Oracle Legal Notices
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.
License Restrictions Warranty/Consequential Damages Disclaimer
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.
Restricted Rights Notice
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:
U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.
Hazardous Applications Notice
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.
Third-Party Content, Products, and Services Disclaimer
This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.
Alpha and Beta Draft Documentation Notice Disclaimer
If this document is in preproduction status:
This documentation is in preproduction status and is intended for demonstration and preliminary use only. It may not be specific to the hardware on which you are using the software. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to this documentation and will not be responsible for any loss, costs, or damages incurred due to the use of this documentation.
This document contains information on Quarterly Update 5 to the Unbreakable Enterprise Kernel Release 2. This document may be updated after it is released. To check for updates to this document, and to view other Oracle documentation, refer to the Documentation section on the Oracle Technology Network (OTN) Web site:
This document is intended for users and administrators of Oracle Linux. It describes potential issues and the corresponding workarounds you may encounter while using the Unbreakable Enterprise Kernel Release 2 with Oracle Linux 5 and Oracle Linux 6. Oracle recommends that you read this document before installing or upgrading the Unbreakable Enterprise Kernel Release 2.
Document generated on: 2013-09-28 (revision: 1240)
Table of Contents
The Oracle Linux Unbreakable Enterprise Kernel Release Notes provides a summary of the new features, changes, and fixed and known issues in the Unbreakable Enterprise Kernel Release 2.
This document is written for system administrators who want to use the Unbreakable Enterprise Kernel with Oracle Linux. It is assumed that readers have a general understanding of the Linux operating system.
For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.
Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.
The latest version of this document and other documentation for this product are available at:
The following text conventions are used in this document:
Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary.
Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values.
Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.
The Unbreakable Enterprise Kernel Release 2 (UEK R2) is Oracle's second major release of its heavily tested and optimized operating system kernel for Oracle Linux 5 and Oracle Linux 6. See the initial Oracle Unbreakable Enterprise Kernel Release 2 Release Notes (https://oss.oracle.com/ol6/docs/RELEASE-NOTES-UEK2-en.html) for a detailed description of the differences between UEK R2 and the first version of the Unbreakable Enterprise Kernel.
The 2.6.39-400.209.1 release is the fifth quarterly driver update release, which also includes bug and security fixes.
The version number displayed by the kernel and on the RPM packages is 2.6.39. This was done to avoid potential breakage of certain low-level utilities of the Oracle Linux distribution (also known as the plumbing) that potentially cannot cope with the new 3.x version scheme. Regular Linux applications are usually neither aware of nor affected by Linux kernel version numbers.
Xsigo virtual host adapter and network drivers to support Oracle SDN (Software Defined Network), previously known as Xsigo Fabric Accelerator.
LSI Fusion-MPT SAS 3.0 driver to support up to 12 Gb/s host controllers.
Relative to quarterly update 4, several improvements have been incorporated into the Unbreakable Enterprise Kernel to support Xen usage:
Fixes for EDD, x2apic, XenBus, and PVHVM vCPU hotplug issues.
The indirect-descriptor feature, which increases throughput and reduces latency for block I/O.
The Unbreakable Enterprise Kernel supports a wide range of hardware and devices. In close cooperation with hardware and storage vendors, several device drivers have been updated by Oracle.
AACRAID driver (
aacraid) updated to 1.2-0-ms.
Cisco FCoE HBA Driver (
fnic) updated to 184.108.40.206.
Fibre Channel HBA driver (
lpfc) updated to
C600 serial attached SCSI (SAS) module (
isci) updated to
LSI Fusion-MPT base driver (
mptbase) updated to
ioctl driver (
LSI Fusion-MPT Fibre Channel host driver (
mptfc) updated to
LSI Fusion-MPT IP Over Fibre Channel driver (
mptlan) updated to
LSI Fusion-MPT SAS driver (
mptsas) updated to
LSI Fusion-MPT SCSI host driver (
mptscsih) updated to
LSI Fusion-MPT SPI host driver (
mptspi) updated to
LSI Fusion-MPT SAS 2.0 driver (
mpt2sas) updated to
LSI Fusion-MPT SAS 3.0 driver (
mpt3sas) version 3.00.00.00
added. Supports up to 12 Gb/s host controllers.
MegaRAID SAS driver (
megaraid_sas) updated to
iSCSI driver (
qla4xxx) updated to 5.03.00.03.06.02-uek2.
Core services module driver (
xscore) version 6.0.r7269 added.
Required by all other Xsigo modules.
Virtual HBA driver (
xsvhba) version 6.0.r7269 added.
Tigon3 Ethernet adapter driver (
tg3) updated to 3.131d.
Blade Engine 2 10Gbps adapter driver (
be2net) updated to
PRO/1000 PCI-Express Gigabit network adapter driver (
updated to 2.4.14.
Gigabit Ethernet network adapter driver (
igb) updated to
Gigabit Linux driver (
igbvf) updated to 2.3.2. Provides
82576-based virtual function devices on kernels that support Single Root I/O
10 Gigabit PCI-Express network adapter driver (
1/10 GbE Converged/Intelligent Ethernet Adapter driver (
updated to 5.2.43.
Core services module driver (
xscore) version 6.0.r7269 added.
Required by all other Xsigo modules.
Virtual Ethernet driver (
Virtual NIC driver (
xsvnic) version 0.316.0.r7269 added.
The following features included in the Unbreakable Enterprise Kernel Release 2 are still under development, but are made available for testing and evaluation purposes.
DRBD (Distributed Replicated Block Device)
A shared-nothing, synchronously replicated block device (RAID1 over network), designed to serve as a building block for high availability (HA) clusters. It requires a cluster manager (for example, pacemaker) for automatic failover.
Kernel module signing facility
Applies cryptographic signature checking to modules on module load, checking the signature against a ring of public keys compiled into the kernel. GPG is used to do the cryptographic work and determines the format of the signature and key data.
Linux Containers (lxc)
Based on the Linux Cgroups and name spaces functionality, containers allow you to
safely and securely run multiple applications or instances of an operating system on a
single host without risking them interfering with each other. Containers are lightweight
and resource-friendly, which saves both rack space and power. In order to get started
with containers, you need to install the
lxc package, which is
included in the package repository of the Unbreakable Enterprise Kernel.
Transcendent Memory (tmem for short) provides a new approach for improving the utilization of physical memory in a virtualized environment by claiming underutilized memory in a system and making it available where it is most needed. From the perspective of an operating system, tmem is fast pseudo-RAM of indeterminate and varying size that is useful primarily when real RAM is in short supply. To learn more about this technology and its use cases, see the Transcendent Memory project page at http://oss.oracle.com/projects/tmem/.
Oracle Linux maintains user-space compatibility with Red Hat Enterprise Linux, which is independent of the kernel version running underneath the operating system. Existing applications in user space will continue to run unmodified on the Unbreakable Enterprise Kernel Release 2 and no re-certifications are needed for RHEL certified applications.
From UEK R2 quarterly update 3 (2.6.39-400) onward, support for IB, OFED, and RDS is
integrated into the kernel. The OFED userland RPMs continue to be provided, but the
ofa-kernel RPMs are no longer
The kernel ABI remains unchanged in all updates to UEK R2 subsequent to quarterly update 3.
To minimize impact on interoperability during releases, the Oracle Linux team works closely with third-party vendors whose hardware and software have dependencies on kernel modules. However, to allow the introduction of new drivers, there might be instances where changes must be made. Before installing this update, verify the support status of this release with your application vendor.
This chapter describes the fixed and known issues for the Unbreakable Enterprise Kernel Release 2.
Run the yum update command regularly to ensure that the latest bug fixes and security errata are installed on your system.
This update includes minor fixes for various software issues as well as security fixes for several CVEs. There are no major fixed issues of note.
This section describes known issues in this update.
One some systems you might see ACPI-related error messages in
similar to the following:
ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND ACPI Error: Method parse/execution failed [_SB_._OSC||\||] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits)]]>
These messages, which are not fatal, are caused by bugs in the BIOS. Contact your system vendor for a BIOS update. (Bug ID 13100702)
/etc/init.d/oracleasm, with the parameter
scandisks can lead to error messages about missing devices similar to
oracleasm-read-label: Unable to open device "
device": No such file or directory
However, the device actually exists. You can ignore this error message, which is
triggered by a timing issue. Only use the
init script to start and stop
oracleasm service. All other options, such as scandisks,
createdisk, are deprecated. For these
and other administrative tasks, use
/usr/sbin/oracleasm instead. (Bug ID
When using the
bnx2x driver in a bridge, disable Transparent Packet
Aggregation (TPA) by including the statement
options bnx2x disable_tpa=1
/etc/modprobe.conf. (Bug ID 14626070)
Together with the UEK R2 kernel in quarterly update 4, a new version of the
btrfs-progs-0.20-1.4) was provided on the
ol6_latest channel. This package enabled command-line access to new
btrfs features. If you install this version or later of the
btrfs-progs package on a system that does not have an upgraded
kernel, most of the new command functionality supported by the package fails with the
Inappropriate ioctl for device. The exception is the
-l option to mkfs.btrfs, which requires version
2.6.39-400.109.1 or later of the Unbreakable Enterprise Kernel. Do not use this option
with an non-upgraded kernel as correct functioning of the file system cannot be
guaranteed. Although the leaf size appears to be set successfully, there is a risk of
data corruption if you subsequently use the resulting file system. (Bug ID
If you use the --alloc-start option with
mkfs.btrfs to specify an offset for the start of the file system,
the size of the file system should be smaller but this is not the case. It is also
possible to specify an offset that is higher than the device size. This bug is present
in the user-space
btrfs-progs-0.20-1.4). (Bug ID 16946255)
The usage information for mkfs.btrfs reports
raid6 as possible profiles for both
data and metadata. However, the kernel does not support these features and cannot mount
file systems that use them. This bug is present in the user-space
btrfs-progs package (
The btrfs filesystem balance command does not warn that the RAID level can be changed under certain circumstances, and does not provide the choice of cancelling the operation. (Bug ID 16472824)
Converting an existing
ext4 root file system to
btrfs does not carry
over the associated security contexts that are stored as part of a file's extended
attributes. With SELinux enabled and set to enforcing mode, you might experience many
permission denied errors after reboot, and the system might be unbootable. To avoid this
problem, enforce automatic file system relabeling to run at bootup time. To trigger
automatic relabeling, create an empty file named
example, by using touch) in the file system's
directory before rebooting the system after the initial conversion. The presence of this
file instruct SELinux to recreate the security attributes for all files on the file
system. If you forget to do this and rebooting fails, either temporarily disable SELinux
completely by adding
selinux=0 to the kernel boot parameters, or
disable enforcing of the SELinux policy by adding
A failing RAID1 disk can result in a kernel panic with the error message:
BTRFS error (device (null)) in btree_writepage_io_failed_hook:3662: \ IO failure (Error occurred while writing out btree at offset).
(Bug ID 16262571)
The btrfs filesystem defragment command exits with an exit code of 20 even if it succeeds. (Bug ID 13714531)
Commands such as du can show inconsistent results for file
sizes in a
btrfs file system when the number of bytes that is under
delayed allocation is changing. (Bug ID 13096268)
Btrfs has a limit of 237 or fewer hard links to a file from a single directory. The
exact limit depends on the number of characters in the file name. The limit is 237 for a
file with up to eight characters in its file name; the limit is lower for longer file
names. Attempting to create more than this number of links results in the error
Too many links. You can create more hard links to the same file
from another directory. (Bug ID 16278563)
If you run the btrfs quota enable command on a non-empty file system, any existing files do not count toward space usage. Removing these files can cause usage reports to display negative numbers and the file system to be inaccessible. The workaround is to enable quotas immediately after creating the file system. If you have already written data to the file system, it is too late to enable quotas. (Bug ID 16569350)
The btrfs quota rescan command is not currently implemented. The command does not perform a rescan and returns without displaying any message.
The functionality to limit the space that is available to a quota group before compressing the subvolume is not yet implemented. The -c option (limit the space after compression) to the btrfs qgroup limit command is implicitly enabled. (Bug ID 16569387)
The copy-on-write nature of btrfs means that every operation on the file system initially requires disk space. It is possible that you cannot execute any operation on a disk that has no space left; even removing a file might not be possible. The workaround is to run sync before retrying the operation. If this does not help, remount the file system with the -o nodatacow option and delete some files to free up space. See https://btrfs.wiki.kernel.org/index.php/ENOSPC.
The seed-device functionality of btrfs causes a kernel panic when the btrfs device add command is run. There is currently no known workaround for this issue. (Bug ID 17334251)
When running Oracle Linux with UEK R2, you might see error messages in
/var/log/messages similar to this
microcode: CPU0 update to revision 0x6b failed.
You can ignore this warning. You do not need to upgrade the microcode for virtual CPUs as presented to the guest. (Bug ID 12576264, 13782843)
If DHCP lease negotiation takes more than 5 seconds at boot time, the following message is displayed:
X: failed. No link present. Check cable?
If the ethtool eth
X command confirms that
the interface is present, edit
N is a value greater than 5 seconds (for example, 30 seconds).
Alternatively, use NetworkManager to configure the interface. (Bug ID 16620177)
request_firmware interface to the Emulex Ethernet driver for
Emulex OneConnect adapters supports flash updating of the UCNA firmware image.
Oracle Linux 5 systems with the Unbreakable Enterprise Kernel require the
ethtool-6-4.0.1.el5. version of
ethtool package, where
x86_64 as appropriate. The package is
available from the
ol5_x86_64_UEK_latest channels on the Unbreakable Linux Network
(Advisory ELBA-2013-2544, released Aug 29, 2013) or from Oracle Public Yum at
Oracle Linux 6 systems with the Unbreakable Enterprise Kernel do not require a package update.
You can update the firmware image while the UCNA is online and passing network or storage traffic. However, you must reboot the system for the new firmware image to take effect.
To update the UCNA firmware image:
Copy the firmware image file (for example,
be3flash.ufi) to the
cp be3flash.ufi /lib/firmware
Start the update process:
ethtool -f ethN be3flash.ufi 0
eth is the name of the
Reboot the system to enable the new firmware image to take effect.
You can safely ignore the following firmware warning message that might be displayed on some Sun hardware:
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
(Bug ID 13696512)
The Unbreakable Enterprise Kernel uses the
deadline scheduler as the
default I/O scheduler. For the Red Hat Compatible Kernel, the default I/O scheduler is the
You might see the following warning messages if you use the ibportstate disable command to disable a switch port:
ibwarn:  _do_madrpc: recv failed: Connection timed out ibwarn:  mad_rpc: _do_madrpc failed; dport (Lid 38) ibportstate: iberror: failed: smp set portinfo failed
You can safely ignore these warnings. (Bug ID 16248314)
The following message might appear in
WARNING! power/level is deprecated; use power/control instead.
The USB subsystem in UEK R2 deprecates the
attribute in favor of the
power/control attribute. The
libfprint fingerprinting library triggers this warning via
udev rules that try to use the old attribute first. You can safely
ignore this warning. The setting of the appropriate power level still succeeds. (Bug ID
At boot time, the root file system is not writable when the multipathing service starts.
As a result, the system cannot automatically generate the file
/etc/multipath/wwids and the console displays a message similar to the
Cannot open file [/etc/multipath/wwids] readonly: No such file or directory
You can safely ignore this warning. The subsequent post-boot operation of
device-mapper-multipath is not
To prevent this warning message from recurring, enter the following command as
root to generate
/etc/multipath/wwids after the
system has booted:
(Bug ID 17395420, 16076888)
If you specify both the
when opening a regular file in a mounted NFS version 4 file system,the calling process
hangs. The workaround is not to use this combination of flags with regular files.
O_TRUNC is intended for use with regular files where the open mode
allows writing. (Bug ID 17412390)
After upgrading to UEK R2, the NVIDIA driver upgrade script does not correctly blacklist
the Nouveau kernel driver. To blacklist the driver, append
nouveau.modeset=0 to the kernel boot parameters in
You can safely ignore the following warning messages in
/var/log messages if you see them on a non-NUMA system:
kernel: NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10 hcid: Register path:/org/bluez fallback:1 kernel: No NUMA configuration found
(Bug ID 13711370)
You can safely ignore the following error message:
Error: Driver 'pcspkr' is already registered, aborting...
The message arises from an alias conflict between
pcspkr. To prevent the message from being displayed, add the following
(Bug ID 10355937)
For the Unbreakable Enterprise Kernel,
set by default. For the Red Hat Compatible Kernel,
kernel.sched_compat_yield=0 is used by default.
When upgrading or installing the UEK R2 kernel on fast hardware, usually with SAN
storage attached, the kernel can fail to boot and
BUG: soft lockup
messages are displayed in the console log. The workaround is to increase the baud rate from
the default value of 9600 by amending the kernel boot line in
/boot/grub/grub.conf to include an appropriate console setting, for
A value of 115200 is recommended as smaller values such as 19200 are known to be insufficient for some systems (for example, see http://docs.oracle.com/cd/E19045-01/blade.x6220/820-0048-18/sp.html#0_pgfId-1002490). If the host implements an integrated system management infrastructure, such as ILOM on Sun and Oracle systems or iLO on HP systems, configure the integrated console baud rate to match the setting for the host system. Otherwise, the integrated console is likely to display garbage characters. (Bug ID 17064059, 17252160)
Releases of Oracle Linux prior to Oracle Linux 5 supplied a hugemem kernel to allow a system to address up to 64 GB of memory in 32-bit mode. The hugemem kernel is no longer available in Oracle Linux 5 and later releases.
The Unbreakable Enterprise Kernel (UEK) supports a maximum of 16 GB of memory for 32-bit kernels on bare metal and hardware virtualized machine (HVM) systems, and 8 GB for fully paravirtualized machine (PVM) systems. 32-bit PVM guest operating systems must be located in the first 128 GB of physical memory on the host.
The Red Hat Compatible Kernel (RHCK) has the same limitations, except that PVM systems can have up to 16 GB of memory. The limitation of 8 GB for PVM on UEK was chosen for reasons of reliability.
A 32-bit system uses the PAE (physical address extension) memory feature to map physical memory beyond 4 GB into the 32-bit address space that is available to each process. A 64-bit system can address memory beyond 4 GB without requiring an extra layer of memory abstraction.
Oracle Linux on x86_64 includes 32-bit libraries, which allow applications built for both 64-bit and 32-bit Linux to run on the same system. This capability provides scalability to virtually unlimited memory sizes, while retaining the ability to run 32-bit applications. Oracle recommends this configuration for any system with more than 4 GB of memory. (Bug ID 16974301)
This update removes the Transparent Huge Pages (THP) feature. Following extensive benchmarking and testing, Oracle found that THP caused a performance degradation for some workloads of between 5 and 10%. This performance degradation was a result of a slower memory allocator code path being used even when the applications were not using THP. When the fact that huge pages are not swappable was taken into account, the positive effect that THP should provide was outweighed by its negative effects.
After installing this update, you cannot enable THP (for example, by specifying kernel
boot parameters). The THP settings under
/sys/kernel/mm/transparent_hugepage have also been removed. A future
update might contain an updated THP implementation which resolves the performance
This change does not affect support for applications that use explicit huge pages (for example, Oracle Database).
(Bug ID 17279055)
A message similar to the following might be recorded in
/var/log/messages at boot
pid/oom_adj is deprecated, please use /proc/
udev process uses the deprecated
kernel interface to prevent it from being killed if the system runs short of memory. You can
safely ignore the message as the action still succeeds. To prevent the message from
occurring, install the package
udev-147-2.42.el6. or higher for
Oracle Linux 6, or
udev-095-220.127.116.11.el5. or higher
for Oracle Linux 5. (Bug ID 13655071, 13712009)
When booting UEK R2 as a PVHVM guest, you can safely ignore the following kernel message:
register_vcpu_info failed: err=-38
(Bug ID 13713774)
Under Oracle VM Server 3.1.1, migrating a PVHVM guest that is running the UEK R2 Quarterly Update 5 kernel causes a disparity between the date and time as displayed by date and hwclock. The workaround post migration is either to run the command hwclock --hctosys on the guest or to reboot the guest. (Bug ID 16861041)
Under Oracle VM Server 2.2.2, increasing the memory that is assigned to an Oracle Linux 6 Update 4 x86_64 HVM guest running UEK R2 Quarterly Update 5 causes the guest to reboot. There is no known workaround for this issue. (Bug ID 17440635)
Reading from or writing to a
device on a read-only XFS file system fails with the following error:
XFS_IOC_FSGEOMETRY: Inappropriate ioctl for device
(Bug ID 16970090)
Newly created directories in an XFS file system do not inherit their group setting
from the parent directory on which the
setgid bit is set. (Bug ID
The Unbreakable Enterprise Kernel Release 2 Quarterly Update 5 can be installed on Oracle Linux 5 Update 8 or newer, as well as Oracle Linux 6 Update 2 or newer, both running either the Red Hat compatible kernel or a previous version of the Unbreakable Enterprise Kernel. If you are still running an older version of Oracle Linux, first update your system to the latest available update release.
The kernel images are available as binary RPM packages from dedicated channels on Oracle's Unbreakable Linux Network (ULN) as well as the Oracle Public Yum repository. Four channels are available:
Oracle Linux 5 (x86):
Oracle Linux 5 (x86_64):
Oracle Linux 6 (x86):
Oracle Linux 6 (x86_64):
If your system is registered with ULN, make sure you subscribe it to the appropriate
For Oracle Public Yum, the appropriate
UEK_latest channel is
automatically enabled in the yum respiratory file under
when you install Oracle Linux 5 update 9 or later and Oracle Linux 6 update 3 or later.
To upgrade an existing Oracle Linux 5 or Oracle Linux 6 installation to the latest UEK
R2, enable the appropriate
UEK_latest channel and run yum
For detailed instructions on how to download and install the Unbreakable Enterprise Kernel on Oracle Linux see the Getting Started with the Unbreakable Enterprise Kernel for Oracle Linux document on the Oracle Technology Network (OTN) at http://www.oracle.com/technetwork/articles/servers-storage-admin/uek-rel2-getting-started-1555632.html.
If you have questions regarding configuring or using yum to install updates, refer to the Oracle Linux Administrator's Solutions Guide at http://docs.oracle.com/cd/E37670_01/index.html.
For information about using ULN, see the Oracle Linux Unbreakable Linux Network User's Guide at http://docs.oracle.com/cd/E37670_01/index.html.
The kernel's source code is available via a public git source code repository at http://oss.oracle.com/git/?p=linux-uek-2.6.39.git.