and cs combinations to get acl&xattr more carefully
examined.
Signed-off-by: Tristan Ye <tristan.ye at oracle.com>
---
programs/acl_tests/acl_tests.sh | 824 +++++++++++++++++++++++++++++++++++++++
1 files changed, 824 insertions(+), 0 deletions(-)
create mode 100755 programs/acl_tests/acl_tests.sh
diff --git a/programs/acl_tests/acl_tests.sh b/programs/acl_tests/acl_tests.sh
new file mode 100755
index 0000000..3c05f8f
--- /dev/null
+++ b/programs/acl_tests/acl_tests.sh
@@ -0,0 +1,824 @@
+#!/bin/bash
+#
+# Copyright (C) 2008 Oracle. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public
+# License, version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public
+# License along with this program; if not, write to the
+# Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 021110-1307, USA.
+#
+#
+# Description: This script will perform a sanity check on acls with a series
+# of POSIX acls tools used for a acl-supported fs.
+#
+# following tools needed:
+# # /usr/bin/setfacl,/usr/bin/getfacl
+# /usr/bin/chacl
+#
+# Author: Tristan Ye (tristan.ye at oracle.com)
+#
+
+################################################################################
+# Global Variables
+################################################################################
+. `dirname ${0}`/config.sh
+
+MKFS_BIN=
+MOUNT_BIN="`which sudo` -u root `which mount`"
+UMOUNT_BIN="`which sudo` -u root `which umount`"
+TEE_BIN=`which tee`
+RM_BIN=`which rm`
+MKDIR_BIN=`which mkdir`
+TOUCH_BIN=`which touch`
+DIFF_BIN=`which diff`
+MOVE_BIN=`which mv`
+CP_BIN=`which cp`
+SED_BIN=`which sed`
+CUT_BIN=`which cut`
+
+USERNAME=`id -un`
+GROUPNAME=`id -gn`
+
+SUDO="`which sudo` -u root"
+
+FS_TYPE=ocfs2
+DEVICE=
+MOUNT_POINT=
+
+GROUPADD_BIN="`which sudo` -u root /usr/sbin/groupadd"
+GROUPDEL_BIN="`which sudo` -u root /usr/sbin/groupdel"
+USERADD_BIN="`which sudo` -u root /usr/sbin/useradd"
+USERDEL_BIN="`which sudo` -u root /usr/sbin/userdel"
+USERMOD_BIN="`which sudo` -u root /usr/sbin/usermod"
+CHOWN_BIN=`which chown`
+CHMOD_BIN=`which chmod`
+SUDO_BIN=`which sudo`
+
+SETACL_BIN="`which sudo` -u root `which setfacl`"
+GETACL_BIN="`which getfacl` --absolute-names"
+CHACL_BIN="`which sudo` -u root `which chacl`"
+
+BLOCKSIZE=
+CLUSTERSIZE=
+SLOTS=4
+LABELNAME=ocfs2-acl-tests
+
+DEFAULT_LOG_DIR=${O2TDIR}/log
+LOG_DIR=
+RUN_LOG_FILE=
+LOG_FILE=
+MKFSLOG=
+MOUNTLOG=
+
+
+TEST_NO=0
+TEST_PASS=0
+
+set -o pipefail
+
+BOOTUP=color
+RES_COL=80
+MOVE_TO_COL="echo -en \\033[${RES_COL}G"
+SETCOLOR_SUCCESS="echo -en \\033[1;32m"
+SETCOLOR_FAILURE="echo -en \\033[1;31m"
+SETCOLOR_WARNING="echo -en \\033[1;33m"
+SETCOLOR_NORMAL="echo -en \\033[0;39m"
+################################################################################
+# Utility Functions
+################################################################################
+
+function f_echo_success()
+{
+ [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
+ echo -n "["
+ [ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS
+ echo -n $" PASS "
+ [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
+ echo -n "]"
+
+ return 0
+}
+
+function f_echo_failure()
+{
+ [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
+ echo -n "["
+ [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
+ echo -n $"FAILED"
+ [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
+ echo -n "]"
+
+ return 1
+}
+
+function f_echo_status()
+{
+ if [ "${1}" == "0" ];then
+ f_echo_success
+ echo
+ else
+ f_echo_failure
+ echo
+ exit 1
+ fi
+}
+
+function f_exit_or_not()
+{
+ if [ "${1}" != "0" ];then
+ exit 1;
+ fi
+}
+
+function f_usage()
+{
+ echo "usage: `basename ${0}` <-o logdir> <-d device> [-t fs_type] <mountpoint path>"
+ echo " -o output directory for the logs"
+ echo " -d block device name used for ocfs2 volume"
+ echo " -t fs_type,currently support ocfs2 and ext3"
+ echo " <mountpoint path> path of mountpoint where the ocfs2 volume will be mounted on."
+ exit 1;
+}
+
+function f_getoptions()
+{
+ if [ $# -eq 0 ]; then
+ f_usage;
+ exit 1
+ fi
+
+ while getopts "o:hd:t:" options; do
+ case $options in
+ o ) LOG_DIR="$OPTARG";;
+ d ) DEVICE="$OPTARG";;
+ t ) FS_TYPE="$OPTARG";;
+ h ) f_usage;;
+ * ) f_usage;;
+ esac
+ done
+
+ shift $(($OPTIND -1))
+ MOUNT_POINT=${1}
+}
+
+function f_check()
+{
+ f_getoptions $*
+
+ if [ -z "${MOUNT_POINT}" ];then
+ f_usage
+ else
+ if [ ! -d ${MOUNT_POINT} ]; then
+ echo "Mount point ${MOUNT_POINT} does not exist."
+ exit 1
+ else
+ #To assure that mount point will not end with a trailing '/'
+ if [ "`dirname ${MOUNT_POINT}`" = "/" ]; then
+ MOUNT_POINT="`dirname ${MOUNT_POINT}``basename ${MOUNT_POINT}`"
+ else
+ MOUNT_POINT="`dirname ${MOUNT_POINT}`/`basename ${MOUNT_POINT}`"
+ fi
+ fi
+ fi
+
+ LOG_DIR=${LOG_DIR:-$DEFAULT_LOG}
+
+ ${MKDIR_BIN} -p ${LOG_DIR} || exit 1
+
+ RUN_LOG_FILE="`dirname ${LOG_DIR}`/`basename ${LOG_DIR}`/`date +%F-%H-%M-%S`-acl-tests-run.log"
+ LOG_FILE="`dirname ${LOG_DIR}`/`basename ${LOG_DIR}`/`date +%F-%H-%M-%S`-acl-tests.log"
+ MKFSLOG="`dirname ${LOG_DIR}`/`basename ${LOG_DIR}`/$$_mkfs.log"
+ MOUNTLOG="`dirname ${LOG_DIR}`/`basename ${LOG_DIR}`/$$_mount.log"
+
+ if [ "${FS_TYPE}" = "ocfs2" ];then
+ MKFS_BIN="`which sudo` -u root `which mkfs.ocfs2`"
+ else
+ MKFS_BIN="`which sudo` -u root `which mkfs.ext3`"
+ fi
+}
+
+function f_LogRunMsg()
+{
+ echo -ne "$@"| ${TEE_BIN} -a ${RUN_LOG_FILE}
+}
+
+function f_LogMsg()
+{
+ echo "$(date +%Y/%m/%d,%H:%M:%S) $@" >>${LOG_FILE}
+}
+
+function f_mkfs_and_mount()
+{
+ f_LogMsg "Mkfs and mount volume before test"
+ if [ "${FS_TYPE}" = "ocfs2" ];then
+ f_LogRunMsg "Mkfsing target volume as ${FS_TYPE} with -b ${BLOCKSIZE} -C ${CLUSTERSIZE}:"
+ echo "y"| ${MKFS_BIN} --fs-features=xattr -b ${BLOCKSIZE} -C ${CLUSTERSIZE} -L ${LABELNAME} -N ${SLOTS} ${DEVICE} >>${MKFSLOG} 2>&1
+ RET=$?
+ f_echo_status ${RET} |tee -a ${RUN_LOG_FILE}
+ f_exit_or_not ${RET}
+
+ f_LogRunMsg "Mounting ${DEVICE} to ${MOUNT_POINT}:"
+ ${MOUNT_BIN} -t ${FS_TYPE} -o acl ${DEVICE} ${MOUNT_POINT} >>${MOUNTLOG} 2>&1
+ RET=$?
+ f_echo_status ${RET} |tee -a ${RUN_LOG_FILE}
+ f_exit_or_not ${RET}
+ else
+ f_LogRunMsg "Mkfsing target volume as ${FS_TYPE} with -b ${BLOCKSIZE}:"
+ ${MKFS_BIN} -b ${BLOCKSIZE} -L ${LABELNAME} ${DEVICE} -F >>${MKFSLOG} 2>&1
+ RET=$?
+ f_echo_status ${RET}|tee -a ${RUN_LOG_FILE}
+ f_exit_or_not ${RET}
+
+ f_LogRunMsg "Mounting ${DEVICE} to ${MOUNT_POINT}:"
+ ${MOUNT_BIN} -t ${FS_TYPE} -o acl ${DEVICE} ${MOUNT_POINT} >>${MOUNTLOG} 2>&1
+ RET=$?
+ f_echo_status ${RET} | tee -a ${RUN_LOG_FILE}
+ f_exit_or_not ${RET}
+ fi
+
+ f_LogMsg "Chmod ${MOUNT_POINT} as 777"
+ ${SUDO} ${CHMOD_BIN} -R 777 ${MOUNT_POINT} >>${LOG_FILE} 2>&1
+ ${SUDO} ${CHOWN_BIN} -R ${USERNAME}:${GROUPNAME} ${MOUNT_POINT} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+}
+
+function f_runtest()
+{
+ local WORKPLACE=${MOUNT_POINT}/acls-tests
+ local USERNAMEPREFIX=acls-test-user
+ local USERNAME=
+ local GROUPNAMEPREFIX=acls-tet-group
+ local GROUPNAME=
+ local TESTFILE=
+ local TESTDIR=
+ USERNUM=
+ GROUPNUM=
+
+ ${MKDIR_BIN} -p ${WORKPLACE}
+ f_exit_or_not $?
+
+ ((TEST_NO++))
+ TESTFILE=${WORKPLACE}/acls-generic-test-file
+ TESTDIR=${WORKPLACE}/acls-generic-test-dir
+ f_LogRunMsg "[${TEST_NO}] Generic ACLs Test:"
+ f_LogMsg "Test ${TEST_NO}: Generic ACLs Test."
+
+ STARTID=500
+
+ f_LogMsg "Touch testing file."
+ ${TOUCH_BIN} ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ ${MKDIR_BIN} ${TESTDIR} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ f_LogMsg "Add ACLs for file and dir."
+
+ ${SETACL_BIN} -m u:${STARTID}:r-x ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ ${SETACL_BIN} -m u:${STARTID}:rwx ${TESTDIR} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ ${GETACL_BIN} --numeric --omit ${TESTFILE} |grep -q ${STARTID} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ ${GETACL_BIN} --numeric --omit ${TESTDIR} |grep -q ${STARTID} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ f_LogMsg "Remove testing files."
+ ${RM_BIN} -rf ${TESTFILE} ${TESTDIR}
+ f_exit_or_not $?
+
+ RET=$?
+ f_echo_status ${RET} |tee -a ${RUN_LOG_FILE}
+ ((TEST_PASS++))
+
+ ((TEST_NO++))
+ f_LogRunMsg "[${TEST_NO}] Default ACLs Test:"
+ f_LogMsg "Test ${TEST_NO}: Default ACLs Test."
+ #deep depth dirent operations
+
+ f_LogMsg "Test Default ACLs with considerable depth."
+ DEPTH=100
+ ROOTDIR=${WORKPLACE}/acls-default-test-dir
+ f_LogMsg "Mkdir rootdir ${ROOTDIR}."
+ ${MKDIR_BIN} ${ROOTDIR} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ f_LogMsg "Add default ACLs to root dir."
+ DEFAULT_ACL_NUM=1000
+ STARTID=500
+ for i in $(seq ${DEFAULT_ACL_NUM});do
+ ${SETACL_BIN} -d -m u:$((${STARTID}+${i})):rwx ${ROOTDIR} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ ROOTDIR_DEFAULT_ACL=/tmp/rootdir_default_acl.$$
+ SONDIR_DEFAULT_ACL=/tmp/sondir_default_acl.$$
+
+ INHERIT_ACL_TEMPLATE=/tmp/inherit_acl_template.$$
+ INHERIT_ACL=/tmp/inherit_acl.$$
+
+ ${GETACL_BIN} -d --omit ${ROOTDIR} > ${ROOTDIR_DEFAULT_ACL} 2>>${LOG_FILE}
+ f_exit_or_not $?
+
+ TESTDIR=${ROOTDIR}
+
+ f_LogMsg "Create dir tree to test default acls."
+ for i in $(seq ${DEPTH});do
+ TESTFILE=${TESTDIR}/default-file-level-${i}
+ TESTDIR=${TESTDIR}/default-dir-level-${i}
+ ${MKDIR_BIN} ${TESTDIR} >>${LOG_FILE} 2>&1
+ ${TOUCH_BIN} ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ ${GETACL_BIN} -d --omit ${TESTDIR} > ${SONDIR_DEFAULT_ACL} 2>>${LOG_FILE}
+ f_exit_or_not $?
+
+ ${DIFF_BIN} ${ROOTDIR_DEFAULT_ACL} ${SONDIR_DEFAULT_ACL} || {
+ f_LogMsg "Level ${i} dir ${TESTDIR}'s default ACLs did not match root's."
+ RET=1
+ f_echo_status ${RET}|tee -a ${RUN_LOG_FILE}
+ return -1
+ }
+
+ if [ ! -f ${INHERIT_ACL_TEMPLATE} ];then
+ ${GETACL_BIN} --omit ${TESTFILE} >${INHERIT_ACL_TEMPLATE} 2>>${LOG_FILE}
+ f_exit_or_not $?
+ else
+ ${GETACL_BIN} --omit ${TESTFILE} >${INHERIT_ACL} 2>>${LOG_FILE}
+ f_exit_or_not $?
+ ${DIFF_BIN} ${INHERIT_ACL_TEMPLATE} ${INHERIT_ACL} || {
+ f_LogMsg "Level ${i} file ${TESTFILE}'s inherited ACLs did not match other's."
+ RET=1
+ f_echo_status ${RET}|tee -a ${RUN_LOG_FILE}
+ return -1
+ }
+ fi
+
+ done
+
+ f_LogMsg "Remove temporary comparing files."
+ ${RM_BIN} -rf ${ROOTDIR_DEFAULT_ACL}
+ ${RM_BIN} -rf ${SONDIR_DEFAULT_ACL}
+
+ ${RM_BIN} -rf ${INHERIT_ACL_TEMPLATE}
+ ${RM_BIN} -rf ${INHERIT_ACL}
+ f_exit_or_not $?
+
+ f_LogMsg "Remove testing files."
+ ${RM_BIN} -rf ${ROOTDIR}
+
+ RET=$?
+ f_echo_status ${RET} |tee -a ${RUN_LOG_FILE}
+ ((TEST_PASS++))
+
+
+ ((TEST_NO++))
+ #cp,mv,ls
+ f_LogRunMsg "[${TEST_NO}] ACLs Test With File Utilities:"
+ f_LogMsg "Test ${TEST_NO}: ACLs Test With File Utilities."
+
+ TESTFILE=${WORKPLACE}/acls-utils-test-file
+ TESTFILE_MOVED=${WORKPLACE}/acls-utils-test-file-moved
+ TESTFILE_COPIED=${WORKPLACE}/acls-utils-test-file-copied
+
+ ORIG_ACL=/tmp/utils-test-orig-acl.$$
+ MOVED_ACL=/tmp/utils-test-moved-acl.$$
+ COPIED_ACL=/tmp/utils-test-copied-acl.$$
+
+ USERNUM=1000
+ STARTID=500
+
+ f_LogMsg "Touch original files with ACLs attached."
+
+ ${TOUCH_BIN} ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ for i in $(seq ${USERNUM});do
+ ${SETACL_BIN} -m u:$((${STARTID}+${i})):r-x ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ f_LogMsg "Test ls cmd."
+ ls -l ${TESTFILE} | awk '{print $1}'| grep -q '+' || {
+ f_LogMsg "ls utility has not been updated for handling acl."
+ RET=1
+ f_echo_status ${RET}|tee -a ${RUN_LOG_FILE}
+ return -1
+ }
+
+ ${GETACL_BIN} --omit ${TESTFILE} >${ORIG_ACL} 2>>${LOG_FILE}
+ f_exit_or_not $?
+
+ f_LogMsg "Test cp cmd."
+ ${CP_BIN} -p ${TESTFILE} ${TESTFILE_COPIED} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ ${GETACL_BIN} --omit ${TESTFILE_COPIED} >${COPIED_ACL} 2>>${LOG_FILE}
+ f_exit_or_not $?
+
+ ${DIFF_BIN} ${ORIG_ACL} ${COPIED_ACL} || {
+ f_LogMsg "cp utility has not been updated for handling acl."
+ RET=1
+ f_echo_status ${RET}|tee -a ${RUN_LOG_FILE}
+ return -1
+ }
+
+ f_LogMsg "Test mv cmd."
+ ${MOVE_BIN} ${TESTFILE} ${TESTFILE_MOVED} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ ${GETACL_BIN} --omit ${TESTFILE_MOVED} >${MOVED_ACL} 2>>${LOG_FILE}
+ f_exit_or_not $?
+
+ ${DIFF_BIN} ${ORIG_ACL} ${MOVED_ACL} || {
+ f_LogMsg "mv utility has not been updated for handling acl."
+ RET=1
+ f_echo_status ${RET}|tee -a ${RUN_LOG_FILE}
+ return -1
+ }
+
+ f_LogMsg "Remove temporary comparing files."
+ ${RM_BIN} -rf ${ORIG_ACL} ${MOVED_ACL} ${COPIED_ACL}
+ f_exit_or_not $?
+
+ f_LogMsg "Remove testing files."
+ ${RM_BIN} -rf ${TESTFILE_COPIED} ${TESTFILE_MOVED}
+ f_exit_or_not $?
+
+ RET=$?
+ f_echo_status ${RET} |tee -a ${RUN_LOG_FILE}
+ ((TEST_PASS++))
+
+ ((TEST_NO++))
+ f_LogRunMsg "[${TEST_NO}] Copying ACLs Test:"
+ f_LogMsg "Test ${TEST_NO}: Copying ACLs Test."
+
+ TESTFILE=${WORKPLACE}/copying-src-acl-test-file
+ USERNUM=100
+ STARTID=500
+ FILENUM=1000
+ DESTFILE_PREFIX=${WORKPLACE}/copying-dest-acl-test-file
+
+ SRC_ACL=/tmp/copying-test-src-acl.$$
+ DEST_ACL=/tmp/copying-test-desct-acl.$$
+
+ f_LogMsg "Touch source copying file."
+ ${TOUCH_BIN} ${TESTFILE}
+ f_exit_or_not $?
+
+ for i in $(seq ${USERNUM});do
+ ${SETACL_BIN} -m u:$((${STARTID}+${i})):r-x ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ ${GETACL_BIN} --omit ${TESTFILE}>${SRC_ACL} 2>>${LOG_FILE}
+ f_exit_or_not $?
+
+ for i in $(seq ${FILENUM});do
+ ${TOUCH_BIN} ${DESTFILE_PREFIX}-${i}
+ f_exit_or_not $?
+ done
+
+ f_LogMsg "Copying ACLs to destination files."
+ ${GETACL_BIN} --omit ${TESTFILE} 2>>${LOG_FILE}| ${SETACL_BIN} --set-file=- ${DESTFILE_PREFIX}* >>${LOG_FILE} 2>&1 || {
+ f_LogMsg "Copying ACLs to dest file failed."
+ RET=1
+ f_echo_status ${RET}|tee -a ${RUN_LOG_FILE}
+ return -1
+ }
+
+ for i in $(seq ${FILENUM});do
+ ${GETACL_BIN} --omit ${DESTFILE_PREFIX}-${i} >${DEST_ACL} 2>>${LOG_FILE}
+ f_exit_or_not $?
+
+ ${DIFF_BIN} ${SRC_ACL} ${DEST_ACL} || {
+ f_LogMsg "Dest ACL from copied file did not match original one."
+ RET=1
+ f_echo_status ${RET} | tee -a ${RUN_LOG_FILE}
+ return -1
+ }
+ done
+
+ f_LogMsg "Remove temporary and testing files"
+ ${RM_BIN} -rf ${TESTFILE}
+ f_exit_or_not $?
+
+ for i in $(seq ${FILENUM});do
+ ${RM_BIN} -rf ${DESTFILE_PREFIX}-${i}
+ f_exit_or_not $?
+ done
+
+ ${RM_BIN} -rf ${SRC_ACL} ${DEST_ACL}
+ f_exit_or_not $?
+
+ RET=$?
+ f_echo_status ${RET} |tee -a ${RUN_LOG_FILE}
+ ((TEST_PASS++))
+
+ ((TEST_NO++))
+ f_LogRunMsg "[${TEST_NO}] Archive and Restore ACLs Test:"
+ f_LogMsg "Test ${TEST_NO}: Archive and Restore ACLs Test."
+
+ f_LogMsg "Construct the files Tree with ACLs."
+
+ ROOTDIR=${WORKPLACE}/ar_test_root
+ DEPTH=100
+ STARTID=500
+
+ ACL_AR_FILE=/tmp/acl_test_ar_file
+
+ f_LogMsg "Mkdir root"
+ ${MKDIR_BIN} ${ROOTDIR} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ f_LogMsg "Add ACLs for root."
+ ${SETACL_BIN} -m u:${STARTID}:rwx ${ROOTDIR} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ TESTDIR=${ROOTDIR}
+ for i in $(seq ${DEPTH});do
+ TESTFILE=${TESTDIR}/ar_file_level_${i}
+ TESTDIR=${TESTDIR}/ar_dir_level_${i}
+
+ ${TOUCH_BIN} ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ ${MKDIR_BIN} ${TESTDIR} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ ${SETACL_BIN} -m u:$((${STARTID}+${i})):rwx ${TESTDIR} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ ${SETACL_BIN} -m u:$((${STARTID}+${i})):rw- ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ f_LogMsg "Archive ACLs recursively into a file"
+ ${GETACL_BIN} -R ${ROOTDIR} > ${ACL_AR_FILE} 2>>${LOG_FILE}
+ f_exit_or_not $?
+
+ f_LogMsg "Clear ACLs for files Tree recursively."
+ ${SETACL_BIN} -R -b ${ROOTDIR} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ f_LogMsg "Restore ACLs for files Tree from ar file."
+ ${SETACL_BIN} --restore ${ACL_AR_FILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+ f_LogMsg "Verify the restored ACLs."
+
+ TESTDIR=${ROOTDIR}
+ for i in $(seq ${DEPTH});do
+ TESTFILE=${TESTDIR}/ar_file_level_${i}
+ TESTDIR=${TESTDIR}/ar_dir_level_${i}
+
+ FILE_USER_ID=$(${GETACL_BIN} --omit --numeric ${TESTFILE} 2>>${LOG_FILE}|${SED_BIN} -n '2p'|${CUT_BIN} -d':' -f2)
+ FILE_ACL_PEM=$(${GETACL_BIN} --omit --numeric ${TESTFILE} 2>>${LOG_FILE}|${SED_BIN} -n '2p'|${CUT_BIN} -d':' -f3)
+
+ DIR_USER_ID=$(${GETACL_BIN} --omit --numeric ${TESTDIR} 2>>${LOG_FILE}|${SED_BIN} -n '2p'|${CUT_BIN} -d':' -f2)
+ DIR_ACL_PEM=$(${GETACL_BIN} --omit --numeric ${TESTDIR} 2>>${LOG_FILE}|${SED_BIN} -n '2p'|${CUT_BIN} -d':' -f3)
+
+ if [ ! "${FILE_USER_ID}" = "$((${STARTID}+${i}))" ] || [ ! "${FILE_ACL_PEM}" = "rw-" ];then
+ f_LogMsg "Level ${i}'s testfile's ACLs was not restored correctly"
+ RET=1
+ f_echo_status ${RET}|tee -a ${RUN_LOG_FILE}
+ return -1
+ fi
+
+ if [ ! "${DIR_USER_ID}" = "$((${STARTID}+${i}))" ] || [ ! "${DIR_ACL_PEM}" = "rwx" ];then
+ f_LogMsg "Level ${i}'s testdir's ACLs was not restored correctly"
+ RET=1
+ f_echo_status ${RET}|tee -a ${RUN_LOG_FILE}
+ return -1
+ fi
+
+ done
+
+ f_LogMsg "Remove temporary and testing files."
+ ${RM_BIN} -rf ${WORKPLACE}
+ f_exit_or_not $?
+ ${RM_BIN} -rf ${ACL_AR_FILE}
+ f_exit_or_not $?
+
+ ${MKDIR_BIN} -p ${WORKPLACE}
+ f_exit_or_not $?
+
+ RET=$?
+ f_echo_status ${RET} |tee -a ${RUN_LOG_FILE}
+ ((TEST_PASS++))
+
+ ((TEST_NO++))
+ #8191
+ f_LogRunMsg "[${TEST_NO}] ACLs Limitation Test:"
+ f_LogMsg "Test ${TEST_NO}: ACLs Limitation Test."
+
+ f_LogMsg "Touch testing file ${TESTFILE}"
+ TESTFILE=${WORKPLACE}/acls-test-file
+ ${TOUCH_BIN} ${TESTFILE}
+ f_exit_or_not $?
+
+ ACL_ENTRY_LIMIT=$((8191-4)) #should exclude mask and 3 normal permission entries
+ STARTID=500
+
+ f_LogMsg "Add ${ACL_ENTRY_LIMIT} ACLs entries to reach the limitation."
+ for i in $(seq ${ACL_ENTRY_LIMIT});do
+ ${SETACL_BIN} -m u:$((${STARTID}+${i})):rwx ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ f_LogMsg "Try to exceed ACLs limitation"
+ ${SETACL_BIN} -m u:$((${STARTID}+${i}+1)):rwx ${TESTFILE} >>${LOG_FILE} 2>&1
+ RET=$?
+ if [ ${RET} == "0" ];then
+ f_LogMsg "should not exceed the limit of ACLs"
+ RET=1
+ f_echo_status ${RET}|tee -a ${RUN_LOG_FILE}
+ return -1
+ fi
+
+ f_LogMsg "Remove testing file ${TESTFILE}."
+ ${RM_BIN} -rf ${TESTFILE}
+ f_exit_or_not $?
+
+ RET=$?
+ f_echo_status ${RET} |tee -a ${RUN_LOG_FILE}
+ ((TEST_PASS++))
+
+ ((TEST_NO++))
+ TESTFILE=${WORKPLACE}/acls-huge-entries-test-file
+ f_LogRunMsg "[${TEST_NO}] ACLs Huge Entries Test:"
+ f_LogMsg "Test ${TEST_NO}: ACLs Huge Entries Test."
+
+ f_LogMsg "Touch testing file ${TESTFILE}"
+ TESTFILE=${WORKPLACE}/acls-test-file
+ ${TOUCH_BIN} ${TESTFILE}
+ f_exit_or_not $?
+
+ USERNUM=4000
+ GROUPNUM=4000
+ STARTID=500
+
+ f_LogMsg "Add ${USERNUM} ACLs user entries."
+ for i in $(seq ${USERNUM});do
+ ${SETACL_BIN} -m u:$((${STARTID}+${i})):rwx ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ f_LogMsg "Add ${USERNUM} ACLs group entries."
+ for i in $(seq ${GROUPNUM});do
+ ${SETACL_BIN} -m g:$((${STARTID}+${i})):r-x ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ f_LogMsg "Remove all ACLs entries."
+ ${SETACL_BIN} -b ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+
+
+ f_LogMsg "Add ${USERNUM} ACLs user entries."
+ for i in $(seq ${USERNUM});do
+ ${SETACL_BIN} -m u:$((${STARTID}+${i})):rwx ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ f_LogMsg "Add ${USERNUM} ACLs group entries."
+ for i in $(seq ${GROUPNUM});do
+ ${SETACL_BIN} -m g:$((${STARTID}+${i})):r-x ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ f_LogMsg "Remove ACL entry one by one."
+ for i in $(seq ${USERNUM});do
+ ${SETACL_BIN} -x u:$((${STARTID}+${i})) ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ for i in $(seq ${GROUPNUM});do
+ ${SETACL_BIN} -x g:$((${STARTID}+${i})) ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ f_LogMsg "Remove testing file ${TESTFILE}."
+ ${RM_BIN} -rf ${TESTFILE}
+ f_exit_or_not $?
+
+ RET=$?
+ f_echo_status ${RET} |tee -a ${RUN_LOG_FILE}
+ ((TEST_PASS++))
+
+ ((TEST_NO++))
+ f_LogRunMsg "[${TEST_NO}] Stress ACLs Test:"
+ f_LogMsg "Test ${TEST_NO}: Stress ACLs Test."
+ #huge entries,huge files and dirents
+
+ FILENUM=1000
+ DIRNUM=1000
+ USERNUM=100
+ GROUPNUM=100
+ STARTID=500
+ f_LogMsg "Touch ${FILENUM} files and ${DIRNUM} dirs"
+
+ TESTFILE=${WORKPLACE}/acls-test-file
+ ${TOUCH_BIN} ${TESTFILE}
+
+
+ for i in $(seq ${FILENUM});do
+ TESTFILE=${WORKPLACE}/acls-test-file-${i}
+ ${TOUCH_BIN} ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ for j in $(seq ${USERNUM});do
+ ${SETACL_BIN} -m u:$((${STARTID}+${j})):rwx ${TESTFILE} >>${LOG_FILE} 2>&1
+ done
+ for k in $(seq ${GROUPNUM});do
+ ${SETACL_BIN} -m g:$((${STARTID}+${k})):r-x ${TESTFILE} >>${LOG_FILE} 2>&1
+ done
+
+ done
+
+ for i in $(seq ${DIRNUM});do
+ TESTDIR=${WORKPLACE}/acls-test-dir-${i}
+ ${MKDIR_BIN} ${TESTDIR} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ for j in $(seq ${USERNUM});do
+ ${SETACL_BIN} -m u:$((${STARTID}+${j})):rwx ${TESTDIR} >>${LOG_FILE} 2>&1
+ done
+ for k in $(seq ${GROUPNUM});do
+ ${SETACL_BIN} -m g:$((${STARTID}+${k})):r-x ${TESTDIR} >>${LOG_FILE} 2>&1
+ done
+ for l in $(seq ${USERNUM});do
+ ${SETACL_BIN} -d -m u:$((${STARTID}+${l})):r-- ${TESTDIR} >>${LOG_FILE} 2>&1
+ done
+ done
+
+ f_LogMsg "Remove all ACLs and testing files."
+ for i in $(seq ${FILENUM});do
+ TESTFILE=${WORKPLACE}/acls-test-file-${i}
+ ${SETACL_BIN} -b ${TESTFILE} >>${LOG_FILE} 2>&1
+ ${RM_BIN} -rf ${TESTFILE} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ for i in $(seq ${DIRNUM});do
+ TESTDIR=${WORKPLACE}/acls-test-dir-${i}
+ ${SETACL_BIN} -b ${TESTDIR} >>${LOG_FILE} 2>&1
+ ${RM_BIN} -rf ${TESTDIR} >>${LOG_FILE} 2>&1
+ f_exit_or_not $?
+ done
+
+ RET=$?
+ f_echo_status ${RET} |tee -a ${RUN_LOG_FILE}
+ ((TEST_PASS++))
+
+
+ ${RM_BIN} -rf ${WORKPLACE}
+ f_exit_or_not $?
+}
+
+function f_umount()
+{
+ f_LogMsg "Umount volume after test done"
+ f_LogRunMsg "Umounting volume ${DEVICE} from ${MOUNT_POINT}:"
+ ${UMOUNT_BIN} ${MOUNT_POINT} >>${MOUNTLOG} 2>&1
+ RET=$?
+ f_echo_status ${RET} | tee -a ${RUN_LOG_FILE}
+ f_exit_or_not ${RET}
+}
+function f_cleanup()
+{
+ :
+}
+
+################################################################################
+# Main Entry
+################################################################################
+
+#redfine the int signal hander
+trap 'echo -ne "\n\n">>${RUN_LOG_FILE};echo "Interrupted by Ctrl+C,Cleanuping... "|tee -a ${RUN_LOG_FILE}; f_cleanup;exit 1' SIGINT
+
+f_check $*
+
+START_TIME=${SECONDS}
+f_LogRunMsg "=====================ACLs testing starts on ${FS_TYPE}: `date`=====================\n"
+f_LogMsg "=====================ACLs testing starts on ${FS_TYPE}: `date`====================="
+
+for BLOCKSIZE in 512 1024 2048 4096;do
+ for CLUSTERSIZE in 4096 32768 1048576;do
+ f_mkfs_and_mount
+ f_runtest
+ f_umount
+ done
+done
+
+END_TIME=${SECONDS}
+f_LogRunMsg "=====================ACLs testing ends on ${FS_TYPE}: `date`=====================\n"
+f_LogMsg "=====================ACLs testing ends on ${FS_TYPE}: `date`====================="
+
+f_LogRunMsg "Time elapsed(s): $((${END_TIME}-${START_TIME}))\n"
+f_LogRunMsg "Tests total: ${TEST_NO}\n"
+f_LogRunMsg "Tests passed: ${TEST_PASS}\n"
--
1.5.5
More information about the Ocfs2-test-devel
mailing list