HPONCFG RILOE II/iLO setup and configuration utility
Version 1.7 (c) Hewlett-Packard Company, 2007-2008
 
ERROR:  Could not find the iLO/RILOE-II Device Node.
	Please check if the driver module is installed properly.
	ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' or 'hprsm' RPM) for iLO. 
HPONCFG RILOE II/iLO setup and configuration utility
Version 1.7 (c) Hewlett-Packard Company, 2007-2008
 
ERROR:  Could not find the iLO/RILOE-II Device Node.
	Please check if the driver module is installed properly.
	ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' or 'hprsm' RPM) for iLO. 
HPONCFG RILOE II/iLO setup and configuration utility
Version 1.7 (c) Hewlett-Packard Company, 2007-2008
 
ERROR:  Could not find the iLO/RILOE-II Device Node.
	Please check if the driver module is installed properly.
	ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' or 'hprsm' RPM) for iLO. 
HPONCFG RILOE II/iLO setup and configuration utility
Version 1.7 (c) Hewlett-Packard Company, 2007-2008
 
ERROR:  Could not find the iLO/RILOE-II Device Node.
	Please check if the driver module is installed properly.
	ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' or 'hprsm' RPM) for iLO. 
HPONCFG RILOE II/iLO setup and configuration utility
Version 1.7 (c) Hewlett-Packard Company, 2007-2008
 
ERROR:  Could not find the iLO/RILOE-II Device Node.
	Please check if the driver module is installed properly.
	ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' or 'hprsm' RPM) for iLO. 
HPONCFG RILOE II/iLO setup and configuration utility
Version 1.7 (c) Hewlett-Packard Company, 2007-2008
 
ERROR:  Could not find the iLO/RILOE-II Device Node.
	Please check if the driver module is installed properly.
	ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' or 'hprsm' RPM) for iLO. 
HPONCFG RILOE II/iLO setup and configuration utility
Version 1.7 (c) Hewlett-Packard Company, 2007-2008
 
ERROR:  Could not find the iLO/RILOE-II Device Node.
	Please check if the driver module is installed properly.
	ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' or 'hprsm' RPM) for iLO. 
HPONCFG RILOE II/iLO setup and configuration utility
Version 1.7 (c) Hewlett-Packard Company, 2007-2008
 
ERROR:  Could not find the iLO/RILOE-II Device Node.
	Please check if the driver module is installed properly.
	ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' or 'hprsm' RPM) for iLO. 
HPONCFG RILOE II/iLO setup and configuration utility
Version 1.7 (c) Hewlett-Packard Company, 2007-2008
 
ERROR:  Could not find the iLO/RILOE-II Device Node.
	Please check if the driver module is installed properly.
	ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' or 'hprsm' RPM) for iLO. 
HPONCFG RILOE II/iLO setup and configuration utility
Version 1.7 (c) Hewlett-Packard Company, 2007-2008
 
ERROR:  Could not find the iLO/RILOE-II Device Node.
	Please check if the driver module is installed properly.
	ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' or 'hprsm' RPM) for iLO. 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
Error processing the XML file : /home/rdunlap/scripts/ilo-getpower.xml
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
Error processing the XML file : /home/rdunlap/scripts/ilo-getpower.xml
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
Error processing the XML file : /home/rdunlap/scripts/ilo-getpower.xml
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
Error processing the XML file : /home/rdunlap/scripts/ilo-getpower.xml
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 

CpqCiSend() failed (20,14h) Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="148" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
Error processing the XML file : /home/rdunlap/scripts/ilo-getpower.xml
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
Error processing the XML file : /home/rdunlap/scripts/ilo-getpower.xml
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
Error processing the XML file : /home/rdunlap/scripts/ilo-getpower.xml
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 

CpqCiSend() failed (20,14h) Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
Error processing the XML file : /home/rdunlap/scripts/ilo-getpower.xml
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
Error processing the XML file : /home/rdunlap/scripts/ilo-getpower.xml
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
Error processing the XML file : /home/rdunlap/scripts/ilo-getpower.xml
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="147" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
Error processing the XML file : /home/rdunlap/scripts/ilo-getpower.xml
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded 
Firmware Revision = 1.77 Device type = iLO 2 Driver name = 
<GET_POWER_READINGS>
<PRESENT_POWER_READING VALUE="146" UNIT="Watts"/>
<AVERAGE_POWER_READING VALUE="148" UNIT="Watts"/>
<MAXIMUM_POWER_READING VALUE="251" UNIT="Watts"/>
<MINIMUM_POWER_READING VALUE="145" UNIT="Watts"/>
</GET_POWER_READINGS>
Script succeeded