[DTrace-devel] [PATCH v2 01/22] test: Handle dtrace:::ERROR arg3 specially
Kris Van Hees
kris.van.hees at oracle.com
Fri Aug 30 03:29:42 UTC 2024
Here is the attachment I forgot...
On Thu, Aug 29, 2024 at 11:24:53PM -0400, Kris Van Hees wrote:
> How about something a bit simpler like the attached? We don't really need to
> get too specific because as long as the reported PC in the ERROR reporting
> matches a dt_probe_error call site, we know that the reported PC is valid.
>
> I think that would be sufficient as a test for the arg3 value.
>
> On Thu, Aug 29, 2024 at 06:18:19PM -0400, eugene.loh at oracle.com wrote:
> > From: Eugene Loh <eugene.loh at oracle.com>
> >
> > The ERROR probe's arg3 reports the culprit PC, whose value can vary
> > with minor implementation changes. On the one hand, we do not want
> > tests to be overly sensitive to this value. On the other hand, we
> > do want to check the value is correct.
> >
> > Therefore:
> >
> > *) Change tests that dump ERROR's args to omit arg3.
> >
> > *) Add a new test that checks that ERROR's arg3 is correct.
> >
> > Signed-off-by: Eugene Loh <eugene.loh at oracle.com>
> > ---
> > test/unittest/error/tst.DTRACEFLT_UNKNOWN.d | 6 +-
> > test/unittest/error/tst.DTRACEFLT_UNKNOWN.r | 2 +-
> > .../regression/tst.DTRACEFLT_BADADDR.d_path.d | 8 +-
> > .../regression/tst.DTRACEFLT_BADADDR.d_path.r | 2 +-
> > .../unittest/variables/bvar/tst.arg3-ERROR.sh | 172 ++++++++++++++++++
> > 5 files changed, 181 insertions(+), 9 deletions(-)
> > create mode 100755 test/unittest/variables/bvar/tst.arg3-ERROR.sh
> >
> > diff --git a/test/unittest/error/tst.DTRACEFLT_UNKNOWN.d b/test/unittest/error/tst.DTRACEFLT_UNKNOWN.d
> > index 001903ff..bfc77bf5 100644
> > --- a/test/unittest/error/tst.DTRACEFLT_UNKNOWN.d
> > +++ b/test/unittest/error/tst.DTRACEFLT_UNKNOWN.d
> > @@ -1,6 +1,6 @@
> > /*
> > * Oracle Linux DTrace.
> > - * Copyright (c) 2006, 2020, Oracle and/or its affiliates. All rights reserved.
> > + * Copyright (c) 2006, 2024, Oracle and/or its affiliates. All rights reserved.
> > * Licensed under the Universal Permissive License v 1.0 as shown at
> > * http://oss.oracle.com/licenses/upl.
> > */
> > @@ -19,8 +19,8 @@
> >
> > ERROR
> > {
> > - printf("The arguments are %u %u %u %u %u\n",
> > - arg1, arg2, arg3, arg4, arg5);
> > + printf("The arguments are %u %u PC %u %u\n",
> > + arg1, arg2, arg4, arg5);
> > printf("The value of arg4 = %u\n", DTRACEFLT_UNKNOWN);
> > exit(0);
> > }
> > diff --git a/test/unittest/error/tst.DTRACEFLT_UNKNOWN.r b/test/unittest/error/tst.DTRACEFLT_UNKNOWN.r
> > index b11f6c99..3e7caac4 100644
> > --- a/test/unittest/error/tst.DTRACEFLT_UNKNOWN.r
> > +++ b/test/unittest/error/tst.DTRACEFLT_UNKNOWN.r
> > @@ -1,4 +1,4 @@
> > -The arguments are 2 2 4 1 64
> > +The arguments are 2 2 PC 1 64
> > The value of arg4 = 0
> >
> > -- @@stderr --
> > diff --git a/test/unittest/regression/tst.DTRACEFLT_BADADDR.d_path.d b/test/unittest/regression/tst.DTRACEFLT_BADADDR.d_path.d
> > index c23f9503..ec519f4f 100644
> > --- a/test/unittest/regression/tst.DTRACEFLT_BADADDR.d_path.d
> > +++ b/test/unittest/regression/tst.DTRACEFLT_BADADDR.d_path.d
> > @@ -1,10 +1,10 @@
> > /*
> > * Oracle Linux DTrace.
> > - * Copyright (c) 2015, 2020, Oracle and/or its affiliates. All rights reserved.
> > + * Copyright (c) 2015, 2024, Oracle and/or its affiliates. All rights reserved.
> > * Licensed under the Universal Permissive License v 1.0 as shown at
> > * http://oss.oracle.com/licenses/upl.
> > */
> > -/* @@xfail: dtv2 */
> > +/* @@xfail: dtv2 d_path */
> >
> > /*
> > * ASSERTION:
> > @@ -18,8 +18,7 @@
> >
> > ERROR
> > {
> > - printf("The arguments are %u %u %u %u %u\n",
> > - arg1, arg2, arg3, arg4, arg5);
> > + printf("The arguments are %u %u PC %u %u\n", arg1, arg2, arg4, arg5);
> > printf("The value of arg4 should be %u\n", DTRACEFLT_BADADDR);
> > printf("The value of arg5 should be %u\n", 0x18);
> > exit(0);
> > @@ -29,4 +28,5 @@ BEGIN
> > {
> > d = d_path((struct path *)0x18);
> > trace(d);
> > + exit(1);
> > }
> > diff --git a/test/unittest/regression/tst.DTRACEFLT_BADADDR.d_path.r b/test/unittest/regression/tst.DTRACEFLT_BADADDR.d_path.r
> > index 8c601a43..be1f6d5b 100644
> > --- a/test/unittest/regression/tst.DTRACEFLT_BADADDR.d_path.r
> > +++ b/test/unittest/regression/tst.DTRACEFLT_BADADDR.d_path.r
> > @@ -1,4 +1,4 @@
> > -The arguments are 2 1 28 1 24
> > +The arguments are 2 1 PC 1 24
> > The value of arg4 should be 1
> > The value of arg5 should be 24
> >
> > diff --git a/test/unittest/variables/bvar/tst.arg3-ERROR.sh b/test/unittest/variables/bvar/tst.arg3-ERROR.sh
> > new file mode 100755
> > index 00000000..4b139be2
> > --- /dev/null
> > +++ b/test/unittest/variables/bvar/tst.arg3-ERROR.sh
> > @@ -0,0 +1,172 @@
> > +#!/bin/bash
> > +#
> > +# Oracle Linux DTrace.
> > +# Copyright (c) 2024, Oracle and/or its affiliates. All rights reserved.
> > +# Licensed under the Universal Permissive License v 1.0 as shown at
> > +# http://oss.oracle.com/licenses/upl.
> > +#
> > +
> > +##
> > +# ASSERTION: The 'arg3' variable in the ERROR probe is correct.
> > +#
> > +# SECTION: Variables/Built-in Variables/arg3
> > +##
> > +
> > +dtrace=$1
> > +
> > +DIRNAME="$tmpdir/arg3-ERROR.$$.$RANDOM"
> > +mkdir -p $DIRNAME
> > +cd $DIRNAME
> > +
> > +function dump_files {
> > + for x in $*; do
> > + echo ==== $x
> > + cat $x
> > + done
> > +}
> > +
> > +# Run DTrace, also collecting disassembly.
> > +
> > +$dtrace $dt_flags -o D.out -xdisasm=8 -S -qn '
> > +BEGIN /* dt_clause_0 */
> > +{
> > + nerrs = 0;
> > +}
> > +
> > +BEGIN /* dt_clause_1 */
> > +{
> > + x = (int *)64;
> > + y = *x;
> > + trace(y);
> > +}
> > +
> > +BEGIN /* dt_clause_2 */
> > +{
> > + x = (int *)64;
> > + y = *x;
> > + trace(y);
> > +}
> > +
> > +BEGIN /* dt_clause_3 */
> > +{
> > + x = (int *)64;
> > + y = *x;
> > + trace(y);
> > +}
> > +
> > +BEGIN /* dt_clause_4 */
> > +{
> > + x = (int *)64;
> > + y = *x;
> > + trace(y);
> > +}
> > +
> > +BEGIN /* dt_clause_5 */
> > +{
> > + exit(0);
> > +}
> > +
> > +ERROR
> > +{
> > + /* Report the problematic PC and continue execution. */
> > + printf("Error %d at %x\n", ++nerrs, arg3);
> > +}
> > +' >& disasm.out
> > +if [ $? -ne 0 ]; then
> > + echo DTrace failure
> > + dump_files disasm.out
> > + exit 1
> > +fi
> > +
> > +# Parse the disassembly for start PCs for the dt_clause_n.
> > +
> > +awk '
> > +BEGIN { phase = 0 }
> > +
> > +# Look for disassembly of dtrace:::BEGIN.
> > +phase == 0 && /^Disassembly of final program dtrace:::BEGIN:$/ { phase = 1; next }
> > +phase == 0 { next }
> > +
> > +# Look for a blank line, denoting the start of the variable table.
> > +phase == 1 && NF == 0 { phase = 2; next }
> > +phase == 1 { next }
> > +
> > +# Look for a blank line, denoting the start of the BPF relocations.
> > +phase == 2 && NF == 0 { phase = 3; next }
> > +phase == 2 { next }
> > +
> > +# Report PC for each "dt_clause_n" (or a blank line to finish).
> > +phase == 3 && /dt_clause_/ { print $3, $4; next }
> > +phase == 3 && NF == 0 { exit(0) }
> > +phase == 3 { next }
> > +' disasm.out > dt_clause_start_pcs.txt
> > +if [ $? -ne 0 ]; then
> > + echo ERROR: awk
> > + dump_files disasm.out dt_clause_start_pcs.txt
> > + exit 1
> > +fi
> > +
> > +# Confirm that we found expected clauses 0-5.
> > +
> > +for n in 0 1 2 3 4 5; do
> > + echo dt_clause_$n >> dt_clause_start_pcs.txt.check
> > +done
> > +if ! awk '{print $2}' dt_clause_start_pcs.txt | diff - dt_clause_start_pcs.txt.check; then
> > + echo ERROR: did not find expected dt_clause_n
> > + dump_files disasm.out dt_clause_start_pcs.txt
> > +fi
> > +
> > +# Dump the error PCs to a file.
> > +#
> > +# BEGIN has 6 clauses (0-5), but 1-4 have the problematic instructions
> > +# we are looking for: "y = *x". Each time, we check if address x is 0,
> > +# calling dt_probe_error() if necessary. Then we try to dereference x,
> > +# again calling dt_probe_error() if necessary. Since x==64, the second
> > +# dt_probe_error() is the problematic one. We look for those calls.
> > +for n in 1 2 3 4; do
> > + # For dt_clause_$n, find the starting PC.
> > + pc=`awk '$2 == "dt_clause_'$n'" { print $1 }' dt_clause_start_pcs.txt`
> > +
> > + # Look for the starting PC and then the second dt_probe_error().
> > + awk '
> > + BEGIN { phase = 0 }
> > +
> > + # Look for disassembly of dtrace:::BEGIN.
> > + phase == 0 && /^Disassembly of final program dtrace:::BEGIN:$/ { phase = 1; next }
> > + phase == 0 { next }
> > +
> > + # Look for the start PC of dt_clause_n.
> > + phase == 1 && ($1 + 0) == '$pc' { phase = 2; next }
> > + phase == 1 { next }
> > +
> > + # Look for the first dt_probe_error() call.
> > + phase == 2 && /dt_probe_error/ { phase = 3; next }
> > + phase == 2 { next }
> > +
> > + # Look for the second dt_probe_error() call, reporting the PC and quitting.
> > + phase == 3 && /dt_probe_error/ { print $1 + 0; exit(0) }
> > + phase == 3 { next }
> > + ' disasm.out >> err_pcs.txt
> > +done
> > +
> > +# Do a sanity check on DTrace's error output.
> > +
> > +awk '/^dtrace: error on enabled probe ID [0-9]* \(ID 1: dtrace:::BEGIN): invalid address \(0x40) in action #[0-9] at BPF pc [0-9]*$/ { print $NF }' \
> > + disasm.out > err_pcs.txt.chk1
> > +if ! diff -q err_pcs.txt err_pcs.txt.chk1; then
> > + echo ERROR: problem with DTrace error output
> > + dump_files disasm.out err_pcs.txt err_pcs.txt.chk1
> > + exit 1
> > +fi
> > +
> > +# Check the D script output... the arg3 values reported by the dtrace:::ERROR probe.
> > +
> > +if ! awk 'NF != 0 { print strtonum("0x"$NF) }' D.out | diff -q - err_pcs.txt; then
> > + echo ERROR: D script output looks wrong
> > + dump_files D.out err_pcs.txt
> > + exit 1
> > +fi
> > +
> > +echo success
> > +
> > +exit 0
> > --
> > 2.43.5
> >
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tst.arg3-ERROR.sh
Type: application/x-sh
Size: 1221 bytes
Desc: not available
URL: <http://oss.oracle.com/pipermail/dtrace-devel/attachments/20240829/f997c1b6/attachment-0001.sh>
More information about the DTrace-devel
mailing list