========== hostname -s: ==========
ca-ostest293
========== domainname: ==========
us.oracle.com
========== uname -a: ==========
Linux ca-ostest293.us.oracle.com 2.6.29-rc4-git1 #1 SMP Sun Feb 8 17:45:35 PST 2009 x86_64 x86_64 x86_64 GNU/Linux
========== df -Th: ==========
Filesystem    Type    Size  Used Avail Use% Mounted on
/dev/cciss/c0d0p3
              ext3     49G   36G   11G  77% /
/dev/cciss/c0d0p1
              ext3    251M  100M  138M  43% /boot
tmpfs        tmpfs    4.0G  4.1M  4.0G   1% /dev/shm
/dev/cciss/c0d1p1
              ext3     48G   23G   23G  50% /home
/dev/cciss/c0d1p2
              ext3     87G   20G   63G  25% /opt
/dev/sda1     ext3    470G  242G  204G  55% /olt-storage
ca-ostest292:/cruc/packages
               nfs     49G   36G   11G  77% /cruc/packages
ca-ostest292:/cruc/plans
               nfs     49G   36G   11G  77% /cruc/plans
ca-ostest292:/cruc/runs
               nfs     49G   36G   11G  77% /cruc/runs
ca-ostest292:/cruc/suts
               nfs     49G   36G   11G  77% /cruc/suts
ca-ostest292:/cruc/usr
               nfs     49G   36G   11G  77% /cruc/usr
ca-ostest292:/cruc/etc
               nfs     49G   36G   11G  77% /cruc/etc
ca-ostest292:/cruc
               nfs     49G   36G   11G  77% /cruc
========== mount: ==========
/dev/cciss/c0d0p3 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/cciss/c0d0p1 on /boot type ext3 (rw)
tmpfs on /dev/shm type tmpfs (rw)
/dev/cciss/c0d1p1 on /home type ext3 (rw,noatime,data=writeback)
/dev/cciss/c0d1p2 on /opt type ext3 (rw,noatime,data=writeback)
/dev/sda1 on /olt-storage type ext3 (rw,noatime,data=writeback)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
ca-ostest292:/cruc/packages on /cruc/packages type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76)
ca-ostest292:/cruc/plans on /cruc/plans type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76)
ca-ostest292:/cruc/runs on /cruc/runs type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76)
ca-ostest292:/cruc/suts on /cruc/suts type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76)
ca-ostest292:/cruc/usr on /cruc/usr type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76)
ca-ostest292:/cruc/etc on /cruc/etc type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76)
ca-ostest292:/cruc on /cruc type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76)
hugetlbfs on /mnt/hugetlbfs type hugetlbfs (rw)
========== lsmod: ==========
Module                  Size  Used by
jbd2                   52824  0 
ocfs2_nodemanager     200584  0 
ocfs2_stackglue        10968  0 
quota_tree              8008  0 
hpilof                 32852  0 
parport_pc             27496  0 
lp                     11684  0 
parport                36048  2 parport_pc,lp
tg3                   104844  0 
lpfc                  271396  1 
cciss                  36392  7 
ehci_hcd               33364  0 
ohci_hcd               22596  0 
uhci_hcd               21800  0 
========== lshw: ==========
/cruc/usr/bin/sut_sysinfo: line 11: lshw: command not found
========== lspci -vvv: ==========
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [44] HyperTransport: Slave or Primary Interface
		Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
		Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
		Revision ID: 1.03
		Link Frequency 0: 1.0GHz
		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
		Link Frequency 1: 200MHz
		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
		Prefetchable memory behind bridge Upper: 00-00
		Bus Number: 00
	Capabilities: [e0] HyperTransport: MSI Mapping

00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev b1)
	Subsystem: nVidia Corporation Unknown device cb84
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Unknown device 31f8
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at f7de0000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a4) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Unknown device 31f8
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 23
	Region 0: Memory at f7dd0000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=120
	I/O behind bridge: 00001000-00002fff
	Memory behind bridge: f7e00000-f7ffffff
	Prefetchable memory behind bridge: e8000000-efffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: f8000000-f9ffffff
	Prefetchable memory behind bridge: 0000000090000000-0000000090000000
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0f00c  Data: 4149
	Capabilities: [58] HyperTransport: MSI Mapping
	Capabilities: [80] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <512ns, L1 <4us
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 3
		Link: Latency L0s <512ns, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 8, PowerLimit 25.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd On, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [160] Advanced Error Reporting

00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fa000000-fbffffff
	Prefetchable memory behind bridge: 0000000090100000-0000000090100000
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0f00c  Data: 4151
	Capabilities: [58] HyperTransport: MSI Mapping
	Capabilities: [80] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <512ns, L1 <4us
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 2
		Link: Latency L0s <512ns, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 4, PowerLimit 25.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd On, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [160] Advanced Error Reporting

00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fdc00000-fdcfffff
	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0f00c  Data: 4159
	Capabilities: [58] HyperTransport: MSI Mapping
	Capabilities: [80] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <512ns, L1 <4us
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 1
		Link: Latency L0s <512ns, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 2, PowerLimit 25.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd On, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [160] Advanced Error Reporting

00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=08, subordinate=0a, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: fdd00000-fddfffff
	Prefetchable memory behind bridge: 0000000090200000-0000000090200000
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0f00c  Data: 4161
	Capabilities: [58] HyperTransport: MSI Mapping
	Capabilities: [80] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <512ns, L1 <4us
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
		Link: Latency L0s <512ns, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 1, PowerLimit 25.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd On, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [160] Advanced Error Reporting

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Capabilities: [80] HyperTransport: Host or Secondary Interface
		!!! Possibly incomplete decoding
		Command: WarmRst+ DblEnd-
		Link Control: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
		Revision ID: 1.02
	Capabilities: [a0] HyperTransport: Host or Secondary Interface
		!!! Possibly incomplete decoding
		Command: WarmRst+ DblEnd-
		Link Control: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
		Revision ID: 1.02
	Capabilities: [c0] HyperTransport: Host or Secondary Interface
		!!! Possibly incomplete decoding
		Command: WarmRst+ DblEnd-
		Link Control: CFlE+ CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
		Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
		Revision ID: 1.02

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Capabilities: [f0] #0f [0010]

00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Capabilities: [80] HyperTransport: Host or Secondary Interface
		!!! Possibly incomplete decoding
		Command: WarmRst+ DblEnd-
		Link Control: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
		Revision ID: 1.02
	Capabilities: [a0] HyperTransport: Host or Secondary Interface
		!!! Possibly incomplete decoding
		Command: WarmRst+ DblEnd-
		Link Control: CFlE+ CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
		Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
		Revision ID: 1.02
	Capabilities: [c0] HyperTransport: Host or Secondary Interface
		!!! Possibly incomplete decoding
		Command: WarmRst+ DblEnd-
		Link Control: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
		Revision ID: 1.02

00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Capabilities: [f0] #0f [0010]

01:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA])
	Subsystem: Hewlett-Packard Company Unknown device 31fb
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 127 (2000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 1000 [size=256]
	Region 2: Memory at f7ff0000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at f7e00000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03)
	Subsystem: Hewlett-Packard Company Unknown device 3305
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 2800 [size=256]
	Region 1: Memory at f7fe0000 (32-bit, non-prefetchable) [size=512]
	Capabilities: [f0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out  Processor (rev 03)
	Subsystem: Hewlett-Packard Company Unknown device 3305
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 120, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at 1400 [size=256]
	Region 1: Memory at f7fd0000 (32-bit, non-prefetchable) [size=2K]
	Region 2: Memory at f7fc0000 (32-bit, non-prefetchable) [size=8K]
	Region 3: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
	[virtual] Expansion ROM at f7e20000 [disabled] [size=64K]
	Capabilities: [f0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:04.4 USB Controller: Hewlett-Packard Company Unknown device 3300 (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Unknown device 3305
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 120
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at 1800 [size=32]
	Capabilities: [f0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:04.6 Class 0c07: Hewlett-Packard Company Unknown device 3302 (prog-if 01)
	Subsystem: Hewlett-Packard Company Unknown device 3305
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f7ef0000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [f0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=120
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: f8000000-f9ffffff
	Prefetchable memory behind bridge: 0000000090000000-0000000090000000
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s <64ns, L1 <1us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0
		Link: Latency L0s <4us, L1 <4us
		Link: ASPM Disabled CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
	Capabilities: [90] PCI-X bridge device
		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
		Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
		Upstream: Capacity=0 CommitmentLimit=0
		Downstream: Capacity=0 CommitmentLimit=0
	Capabilities: [b0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [14c] Power Budgeting
	Capabilities: [160] Device Serial Number f6-26-35-fe-ff-fe-18-00

03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12)
	Subsystem: Hewlett-Packard Company NC373i Integrated Multifunction Gigabit Server Adapter
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 120 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 55
	Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
	[virtual] Expansion ROM at 90000000 [disabled] [size=128K]
	Capabilities: [40] PCI-X non-bridge device
		Command: DPERE- ERO- RBC=512 OST=8
		Status: Dev=03:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz-
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
		Address: 00000000fee0100c  Data: 4199

04:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=04, secondary=05, subordinate=05, sec-latency=120
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fa000000-fbffffff
	Prefetchable memory behind bridge: 0000000090100000-0000000090100000
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s <64ns, L1 <1us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0
		Link: Latency L0s <4us, L1 <4us
		Link: ASPM Disabled CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
	Capabilities: [90] PCI-X bridge device
		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
		Status: Dev=04:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
		Upstream: Capacity=0 CommitmentLimit=0
		Downstream: Capacity=0 CommitmentLimit=0
	Capabilities: [b0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [14c] Power Budgeting
	Capabilities: [160] Device Serial Number f4-26-35-fe-ff-fe-18-00

05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12)
	Subsystem: Hewlett-Packard Company NC373i Integrated Multifunction Gigabit Server Adapter
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 120 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
	[virtual] Expansion ROM at 90100000 [disabled] [size=128K]
	Capabilities: [40] PCI-X non-bridge device
		Command: DPERE- ERO- RBC=512 OST=8
		Status: Dev=05:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz-
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
		Address: e8b6fbf7c5727bdc  Data: 8df5

06:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=06, secondary=07, subordinate=07, sec-latency=120
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fdc00000-fdcfffff
	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s <4us, L1 <16us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0
		Link: Latency L0s <4us, L1 <4us
		Link: ASPM Disabled CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
	Capabilities: [90] PCI-X bridge device
		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
		Status: Dev=06:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
		Upstream: Capacity=0 CommitmentLimit=0
		Downstream: Capacity=0 CommitmentLimit=0
	Capabilities: [b0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [14c] Power Budgeting

07:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5715S Gigabit Ethernet (rev a3)
	Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 120 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at fdcf0000 (64-bit, non-prefetchable) [size=64K]
	Region 2: Memory at fdce0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] PCI-X non-bridge device
		Command: DPERE- ERO+ RBC=512 OST=1
		Status: Dev=07:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
		Address: feff8bfddff5bae4  Data: eff7

07:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5715S Gigabit Ethernet (rev a3)
	Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 120 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 16
	Region 0: Memory at fdcd0000 (64-bit, non-prefetchable) [size=64K]
	Region 2: Memory at fdcc0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] PCI-X non-bridge device
		Command: DPERE- ERO+ RBC=512 OST=1
		Status: Dev=07:04.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
		Address: 90bc6af01d6104c0  Data: 5f00

08:00.0 Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter (rev 02)
	Subsystem: Hewlett-Packard Company Unknown device 1708
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 57
	Region 0: Memory at fddf0000 (64-bit, non-prefetchable) [size=4K]
	Region 2: Memory at fdde0000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 3000 [size=256]
	[virtual] Expansion ROM at 90200000 [disabled] [size=256K]
	Capabilities: [58] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/4 Enable+
		Address: 00000000fee0800c  Data: 41b9
	Capabilities: [44] Express Endpoint IRQ 0
		Device: Supported: MaxPayload 2048 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s <4us, L1 <16us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
		Link: Latency L0s <4us, L1 unlimited
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [12c] Power Budgeting

08:00.1 Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter (rev 02)
	Subsystem: Hewlett-Packard Company Unknown device 1708
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 58
	Region 0: Memory at fddd0000 (64-bit, non-prefetchable) [size=4K]
	Region 2: Memory at fddc0000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 3400 [size=256]
	[virtual] Expansion ROM at 90240000 [disabled] [size=256K]
	Capabilities: [58] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/4 Enable+
		Address: 00000000fee0200c  Data: 41c9
	Capabilities: [44] Express Endpoint IRQ 0
		Device: Supported: MaxPayload 2048 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s <4us, L1 <16us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
		Link: Latency L0s <4us, L1 unlimited
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [12c] Power Budgeting

40:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [44] HyperTransport: Slave or Primary Interface
		Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
		Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
		Revision ID: 1.03
		Link Frequency 0: 1.0GHz
		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
		Link Frequency 1: 200MHz
		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
		Prefetchable memory behind bridge Upper: 00-00
		Bus Number: 00
	Capabilities: [e0] HyperTransport: MSI Mapping

40:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev b1)
	Subsystem: nVidia Corporation Unknown device cb84
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Region 1: Memory at fdef0000 (32-bit, non-prefetchable) [size=4K]

40:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=40, secondary=41, subordinate=43, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: fdf00000-fdffffff
	Prefetchable memory behind bridge: 0000000084000000-0000000084000000
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0f00c  Data: 4169
	Capabilities: [58] HyperTransport: MSI Mapping
	Capabilities: [80] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <512ns, L1 <4us
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 2
		Link: Latency L0s <512ns, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 4, PowerLimit 25.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd On, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [160] Advanced Error Reporting

40:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=40, secondary=44, subordinate=46, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0f00c  Data: 4171
	Capabilities: [58] HyperTransport: MSI Mapping
	Capabilities: [80] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <512ns, L1 <4us
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 1
		Link: Latency L0s <512ns, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x8
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 2, PowerLimit 25.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd On, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [160] Advanced Error Reporting

40:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=40, secondary=47, subordinate=49, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0f00c  Data: 4179
	Capabilities: [58] HyperTransport: MSI Mapping
	Capabilities: [80] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <512ns, L1 <4us
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
		Link: Latency L0s <512ns, L1 <4us
		Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x16
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 1, PowerLimit 25.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd On, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [160] Advanced Error Reporting

41:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=41, secondary=42, subordinate=43, sec-latency=120
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: fdf00000-fdffffff
	Prefetchable memory behind bridge: 0000000084000000-0000000084000000
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s <4us, L1 <16us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0
		Link: Latency L0s <4us, L1 <4us
		Link: ASPM Disabled CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
	Capabilities: [90] PCI-X bridge device
		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
		Status: Dev=41:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
		Upstream: Capacity=0 CommitmentLimit=0
		Downstream: Capacity=0 CommitmentLimit=0
	Capabilities: [b0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [14c] Power Budgeting

42:04.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (rev b2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 120, Cache Line Size: 64 bytes
	Bus: primary=42, secondary=43, subordinate=43, sec-latency=120
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [90] PCI-X bridge device
		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
		Status: Dev=42:04.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
		Upstream: Capacity=8 CommitmentLimit=8
		Downstream: Capacity=8 CommitmentLimit=8

42:08.0 RAID bus controller: Hewlett-Packard Company Unknown device 3238
	Subsystem: Hewlett-Packard Company Unknown device 3211
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 120
	Interrupt: pin A routed to IRQ 56
	Region 0: Memory at fdf80000 (64-bit, non-prefetchable) [size=512K]
	Region 2: I/O ports at 4000 [size=256]
	Region 3: Memory at fdf70000 (32-bit, non-prefetchable) [size=32K]
	[virtual] Expansion ROM at 84000000 [disabled] [size=16K]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [cc] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0200c  Data: 41b1
	Capabilities: [dc] PCI-X non-bridge device
		Command: DPERE- ERO- RBC=512 OST=1
		Status: Dev=42:08.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=4096 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-

========== lsusb: ==========
Bus 001 Device 001: ID 1d6b:0001  
Bus 001 Device 002: ID 03f0:1027 Hewlett-Packard 
Bus 001 Device 003: ID 03f0:1327 Hewlett-Packard 
Bus 002 Device 001: ID 1d6b:0001  
Bus 003 Device 001: ID 1d6b:0002  
========== env: ==========
HOSTNAME=ca-ostest293.us.oracle.com
SHELL=/bin/sh
HISTSIZE=1000
USER=root
LS_COLORS=
MAIL=/var/spool/mail/root
PATH=/cruc/usr/bin:/sbin:/usr/sbin:/cruc/usr/bin:/sbin:/usr/sbin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/bin:/bin:/root/bin:/cruc/usr/bin:/cruc/usr/bin:/cruc/usr/bin:/sbin:/usr/sbin
INPUTRC=/etc/inputrc
PWD=/cruc/runs/5813
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HOME=/root
SHLVL=4
LOGNAME=root
CVS_RSH=ssh
LESSOPEN=|/usr/bin/lesspipe.sh %s
G_BROKEN_FILENAMES=1
_=/usr/bin/env
========== ps auxw: ==========
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root         1  0.0  0.0  10312   496 ?        Ss   09:46   0:01 init [3]                                                                                                                                                                                              
root         2  0.0  0.0      0     0 ?        S<   09:46   0:00 [kthreadd]
root         3  0.0  0.0      0     0 ?        S<   09:46   0:00 [migration/0]
root         4  0.0  0.0      0     0 ?        S<   09:46   0:00 [ksoftirqd/0]
root         5  0.0  0.0      0     0 ?        S<   09:46   0:00 [watchdog/0]
root         6  0.0  0.0      0     0 ?        S<   09:46   0:00 [migration/1]
root         7  0.0  0.0      0     0 ?        S<   09:46   0:00 [ksoftirqd/1]
root         8  0.0  0.0      0     0 ?        S<   09:46   0:00 [watchdog/1]
root         9  0.0  0.0      0     0 ?        S<   09:46   0:00 [migration/2]
root        10  0.0  0.0      0     0 ?        S<   09:46   0:00 [ksoftirqd/2]
root        11  0.0  0.0      0     0 ?        S<   09:46   0:00 [watchdog/2]
root        12  0.0  0.0      0     0 ?        S<   09:46   0:00 [migration/3]
root        13  0.0  0.0      0     0 ?        S<   09:46   0:00 [ksoftirqd/3]
root        14  0.0  0.0      0     0 ?        S<   09:46   0:00 [watchdog/3]
root        15  0.0  0.0      0     0 ?        S<   09:46   0:00 [events/0]
root        16  0.0  0.0      0     0 ?        S<   09:46   0:00 [events/1]
root        17  0.0  0.0      0     0 ?        S<   09:46   0:00 [events/2]
root        18  0.0  0.0      0     0 ?        S<   09:46   0:00 [events/3]
root        19  0.0  0.0      0     0 ?        S<   09:46   0:00 [work_on_cpu/0]
root        20  0.0  0.0      0     0 ?        S<   09:46   0:00 [work_on_cpu/1]
root        21  0.0  0.0      0     0 ?        S<   09:46   0:00 [work_on_cpu/2]
root        22  0.0  0.0      0     0 ?        S<   09:46   0:00 [work_on_cpu/3]
root        23  0.0  0.0      0     0 ?        S<   09:46   0:00 [khelper]
root       147  0.0  0.0      0     0 ?        S<   09:46   0:00 [kblockd/0]
root       148  0.0  0.0      0     0 ?        S<   09:46   0:00 [kblockd/1]
root       149  0.0  0.0      0     0 ?        S<   09:46   0:00 [kblockd/2]
root       150  0.0  0.0      0     0 ?        S<   09:46   0:00 [kblockd/3]
root       152  0.0  0.0      0     0 ?        S<   09:46   0:00 [kacpid]
root       153  0.0  0.0      0     0 ?        S<   09:46   0:00 [kacpi_notify]
root       256  0.0  0.0      0     0 ?        S<   09:46   0:00 [cqueue]
root       263  0.0  0.0      0     0 ?        S<   09:46   0:00 [ksuspend_usbd]
root       269  0.0  0.0      0     0 ?        S<   09:46   0:00 [khubd]
root       272  0.0  0.0      0     0 ?        S<   09:46   0:00 [kseriod]
root       358  0.0  0.0      0     0 ?        S<   09:46   0:03 [kswapd0]
root       359  0.0  0.0      0     0 ?        S<   09:46   0:04 [kswapd1]
root       407  0.0  0.0      0     0 ?        S<   09:46   0:00 [aio/0]
root       408  0.0  0.0      0     0 ?        S<   09:46   0:00 [aio/1]
root       409  0.0  0.0      0     0 ?        S<   09:46   0:00 [aio/2]
root       410  0.0  0.0      0     0 ?        S<   09:46   0:00 [aio/3]
root       424  0.0  0.0      0     0 ?        S<   09:46   0:00 [nfsiod]
root       564  0.0  0.0      0     0 ?        SN   09:46   0:00 [kipmi0]
root       620  0.0  0.0      0     0 ?        S<   09:46   0:00 [scsi_tgtd/0]
root       621  0.0  0.0      0     0 ?        S<   09:46   0:00 [scsi_tgtd/1]
root       622  0.0  0.0      0     0 ?        S<   09:46   0:00 [scsi_tgtd/2]
root       623  0.0  0.0      0     0 ?        S<   09:46   0:00 [scsi_tgtd/3]
root       637  0.0  0.0      0     0 ?        S<   09:46   0:00 [iscsi_eh]
root       659  0.0  0.0      0     0 ?        S<   09:46   0:00 [kpsmoused]
root       684  0.0  0.0      0     0 ?        S<   09:46   0:00 [edac-poller]
root       689  0.0  0.0      0     0 ?        S<   09:46   0:00 [kondemand/0]
root       690  0.0  0.0      0     0 ?        S<   09:46   0:00 [kondemand/1]
root       691  0.0  0.0      0     0 ?        S<   09:46   0:00 [kondemand/2]
root       692  0.0  0.0      0     0 ?        S<   09:46   0:00 [kondemand/3]
root       694  0.0  0.0      0     0 ?        S<   09:46   0:00 [hid_compat]
root       703  0.0  0.0      0     0 ?        S<   09:46   0:00 [rpciod/0]
root       704  0.0  0.0      0     0 ?        S<   09:46   0:00 [rpciod/1]
root       705  0.0  0.0      0     0 ?        S<   09:46   0:00 [rpciod/2]
root       706  0.0  0.0      0     0 ?        S<   09:46   0:00 [rpciod/3]
root       738  0.0  0.0      0     0 ?        S<   09:47   0:08 [kjournald]
root       770  0.0  0.0      0     0 ?        S<   09:47   0:00 [kauditd]
root       804  0.0  0.0  12596   412 ?        S<s  09:47   0:00 /sbin/udevd -d
root      1439  0.0  0.0      0     0 ?        S<   09:47   0:00 [lpfc_worker_0]
root      1446  0.0  0.0      0     0 ?        S<   09:47   0:00 [scsi_eh_0]
root      1457  0.0  0.0      0     0 ?        S<   09:47   0:00 [scsi_wq_0]
root      1467  0.0  0.0      0     0 ?        S<   09:47   0:00 [fc_wq_0]
root      1468  0.0  0.0      0     0 ?        S<   09:47   0:00 [fc_dl_0]
root      2169  0.0  0.0      0     0 ?        S<   09:47   0:00 [lpfc_worker_1]
root      2170  0.0  0.0      0     0 ?        S<   09:47   0:00 [scsi_eh_1]
root      2172  0.0  0.0      0     0 ?        S<   09:47   0:00 [scsi_wq_1]
root      2173  0.0  0.0      0     0 ?        S<   09:47   0:00 [fc_wq_1]
root      2174  0.0  0.0      0     0 ?        S<   09:47   0:00 [fc_dl_1]
root      2543  0.0  0.0      0     0 ?        S<   09:47   0:00 [kjournald]
root      2544  0.0  0.0      0     0 ?        S<   09:47   0:00 [kjournald]
root      2554  0.0  0.0      0     0 ?        S<   09:47   0:00 [kjournald]
root      2559  0.0  0.0      0     0 ?        S<   09:47   0:00 [kjournald]
root      3126  0.0  0.0  79720   576 ?        S<sl 09:47   0:00 auditd
root      3128  0.0  0.0 116176  1468 ?        S<s  09:47   0:00 python /sbin/audispd
root      3149  0.0  0.0   5872   532 ?        Ss   09:47   0:00 syslogd -m 0
root      3152  0.0  0.0   3768   388 ?        Ss   09:47   0:00 klogd -x
root      3169  0.0  0.0   3824   320 ?        Ss   09:47   0:00 irqbalance
rpc       3206  0.0  0.0   8008   440 ?        Ss   09:47   0:00 portmap
root      3245  0.0  0.0   8012   576 ?        Ss   09:47   0:00 rpc.statd
dbus      3307  0.0  0.0  21220   572 ?        Ss   09:47   0:00 dbus-daemon --system
root      3365  0.0  0.0      0     0 ?        S<   09:47   0:00 [lockd]
root      3415  0.0  0.0  18948   532 ?        Ssl  09:47   0:01 pcscd
root      3467  0.0  0.0   3768   436 ?        Ss   09:47   0:00 /usr/sbin/acpid
root      3483  0.0  0.0 125972   616 ?        Ss   09:47   0:00 cupsd
root      3504  0.0  0.0  44288   364 ?        Ss   09:47   0:00 /usr/sbin/sshd
ntp       3525  0.0  0.0  15704  3476 ?        SLs  09:47   0:00 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g
root      3556  0.0  0.0  60224   668 ?        Ss   09:47   0:00 sendmail: accepting connections
smmsp     3566  0.0  0.0  50976   608 ?        Ss   09:47   0:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue
root      3582  0.0  0.0   6416   240 ?        Ss   09:47   0:00 gpm -m /dev/input/mice -t exps2
root      3599  0.0  0.0  73924   552 ?        Ss   09:47   0:00 crond
xfs       3637  0.0  0.0  20924   556 ?        Ss   09:47   0:00 xfs -droppriv -daemon
root      4650  0.0  0.0 101072   484 ?        S    09:48   0:00 crond
root      4651  0.0  0.0   8648   488 ?        Ss   09:48   0:00 /bin/sh -c pgrep sut_dispatcher>/dev/null 2>&1 || /cruc/usr/bin/sut_dispatcher >/cruc/suts/ca-ostest293/sut.log 2>&1
root      4653  0.0  0.0  64108  1028 ?        S    09:48   0:00 /bin/bash -l /cruc/usr/bin/sut_dispatcher
root      4880  0.0  0.0  18672   324 ?        Ss   09:48   0:00 /usr/sbin/atd
root      4898  0.0  0.0  58024   276 ?        Ss   09:48   0:00 rhnsd --interval 240
root      4943  0.0  0.5 269368 46044 ?        S    09:48   0:10 /usr/bin/python /usr/sbin/yum-updatesd
avahi     4968  0.0  0.0  23216   872 ?        Ss   09:48   0:00 avahi-daemon: running [ca-ostest293.local]
avahi     4969  0.0  0.0  23092   120 ?        Ss   09:48   0:00 avahi-daemon: chroot helper
68        4998  0.0  0.0  31408  1604 ?        Ss   09:48   0:01 hald
root      4999  0.0  0.0  21628   472 ?        S    09:48   0:00 hald-runner
68        5013  0.0  0.0  12272   520 ?        S    09:48   0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
root      5014  0.0  0.0  23724   468 ?        S    09:48   0:00 /usr/libexec/hald-addon-cpufreq
68        5022  0.0  0.0  12272   524 ?        S    09:48   0:00 hald-addon-keyboard: listening on /dev/input/event0
68        5025  0.0  0.0  12272   524 ?        S    09:48   0:00 hald-addon-keyboard: listening on /dev/input/event2
root      5130  0.0  0.0   4044   260 ?        S    09:48   0:00 /usr/sbin/smartd -q never
root      5134  0.0  0.0   3756   372 tty1     Ss+  09:48   0:00 /sbin/mingetty tty1
root      5135  0.0  0.0   3756   372 tty2     Ss+  09:48   0:00 /sbin/mingetty tty2
root      5136  0.0  0.0   3756   372 tty3     Ss+  09:48   0:00 /sbin/mingetty tty3
root      5137  0.0  0.0   3756   372 tty4     Ss+  09:48   0:00 /sbin/mingetty tty4
root      5138  0.0  0.0   3756   372 tty5     Ss+  09:48   0:00 /sbin/mingetty tty5
root      5139  0.0  0.0   3756   372 tty6     Ss+  09:48   0:00 /sbin/mingetty tty6
root     24752  0.0  0.0      0     0 ?        S    12:54   0:00 [pdflush]
root     24754  0.0  0.0      0     0 ?        S    12:54   0:00 [pdflush]
root     29234  0.0  0.0  63976  1160 ?        S    13:05   0:00 /bin/bash /cruc/runs/5813/RUNNING/ca-ostest293/310-save_sysinfo
root     29238  0.0  0.0  63976  1084 ?        S    13:05   0:00 /bin/bash /cruc/usr/bin/sut_sysinfo
root     29249  0.0  0.0  65744   972 ?        R    13:05   0:00 ps auxw
========== chkconfig -l: ==========
-l: unknown option
========== ifconfig: ==========
eth0      Link encap:Ethernet  HWaddr 00:18:FE:35:26:F6  
          inet addr:139.185.50.77  Bcast:139.185.51.255  Mask:255.255.252.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:414678 errors:0 dropped:0 overruns:0 frame:0
          TX packets:305110 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:406734156 (387.8 MiB)  TX bytes:164580065 (156.9 MiB)
          Interrupt:17 Memory:f8000000-f8012700 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:48 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:3832 (3.7 KiB)  TX bytes:3832 (3.7 KiB)

========== showmount: ==========
mount clntudp_create: RPC: Program not registered
========== rpcinfo -p: ==========
   program vers proto   port
    100000    2   tcp    111  portmapper
    100000    2   udp    111  portmapper
    100024    1   udp    880  status
    100024    1   tcp    883  status
    100021    1   udp  21970  nlockmgr
    100021    3   udp  21970  nlockmgr
    100021    4   udp  21970  nlockmgr
    100021    1   tcp  61047  nlockmgr
    100021    3   tcp  61047  nlockmgr
    100021    4   tcp  61047  nlockmgr
========== exportfs -v: ==========
========== netstat: ==========
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address               Foreign Address             State      
tcp        0      0 ca-ostest293.us.oracle:7610 ca-fileserver3.us.or:sunrpc TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracl:20254 ca-fileserver3.us:acp-proto TIME_WAIT   
tcp        0      0 ca-ostest293:msexch-routing ca-fileserver3.us.oracl:nfs TIME_WAIT   
tcp        0      0 localhost.localdomain:1021  localhost.localdomai:sunrpc TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracl:59554 ca-fileserver3.us.or:sunrpc TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracle:5441 ca-fileserver3.us.or:sunrpc TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracle.:708 ca-fileserver3.us:acp-proto TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracle.:981 ca-fileserver3.us:acp-proto TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracl:18631 ca-fileserver3.us.or:sunrpc TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracl:51871 ca-fileserver3.us.oracl:nfs TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracl:56757 ca-fileserver3.us.oracl:nfs TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracl:49946 ca-fileserver3.us:acp-proto TIME_WAIT   
tcp        0      0 ca-ostest293:sco-websrvrmgr ca-fileserver3.us:acp-proto TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracl:53157 ca-ostest293.us.orac:sunrpc TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracl:30307 ca-fileserver3.us:acp-proto TIME_WAIT   
tcp        0      0 ca-ostest293:viziblebrowser ca-fileserver3.us:acp-proto TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracl:24783 ca-fileserver3.us.or:sunrpc TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracle.:980 ca-fileserver3.us.oracl:nfs TIME_WAIT   
tcp        0      0 ca-ostest293.us.oracle.:743 ca-ostest292.us.oracle.:nfs ESTABLISHED 
tcp        0      0 ca-ostest293.us.oracl:15407 ca-fileserver3.us.or:sunrpc TIME_WAIT   
tcp        0      0 ca-ostest293.us.or:mcns-sec ca-fileserver3.us:acp-proto TIME_WAIT   
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags       Type       State         I-Node Path
unix  14     [ ]         DGRAM                    6475   /dev/log
unix  2      [ ]         DGRAM                    604    @/org/kernel/udev/udevd
unix  2      [ ]         DGRAM                    9828   @/org/freedesktop/hal/udev_event
unix  3      [ ]         STREAM     CONNECTED     9984   /var/run/dbus/system_bus_socket
unix  3      [ ]         STREAM     CONNECTED     9983   
unix  3      [ ]         STREAM     CONNECTED     9906   @/var/run/hald/dbus-IE7N5BCUGs
unix  3      [ ]         STREAM     CONNECTED     9903   
unix  3      [ ]         STREAM     CONNECTED     9890   @/var/run/hald/dbus-IE7N5BCUGs
unix  3      [ ]         STREAM     CONNECTED     9887   
unix  3      [ ]         STREAM     CONNECTED     9865   /var/run/acpid.socket
unix  3      [ ]         STREAM     CONNECTED     9864   
unix  3      [ ]         STREAM     CONNECTED     9857   @/var/run/hald/dbus-IE7N5BCUGs
unix  3      [ ]         STREAM     CONNECTED     9855   
unix  3      [ ]         STREAM     CONNECTED     9856   @/var/run/hald/dbus-IE7N5BCUGs
unix  3      [ ]         STREAM     CONNECTED     9853   
unix  3      [ ]         STREAM     CONNECTED     9823   @/var/run/hald/dbus-9lw048kGoq
unix  3      [ ]         STREAM     CONNECTED     9822   
unix  3      [ ]         STREAM     CONNECTED     9766   /var/run/dbus/system_bus_socket
unix  3      [ ]         STREAM     CONNECTED     9765   
unix  3      [ ]         STREAM     CONNECTED     9758   
unix  3      [ ]         STREAM     CONNECTED     9757   
unix  2      [ ]         DGRAM                    9755   
unix  3      [ ]         STREAM     CONNECTED     9720   /var/run/dbus/system_bus_socket
unix  3      [ ]         STREAM     CONNECTED     9719   
unix  2      [ ]         DGRAM                    9694   
unix  2      [ ]         DGRAM                    9642   
unix  2      [ ]         DGRAM                    7601   
unix  2      [ ]         DGRAM                    7560   
unix  2      [ ]         DGRAM                    7524   
unix  2      [ ]         DGRAM                    7491   
unix  2      [ ]         DGRAM                    7463   
unix  2      [ ]         DGRAM                    7157   
unix  3      [ ]         STREAM     CONNECTED     6843   
unix  3      [ ]         STREAM     CONNECTED     6842   
unix  2      [ ]         DGRAM                    6692   
unix  2      [ ]         DGRAM                    6664   
unix  2      [ ]         DGRAM                    6483   
unix  3      [ ]         STREAM     CONNECTED     6433   
unix  3      [ ]         STREAM     CONNECTED     6432   
========== nfsstat: ==========
Server rpc stats:
calls      badcalls   badauth    badclnt    xdrcall
0          0          0          0          0       

Client rpc stats:
calls      retrans    authrefrsh
74379      0          0       

Client nfs v3:
null         getattr      setattr      lookup       access       readlink     
0         0% 6507      8% 543       0% 5007      6% 2270      3% 0         0% 
read         write        create       mkdir        symlink      mknod        
11349    15% 23101    31% 1066      1% 6         0% 0         0% 0         0% 
remove       rmdir        rename       link         readdir      readdirplus  
900       1% 1         0% 2758      3% 0         0% 80        0% 130       0% 
fsstat       fsinfo       pathconf     commit       
163       0% 18        0% 0         0% 20477    27% 

========== dmesg -s 1000000: ==========
Linux version 2.6.29-rc4-git1 (root@ca-ostest293.us.oracle.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Sun Feb 8 17:45:35 PST 2009
Command line: root=LABEL=/ selinux=0 console=tty0 hcheck_dump_tasks=1 netconsole=55813@139.185.50.77/eth0,55813@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 debug ignore_loglevel initcall_debug 3 kex
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000100 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fe50000 (usable)
 BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data)
 BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000027ffff000 (usable)
debug: ignoring loglevel setting.
DMI 2.3 present.
last_pfn = 0x27ffff max_arch_pfn = 0x100000000
last_pfn = 0x7fe50 max_arch_pfn = 0x100000000
init_memory_mapping: 0000000000000000-000000007fe50000
 0000000000 - 007fe00000 page 2M
 007fe00000 - 007fe50000 page 4k
kernel direct mapping tables up to 7fe50000 @ 8000-c000
last_map_addr: 7fe50000 end: 7fe50000
init_memory_mapping: 0000000100000000-000000027ffff000
 0100000000 - 027fe00000 page 2M
 027fe00000 - 027ffff000 page 4k
kernel direct mapping tables up to 27ffff000 @ a000-16000
last_map_addr: 27ffff000 end: 27ffff000
RAMDISK: 7fd04000 - 7fe4f177
ACPI: RSDP 000F4F00, 0024 (r2 HP    )
ACPI: XSDT 7FE50780, 005C (r1 HP     A08             2   Ò     162E)
ACPI: FACP 7FE50800, 00F4 (r3 HP     A08             2   Ò     162E)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7FE50900, 3F75 (r1 HP         DSDT        1 INTL 20030228)
ACPI: FACS 7FE50100, 0040
ACPI: SPCR 7FE50140, 0050 (r1 HP     SPCRRBSU        1   Ò     162E)
ACPI: MCFG 7FE501C0, 003C (r1 HP     ProLiant        1             0)
ACPI: HPET 7FE50200, 0038 (r1 HP     A08             2   Ò     162E)
ACPI: SPMI 7FE50240, 0040 (r5 HP     ProLiant        1   Ò     162E)
ACPI: APIC 7FE50280, 00DE (r1 HP     00000083        2             0)
ACPI: SRAT 7FE50380, 0110 (r1 AMD    HAMMER          1 AMD         1)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-80000000
SRAT: Node 0 PXM 0 100000000-180000000
SRAT: Node 1 PXM 1 180000000-280000000
NUMA: Allocated memnodemap from 11000 - 16080
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000180000000
  NODE_DATA [0000000000001000 - 0000000000004fff]
  bootmap [0000000000017000 -  0000000000046fff] pages 30
(8 early reservations) ==> bootmem [0000000000 - 0180000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 00008f7a94]    TEXT DATA BSS ==> [0000200000 - 00008f7a94]
  #3 [007fd04000 - 007fe4f177]          RAMDISK ==> [007fd04000 - 007fe4f177]
  #4 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
  #6 [000000a000 - 0000011000]          PGTABLE ==> [000000a000 - 0000011000]
  #7 [0000011000 - 0000016080]       MEMNODEMAP ==> [0000011000 - 0000016080]
Bootmem setup node 1 0000000180000000-000000027ffff000
  NODE_DATA [0000000180000000 - 0000000180003fff]
  bootmap [0000000180004000 -  0000000180023fff] pages 20
(8 early reservations) ==> bootmem [0180000000 - 027ffff000]
  #0 [0000000000 - 0000001000]   BIOS data page
  #1 [0000006000 - 0000008000]       TRAMPOLINE
  #2 [0000200000 - 00008f7a94]    TEXT DATA BSS
  #3 [007fd04000 - 007fe4f177]          RAMDISK
  #4 [000009f400 - 0000100000]    BIOS reserved
  #5 [0000008000 - 000000a000]          PGTABLE
  #6 [000000a000 - 0000011000]          PGTABLE
  #7 [0000011000 - 0000016080]       MEMNODEMAP
found SMP MP-table at [ffff8800000f4f80] 000f4f80
 [ffffe20000000000-ffffe200053fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
 [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x0027ffff
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x0007fe50
    0: 0x00100000 -> 0x00180000
    1: 0x00180000 -> 0x0027ffff
On node 0 totalpages: 1048046
  DMA zone: 56 pages used for memmap
  DMA zone: 1898 pages reserved
  DMA zone: 2044 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 505480 pages, LIFO batch:31
  Normal zone: 7168 pages used for memmap
  Normal zone: 517120 pages, LIFO batch:31
On node 1 totalpages: 1048575
  Normal zone: 14336 pages used for memmap
  Normal zone: 1034239 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xf7df0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38])
IOAPIC[1]: apic_id 9, version 0, address 0xfdef0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000
PM: Registered nosave memory: 000000007fe58000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:2
PERCPU: Allocating 49152 bytes of per cpu data
Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 2058883
Policy zone: Normal
Kernel command line: root=LABEL=/ selinux=0 console=tty0 hcheck_dump_tasks=1 netconsole=55813@139.185.50.77/eth0,55813@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 debug ignore_loglevel initcall_debug 3 kex
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1004.594 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Node 0: aperture @ c000000 size 64 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 8197108k/10485756k available (3654k kernel code, 2099272k absent, 189376k reserved, 1894k data, 440k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 2009.18 BogoMIPS (lpj=4018376)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20081204
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
calling  migration_init+0x0/0x5b @ 1
initcall migration_init+0x0/0x5b returned 1 after 0 usecs
initcall migration_init+0x0/0x5b returned with error code 1 
calling  spawn_ksoftirqd+0x0/0x58 @ 1
initcall spawn_ksoftirqd+0x0/0x58 returned 0 after 0 usecs
calling  init_call_single_data+0x0/0x5f @ 1
initcall init_call_single_data+0x0/0x5f returned 0 after 0 usecs
calling  spawn_softlockup_task+0x0/0x74 @ 1
initcall spawn_softlockup_task+0x0/0x74 returned 0 after 0 usecs
calling  relay_init+0x0/0x14 @ 1
initcall relay_init+0x0/0x14 returned 0 after 0 usecs
calling  tracer_alloc_buffers+0x0/0x156 @ 1
initcall tracer_alloc_buffers+0x0/0x156 returned 0 after 3906 usecs
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
spurious APIC interrupt on CPU#1, should never happen.
Calibrating delay using timer specific routine.. 2009.14 BogoMIPS (lpj=4018294)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Booting processor 2 APIC 0x1 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 2009.24 BogoMIPS (lpj=4018497)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
spurious APIC interrupt on CPU#3, should never happen.
Calibrating delay using timer specific routine.. 2009.15 BogoMIPS (lpj=4018302)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/0x3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Brought up 4 CPUs
Total of 4 processors activated (8036.73 BogoMIPS).
Testing NMI watchdog ... OK.
khelper used greatest stack depth: 6016 bytes left
calling  init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
calling  net_ns_init+0x0/0x14d @ 1
net_namespace: 1008 bytes
initcall net_ns_init+0x0/0x14d returned 0 after 0 usecs
calling  e820_mark_nvs_memory+0x0/0x41 @ 1
initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs
calling  cpufreq_tsc+0x0/0x28 @ 1
initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
calling  init_smp_flush+0x0/0x59 @ 1
initcall init_smp_flush+0x0/0x59 returned 0 after 0 usecs
calling  alloc_frozen_cpus+0x0/0x8 @ 1
initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs
calling  sysctl_init+0x0/0x16 @ 1
initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs
calling  ksysfs_init+0x0/0xbb @ 1
initcall ksysfs_init+0x0/0xbb returned 0 after 0 usecs
calling  async_init+0x0/0x44 @ 1
initcall async_init+0x0/0x44 returned 0 after 0 usecs
calling  init_jiffies_clocksource+0x0/0x12 @ 1
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
calling  pm_init+0x0/0x34 @ 1
initcall pm_init+0x0/0x34 returned 0 after 0 usecs
calling  pm_disk_init+0x0/0x19 @ 1
initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
calling  swsusp_header_init+0x0/0x2c @ 1
initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs
calling  filelock_init+0x0/0x2e @ 1
initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
calling  init_misc_binfmt+0x0/0x3f @ 1
initcall init_misc_binfmt+0x0/0x3f returned 0 after 0 usecs
calling  init_script_binfmt+0x0/0x12 @ 1
initcall init_script_binfmt+0x0/0x12 returned 0 after 0 usecs
calling  init_elf_binfmt+0x0/0x12 @ 1
initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 usecs
calling  init_compat_elf_binfmt+0x0/0x12 @ 1
initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 usecs
calling  debugfs_init+0x0/0x51 @ 1
initcall debugfs_init+0x0/0x51 returned 0 after 0 usecs
calling  random32_init+0x0/0xe5 @ 1
initcall random32_init+0x0/0xe5 returned 0 after 0 usecs
calling  cpufreq_core_init+0x0/0x84 @ 1
initcall cpufreq_core_init+0x0/0x84 returned 0 after 0 usecs
calling  cpuidle_init+0x0/0x40 @ 1
initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs
calling  sock_init+0x0/0x59 @ 1
initcall sock_init+0x0/0x59 returned 0 after 0 usecs
calling  netpoll_init+0x0/0x31 @ 1
initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
calling  netlink_proto_init+0x0/0x14d @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x14d returned 0 after 0 usecs
calling  bdi_class_init+0x0/0x41 @ 1
initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
calling  kobject_uevent_init+0x0/0x45 @ 1
initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 usecs
calling  pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
calling  pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
calling  backlight_class_init+0x0/0x5d @ 1
initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
calling  tty_class_init+0x0/0x31 @ 1
initcall tty_class_init+0x0/0x31 returned 0 after 0 usecs
calling  vtconsole_class_init+0x0/0xc2 @ 1
initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs
calling  register_node_type+0x0/0x6b @ 1
initcall register_node_type+0x0/0x6b returned 0 after 0 usecs
calling  i2c_init+0x0/0x66 @ 1
initcall i2c_init+0x0/0x66 returned 0 after 0 usecs
calling  amd_postcore_init+0x0/0x86c @ 1
node 0 link 1: io port [1000, 3fff]
node 1 link 2: io port [4000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 1: mmio [e8000000, fddfffff]
node 1 link 2: mmio [fde00000, fdffffff]
node 0 link 1: mmio [80000000, 83ffffff]
node 1 link 2: mmio [84000000, 8fffffff]
node 0 link 1: mmio [a0000, bffff]
TOM2: 0000000280000000 aka 10240M
bus: [00,3f] on node 0 link 1
bus: 00 index 0 io port: [0, 3fff]
bus: 00 index 1 mmio: [90000000, fddfffff]
bus: 00 index 2 mmio: [80000000, 83ffffff]
bus: 00 index 3 mmio: [a0000, bffff]
bus: 00 index 4 mmio: [fe000000, ffffffff]
bus: 00 index 5 mmio: [280000000, fcffffffff]
bus: [40,ff] on node 1 link 2
bus: 40 index 0 io port: [4000, ffff]
bus: 40 index 1 mmio: [fde00000, fdffffff]
bus: 40 index 2 mmio: [84000000, 8fffffff]
initcall amd_postcore_init+0x0/0x86c returned 0 after 3906 usecs
calling  arch_kdebugfs_init+0x0/0x24 @ 1
initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs
calling  mtrr_if_init+0x0/0x77 @ 1
initcall mtrr_if_init+0x0/0x77 returned 0 after 0 usecs
calling  ffh_cstate_init+0x0/0x31 @ 1
initcall ffh_cstate_init+0x0/0x31 returned -1 after 0 usecs
initcall ffh_cstate_init+0x0/0x31 returned with error code -1 
calling  acpi_pci_init+0x0/0x57 @ 1
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x57 returned 0 after 0 usecs
calling  init_acpi_device_notify+0x0/0x4b @ 1
initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 usecs
calling  dmi_id_init+0x0/0x2ee @ 1
initcall dmi_id_init+0x0/0x2ee returned 0 after 0 usecs
calling  pci_arch_init+0x0/0x57 @ 1
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort.
initcall pci_arch_init+0x0/0x57 returned 0 after 3906 usecs
calling  topology_init+0x0/0x81 @ 1
initcall topology_init+0x0/0x81 returned 0 after 0 usecs
calling  mtrr_init_finialize+0x0/0x3d @ 1
initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs
calling  param_sysfs_init+0x0/0x1ce @ 1
initcall param_sysfs_init+0x0/0x1ce returned 0 after 7812 usecs
calling  pm_sysrq_init+0x0/0x19 @ 1
initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
calling  readahead_init+0x0/0x38 @ 1
initcall readahead_init+0x0/0x38 returned 0 after 0 usecs
calling  init_bio+0x0/0xd0 @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xd0 returned 0 after 0 usecs
calling  cryptomgr_init+0x0/0x31 @ 1
initcall cryptomgr_init+0x0/0x31 returned 0 after 0 usecs
calling  blk_settings_init+0x0/0x2a @ 1
initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
calling  blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
calling  blk_softirq_init+0x0/0x75 @ 1
initcall blk_softirq_init+0x0/0x75 returned 0 after 0 usecs
calling  genhd_device_init+0x0/0x66 @ 1
initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs
calling  pci_slot_init+0x0/0x45 @ 1
initcall pci_slot_init+0x0/0x45 returned 0 after 0 usecs
calling  fbmem_init+0x0/0x91 @ 1
initcall fbmem_init+0x0/0x91 returned 0 after 0 usecs
calling  acpi_init+0x0/0x235 @ 1
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 7FE58000, 04F0 (r2 HP     PNOWSSDT        2 HP          1)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at 80000000 - 8fffffff
initcall acpi_init+0x0/0x235 returned 0 after 23437 usecs
calling  acpi_scan_init+0x0/0x10e @ 1
initcall acpi_scan_init+0x0/0x10e returned 0 after 11718 usecs
calling  acpi_ec_init+0x0/0x61 @ 1
initcall acpi_ec_init+0x0/0x61 returned 0 after 0 usecs
calling  acpi_pci_root_init+0x0/0x28 @ 1
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xf7de0000-0xf7de0fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xf7dd0000-0xf7dd00ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:01:03.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff]
pci 0000:01:03.0: reg 18 32bit mmio: [0xf7ff0000-0xf7ffffff]
pci 0000:01:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff]
pci 0000:01:04.0: reg 14 32bit mmio: [0xf7fe0000-0xf7fe01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff]
pci 0000:01:04.2: reg 14 32bit mmio: [0xf7fd0000-0xf7fd07ff]
pci 0000:01:04.2: reg 18 32bit mmio: [0xf7fc0000-0xf7fc1fff]
pci 0000:01:04.2: reg 1c 32bit mmio: [0xf7f00000-0xf7f7ffff]
pci 0000:01:04.2: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: PME# disabled
pci 0000:01:04.6: reg 10 32bit mmio: [0xf7ef0000-0xf7ef00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: PME# disabled
pci 0000:00:09.0: transparent bridge
pci 0000:00:09.0: bridge io port: [0x1000-0x2fff]
pci 0000:00:09.0: bridge 32bit mmio: [0xf7e00000-0xf7ffffff]
pci 0000:00:09.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0b.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:02:00.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:0c.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:05:00.0: reg 10 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:0d.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:07:04.0: reg 10 64bit mmio: [0xfdcf0000-0xfdcfffff]
pci 0000:07:04.0: reg 18 64bit mmio: [0xfdce0000-0xfdceffff]
pci 0000:07:04.0: PME# supported from D3hot D3cold
pci 0000:07:04.0: PME# disabled
pci 0000:07:04.1: reg 10 64bit mmio: [0xfdcd0000-0xfdcdffff]
pci 0000:07:04.1: reg 18 64bit mmio: [0xfdcc0000-0xfdccffff]
pci 0000:07:04.1: PME# supported from D3hot D3cold
pci 0000:07:04.1: PME# disabled
pci 0000:06:00.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:08:00.0: reg 10 64bit mmio: [0xfddf0000-0xfddf0fff]
pci 0000:08:00.0: reg 18 64bit mmio: [0xfdde0000-0xfdde00ff]
pci 0000:08:00.0: reg 20 io port: [0x3000-0x30ff]
pci 0000:08:00.0: reg 30 32bit mmio: [0x000000-0x03ffff]
pci 0000:08:00.1: reg 10 64bit mmio: [0xfddd0000-0xfddd0fff]
pci 0000:08:00.1: reg 18 64bit mmio: [0xfddc0000-0xfddc00ff]
pci 0000:08:00.1: reg 20 io port: [0x3400-0x34ff]
pci 0000:08:00.1: reg 30 32bit mmio: [0x000000-0x03ffff]
pci 0000:00:0e.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:0e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
pci 0000:40:01.0: reg 14 32bit mmio: [0xfdef0000-0xfdef0fff]
pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0c.0: PME# disabled
pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0d.0: PME# disabled
pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0e.0: PME# disabled
pci 0000:41:00.0: PME# supported from D0 D3hot D3cold
pci 0000:41:00.0: PME# disabled
pci 0000:40:0c.0: bridge io port: [0x4000-0x4fff]
pci 0000:40:0c.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
pci 0000:42:08.0: reg 10 64bit mmio: [0xfdf80000-0xfdffffff]
pci 0000:42:08.0: reg 18 io port: [0x4000-0x40ff]
pci 0000:42:08.0: reg 1c 32bit mmio: [0xfdf70000-0xfdf77fff]
pci 0000:42:08.0: reg 30 32bit mmio: [0x000000-0x003fff]
pci 0000:42:08.0: supports D1
pci 0000:41:00.0: bridge io port: [0x4000-0x4fff]
pci 0000:41:00.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT]
initcall acpi_pci_root_init+0x0/0x28 returned 0 after 35156 usecs
calling  acpi_pci_link_init+0x0/0x63 @ 1
ACPI: PCI Interrupt Link [LNKW] (IRQs *16)
ACPI: PCI Interrupt Link [LNKX] (IRQs *17)
ACPI: PCI Interrupt Link [LNKY] (IRQs *18)
ACPI: PCI Interrupt Link [LNKZ] (IRQs *19)
ACPI: PCI Interrupt Link [LNU0] (IRQs *22)
ACPI: PCI Interrupt Link [LNU2] (IRQs *23)
ACPI: PCI Interrupt Link [LNKA] (IRQs *54)
ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
initcall acpi_pci_link_init+0x0/0x63 returned 0 after 7812 usecs
calling  acpi_power_init+0x0/0x77 @ 1
initcall acpi_power_init+0x0/0x77 returned 0 after 0 usecs
calling  acpi_system_init+0x0/0x263 @ 1
initcall acpi_system_init+0x0/0x263 returned 0 after 0 usecs
calling  pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
calling  misc_init+0x0/0x9f @ 1
initcall misc_init+0x0/0x9f returned 0 after 0 usecs
calling  cn_init+0x0/0xee @ 1
initcall cn_init+0x0/0xee returned 0 after 0 usecs
calling  phy_init+0x0/0x31 @ 1
initcall phy_init+0x0/0x31 returned 0 after 3906 usecs
calling  init_scsi+0x0/0x91 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x91 returned 0 after 0 usecs
calling  usb_init+0x0/0x155 @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x155 returned 0 after 0 usecs
calling  serio_init+0x0/0x89 @ 1
initcall serio_init+0x0/0x89 returned 0 after 0 usecs
calling  input_init+0x0/0x10e @ 1
initcall input_init+0x0/0x10e returned 0 after 0 usecs
calling  rtc_init+0x0/0x71 @ 1
initcall rtc_init+0x0/0x71 returned 0 after 0 usecs
calling  power_supply_class_init+0x0/0x38 @ 1
initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs
calling  hwmon_init+0x0/0x42 @ 1
initcall hwmon_init+0x0/0x42 returned 0 after 0 usecs
calling  thermal_init+0x0/0x58 @ 1
initcall thermal_init+0x0/0x58 returned 0 after 0 usecs
calling  pci_subsys_init+0x0/0x12c @ 1
PCI: Using ACPI for IRQ routing
initcall pci_subsys_init+0x0/0x12c returned 0 after 0 usecs
calling  proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 0 usecs
calling  net_dev_init+0x0/0x176 @ 1
initcall net_dev_init+0x0/0x176 returned 0 after 3906 usecs
calling  neigh_init+0x0/0x71 @ 1
initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
calling  fib_rules_init+0x0/0xa6 @ 1
initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
calling  genl_init+0x0/0xd9 @ 1
initcall genl_init+0x0/0xd9 returned 0 after 19531 usecs
calling  sysctl_init+0x0/0x49 @ 1
initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs
calling  pci_iommu_init+0x0/0x12 @ 1
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
initcall pci_iommu_init+0x0/0x12 returned 0 after 0 usecs
calling  print_all_ICs+0x0/0x4db @ 1
initcall print_all_ICs+0x0/0x4db returned 0 after 0 usecs
calling  hpet_late_init+0x0/0x1a2 @ 1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
initcall hpet_late_init+0x0/0x1a2 returned 0 after 11718 usecs
calling  clocksource_done_booting+0x0/0x12 @ 1
initcall clocksource_done_booting+0x0/0x12 returned 0 after 0 usecs
calling  rb_init_debugfs+0x0/0x40 @ 1
initcall rb_init_debugfs+0x0/0x40 returned 0 after 0 usecs
calling  tracer_init_debugfs+0x0/0x296 @ 1
initcall tracer_init_debugfs+0x0/0x296 returned 0 after 0 usecs
calling  init_pipe_fs+0x0/0x4c @ 1
initcall init_pipe_fs+0x0/0x4c returned 0 after 0 usecs
calling  init_mnt_writers+0x0/0x5f @ 1
initcall init_mnt_writers+0x0/0x5f returned 0 after 0 usecs
calling  eventpoll_init+0x0/0xa4 @ 1
initcall eventpoll_init+0x0/0xa4 returned 0 after 0 usecs
calling  anon_inode_init+0x0/0x11d @ 1
initcall anon_inode_init+0x0/0x11d returned 0 after 0 usecs
calling  acpi_event_init+0x0/0x80 @ 1
initcall acpi_event_init+0x0/0x80 returned 0 after 12103 usecs
calling  pnpacpi_init+0x0/0x8c @ 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x8c returned 0 after 10998 usecs
calling  pnp_system_init+0x0/0x12 @ 1
system 00:01: ioport range 0x408-0x40f has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x700-0x73f has been reserved
system 00:01: ioport range 0x800-0x8fe has been reserved
system 00:01: ioport range 0x900-0x9fe has been reserved
system 00:01: ioport range 0x9ff-0x9ff has been reserved
system 00:01: ioport range 0xa00-0xafe has been reserved
system 00:01: ioport range 0xaff-0xaff has been reserved
system 00:01: ioport range 0xb00-0xbfe has been reserved
system 00:01: ioport range 0xbff-0xbff has been reserved
system 00:01: ioport range 0xc80-0xc83 has been reserved
system 00:01: ioport range 0xcd4-0xcd7 has been reserved
system 00:01: ioport range 0xf50-0xf58 has been reserved
system 00:01: ioport range 0xca0-0xca1 has been reserved
system 00:01: ioport range 0xca4-0xca5 has been reserved
system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
system 00:01: ioport range 0x3f8-0x3ff has been reserved
system 00:01: iomem range 0x80000000-0x8fffffff could not be reserved
system 00:01: iomem range 0xf7df0000-0xf7df0fff has been reserved
system 00:01: iomem range 0xfdef0000-0xfdef0fff has been reserved
initcall pnp_system_init+0x0/0x12 returned 0 after 3816 usecs
calling  chr_dev_init+0x0/0xa1 @ 1
initcall chr_dev_init+0x0/0xa1 returned 0 after 1224 usecs
calling  firmware_class_init+0x0/0x79 @ 1
initcall firmware_class_init+0x0/0x79 returned 0 after 95 usecs
calling  cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 2 usecs
calling  cpufreq_gov_userspace_init+0x0/0x12 @ 1
initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 1 usecs
calling  init_acpi_pm_clocksource+0x0/0xdd @ 1
initcall init_acpi_pm_clocksource+0x0/0xdd returned 0 after 4392 usecs
calling  ssb_modinit+0x0/0x4a @ 1
initcall ssb_modinit+0x0/0x4a returned 0 after 119 usecs
calling  pcibios_assign_resources+0x0/0x87 @ 1
pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
pci 0000:00:09.0:   IO window: 0x1000-0x2fff
pci 0000:00:09.0:   MEM window: 0xf7e00000-0xf7ffffff
pci 0000:00:09.0:   PREFETCH window: 0x000000e8000000-0x000000efffffff
pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
pci 0000:02:00.0:   IO window: disabled
pci 0000:02:00.0:   MEM window: 0xf8000000-0xf9ffffff
pci 0000:02:00.0:   PREFETCH window: 0x00000090000000-0x000000900fffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0b.0:   IO window: disabled
pci 0000:00:0b.0:   MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:0b.0:   PREFETCH window: 0x00000090000000-0x000000900fffff
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0:   IO window: disabled
pci 0000:04:00.0:   MEM window: 0xfa000000-0xfbffffff
pci 0000:04:00.0:   PREFETCH window: 0x00000090100000-0x000000901fffff
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0:   IO window: disabled
pci 0000:00:0c.0:   MEM window: 0xfa000000-0xfbffffff
pci 0000:00:0c.0:   PREFETCH window: 0x00000090100000-0x000000901fffff
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0:   IO window: disabled
pci 0000:06:00.0:   MEM window: 0xfdc00000-0xfdcfffff
pci 0000:06:00.0:   PREFETCH window: disabled
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:06
pci 0000:00:0d.0:   IO window: disabled
pci 0000:00:0d.0:   MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:0d.0:   PREFETCH window: disabled
pci 0000:00:0e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:0e.0:   IO window: 0x3000-0x3fff
pci 0000:00:0e.0:   MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:0e.0:   PREFETCH window: 0x00000090200000-0x000000902fffff
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci 0000:42:04.0: PCI bridge, secondary bus 0000:43
pci 0000:42:04.0:   IO window: disabled
pci 0000:42:04.0:   MEM window: disabled
pci 0000:42:04.0:   PREFETCH window: disabled
pci 0000:41:00.0: PCI bridge, secondary bus 0000:42
pci 0000:41:00.0:   IO window: 0x4000-0x4fff
pci 0000:41:00.0:   MEM window: 0xfdf00000-0xfdffffff
pci 0000:41:00.0:   PREFETCH window: 0x00000084000000-0x000000840fffff
pci 0000:40:0c.0: PCI bridge, secondary bus 0000:41
pci 0000:40:0c.0:   IO window: 0x4000-0x4fff
pci 0000:40:0c.0:   MEM window: 0xfdf00000-0xfdffffff
pci 0000:40:0c.0:   PREFETCH window: 0x00000084000000-0x000000840fffff
pci 0000:40:0d.0: PCI bridge, secondary bus 0000:44
pci 0000:40:0d.0:   IO window: disabled
pci 0000:40:0d.0:   MEM window: disabled
pci 0000:40:0d.0:   PREFETCH window: disabled
pci 0000:40:0e.0: PCI bridge, secondary bus 0000:47
pci 0000:40:0e.0:   IO window: disabled
pci 0000:40:0e.0:   MEM window: disabled
pci 0000:40:0e.0:   PREFETCH window: disabled
pci 0000:40:0c.0: setting latency timer to 64
pci 0000:41:00.0: setting latency timer to 64
pci 0000:40:0d.0: setting latency timer to 64
pci 0000:40:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0x3fff]
pci_bus 0000:00: resource 1 mem: [0x90000000-0xfddfffff]
pci_bus 0000:00: resource 2 mem: [0x80000000-0x83ffffff]
pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff]
pci_bus 0000:00: resource 4 mem: [0xfe000000-0xffffffff]
pci_bus 0000:00: resource 5 mem: [0x280000000-0xfcffffffff]
pci_bus 0000:01: resource 0 io:  [0x1000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xf7e00000-0xf7ffffff]
pci_bus 0000:01: resource 2 mem: [0xe8000000-0xefffffff]
pci_bus 0000:01: resource 3 io:  [0x00-0x3fff]
pci_bus 0000:01: resource 4 mem: [0x90000000-0xfddfffff]
pci_bus 0000:01: resource 5 mem: [0x80000000-0x83ffffff]
pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff]
pci_bus 0000:01: resource 7 mem: [0xfe000000-0xffffffff]
pci_bus 0000:01: resource 8 mem: [0x280000000-0xfcffffffff]
pci_bus 0000:02: resource 0 mem: [0x0-0x0]
pci_bus 0000:02: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:02: resource 2 mem: [0x90000000-0x900fffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 mem: [0x0-0x0]
pci_bus 0000:03: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:03: resource 2 mem: [0x90000000-0x900fffff]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 mem: [0x0-0x0]
pci_bus 0000:04: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:04: resource 2 mem: [0x90100000-0x901fffff]
pci_bus 0000:04: resource 3 mem: [0x0-0x0]
pci_bus 0000:05: resource 0 mem: [0x0-0x0]
pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:05: resource 2 mem: [0x90100000-0x901fffff]
pci_bus 0000:05: resource 3 mem: [0x0-0x0]
pci_bus 0000:06: resource 0 mem: [0x0-0x0]
pci_bus 0000:06: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:06: resource 2 mem: [0x0-0x0]
pci_bus 0000:06: resource 3 mem: [0x0-0x0]
pci_bus 0000:07: resource 0 mem: [0x0-0x0]
pci_bus 0000:07: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:07: resource 2 mem: [0x0-0x0]
pci_bus 0000:07: resource 3 mem: [0x0-0x0]
pci_bus 0000:08: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:08: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:08: resource 2 mem: [0x90200000-0x902fffff]
pci_bus 0000:08: resource 3 mem: [0x0-0x0]
pci_bus 0000:40: resource 0 io:  [0x4000-0xffff]
pci_bus 0000:40: resource 1 mem: [0xfde00000-0xfdffffff]
pci_bus 0000:40: resource 2 mem: [0x84000000-0x8fffffff]
pci_bus 0000:41: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:41: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:41: resource 2 mem: [0x84000000-0x840fffff]
pci_bus 0000:41: resource 3 mem: [0x0-0x0]
pci_bus 0000:42: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:42: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:42: resource 2 mem: [0x84000000-0x840fffff]
pci_bus 0000:42: resource 3 mem: [0x0-0x0]
pci_bus 0000:43: resource 0 mem: [0x0-0x0]
pci_bus 0000:43: resource 1 mem: [0x0-0x0]
pci_bus 0000:43: resource 2 mem: [0x0-0x0]
pci_bus 0000:43: resource 3 mem: [0x0-0x0]
pci_bus 0000:44: resource 0 mem: [0x0-0x0]
pci_bus 0000:44: resource 1 mem: [0x0-0x0]
pci_bus 0000:44: resource 2 mem: [0x0-0x0]
pci_bus 0000:44: resource 3 mem: [0x0-0x0]
pci_bus 0000:47: resource 0 mem: [0x0-0x0]
pci_bus 0000:47: resource 1 mem: [0x0-0x0]
pci_bus 0000:47: resource 2 mem: [0x0-0x0]
pci_bus 0000:47: resource 3 mem: [0x0-0x0]
initcall pcibios_assign_resources+0x0/0x87 returned 0 after 31013 usecs
calling  sysctl_core_init+0x0/0x38 @ 1
initcall sysctl_core_init+0x0/0x38 returned 0 after 13 usecs
calling  inet_init+0x0/0x204 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x204 returned 0 after 69312 usecs
calling  af_unix_init+0x0/0x55 @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55 returned 0 after 211 usecs
calling  populate_rootfs+0x0/0xea @ 1
checking if image is initramfs... it is
Clocksource tsc unstable (delta = 15126891715 ns)
Freeing initrd memory: 1324k freed
initcall populate_rootfs+0x0/0xea returned 0 after 259186 usecs
calling  i8259A_init_sysfs+0x0/0x22 @ 1
initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 316 usecs
calling  vsyscall_init+0x0/0x6c @ 1
initcall vsyscall_init+0x0/0x6c returned 0 after 15 usecs
calling  sbf_init+0x0/0xd7 @ 1
initcall sbf_init+0x0/0xd7 returned 0 after 1 usecs
calling  i8237A_init_sysfs+0x0/0x22 @ 1
initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 283 usecs
calling  add_rtc_cmos+0x0/0xa1 @ 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
initcall add_rtc_cmos+0x0/0xa1 returned 0 after 346 usecs
calling  cache_sysfs_init+0x0/0x62 @ 1
initcall cache_sysfs_init+0x0/0x62 returned 0 after 1789 usecs
calling  mce_init_device+0x0/0x91 @ 1
initcall mce_init_device+0x0/0x91 returned 0 after 715 usecs
calling  periodic_mcheck_init+0x0/0x3f @ 1
initcall periodic_mcheck_init+0x0/0x3f returned 0 after 4 usecs
calling  thermal_throttle_init_device+0x0/0x8d @ 1
initcall thermal_throttle_init_device+0x0/0x8d returned 0 after 0 usecs
calling  threshold_init_device+0x0/0x4d @ 1
initcall threshold_init_device+0x0/0x4d returned 0 after 2 usecs
calling  msr_init+0x0/0x109 @ 1
initcall msr_init+0x0/0x109 returned 0 after 587 usecs
calling  cpuid_init+0x0/0x109 @ 1
initcall cpuid_init+0x0/0x109 returned 0 after 632 usecs
calling  init_lapic_sysfs+0x0/0x2d @ 1
initcall init_lapic_sysfs+0x0/0x2d returned 0 after 195 usecs
calling  ioapic_init_sysfs+0x0/0x99 @ 1
initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 294 usecs
calling  add_pcspkr+0x0/0x28 @ 1
initcall add_pcspkr+0x0/0x28 returned 0 after 122 usecs
calling  microcode_init+0x0/0x11e @ 1
microcode: no support for this CPU vendor
initcall microcode_init+0x0/0x11e returned -19 after 180 usecs
calling  uv_ptc_init+0x0/0x4f @ 1
initcall uv_ptc_init+0x0/0x4f returned 0 after 1 usecs
calling  uv_bau_init+0x0/0x591 @ 1
initcall uv_bau_init+0x0/0x591 returned 0 after 1 usecs
calling  sgi_uv_sysfs_init+0x0/0x96 @ 1
initcall sgi_uv_sysfs_init+0x0/0x96 returned 0 after 10 usecs
calling  audit_classes_init+0x0/0xaf @ 1
initcall audit_classes_init+0x0/0xaf returned 0 after 7 usecs
calling  init_vdso_vars+0x0/0x1f2 @ 1
initcall init_vdso_vars+0x0/0x1f2 returned 0 after 19 usecs
calling  ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 5 usecs
calling  sysenter_setup+0x0/0x2cc @ 1
initcall sysenter_setup+0x0/0x2cc returned 0 after 10 usecs
calling  init_aout_binfmt+0x0/0x12 @ 1
initcall init_aout_binfmt+0x0/0x12 returned 0 after 1 usecs
calling  proc_schedstat_init+0x0/0x22 @ 1
initcall proc_schedstat_init+0x0/0x22 returned 0 after 10 usecs
calling  proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 3 usecs
calling  ioresources_init+0x0/0x3c @ 1
initcall ioresources_init+0x0/0x3c returned 0 after 5 usecs
calling  uid_cache_init+0x0/0x69 @ 1
initcall uid_cache_init+0x0/0x69 returned 0 after 11 usecs
calling  init_posix_timers+0x0/0x108 @ 1
initcall init_posix_timers+0x0/0x108 returned 0 after 5 usecs
calling  init_posix_cpu_timers+0x0/0xd4 @ 1
initcall init_posix_cpu_timers+0x0/0xd4 returned 0 after 0 usecs
calling  nsproxy_cache_init+0x0/0x2d @ 1
initcall nsproxy_cache_init+0x0/0x2d returned 0 after 3 usecs
calling  create_proc_profile+0x0/0x2d5 @ 1
initcall create_proc_profile+0x0/0x2d5 returned 0 after 1 usecs
calling  timekeeping_init_device+0x0/0x22 @ 1
initcall timekeeping_init_device+0x0/0x22 returned 0 after 212 usecs
calling  init_clocksource_sysfs+0x0/0x50 @ 1
initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 207 usecs
calling  init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 10 usecs
calling  init_tstats_procfs+0x0/0x2c @ 1
initcall init_tstats_procfs+0x0/0x2c returned 0 after 3 usecs
calling  futex_init+0x0/0x63 @ 1
initcall futex_init+0x0/0x63 returned 0 after 15 usecs
calling  proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 3 usecs
calling  proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 3 usecs
calling  percpu_modinit+0x0/0x6f @ 1
initcall percpu_modinit+0x0/0x6f returned 0 after 1 usecs
calling  kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 2 usecs
calling  snapshot_device_init+0x0/0x12 @ 1
initcall snapshot_device_init+0x0/0x12 returned 0 after 138 usecs
calling  crash_save_vmcoreinfo_init+0x0/0x468 @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x468 returned 0 after 35 usecs
calling  crash_notes_memory_init+0x0/0x3d @ 1
initcall crash_notes_memory_init+0x0/0x3d returned 0 after 18 usecs
calling  ikconfig_init+0x0/0x39 @ 1
initcall ikconfig_init+0x0/0x39 returned 0 after 6 usecs
calling  audit_init+0x0/0x15a @ 1
audit: initializing netlink socket (disabled)
type=2000 audit(1234115210.035:1): initialized
initcall audit_init+0x0/0x15a returned 0 after 379 usecs
calling  audit_tree_init+0x0/0x49 @ 1
initcall audit_tree_init+0x0/0x49 returned 0 after 2 usecs
calling  init_kprobes+0x0/0x139 @ 1
initcall init_kprobes+0x0/0x139 returned 0 after 5714 usecs
calling  utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 4 usecs
calling  init_tracepoints+0x0/0x12 @ 1
initcall init_tracepoints+0x0/0x12 returned 0 after 1 usecs
calling  init_per_zone_pages_min+0x0/0x8e @ 1
initcall init_per_zone_pages_min+0x0/0x8e returned 0 after 940 usecs
calling  pdflush_init+0x0/0x1d @ 1
initcall pdflush_init+0x0/0x1d returned 0 after 122 usecs
calling  kswapd_init+0x0/0x64 @ 1
initcall kswapd_init+0x0/0x64 returned 0 after 162 usecs
calling  init_tmpfs+0x0/0xda @ 1
initcall init_tmpfs+0x0/0xda returned 0 after 90 usecs
calling  setup_vmstat+0x0/0xc3 @ 1
initcall setup_vmstat+0x0/0xc3 returned 0 after 31 usecs
calling  mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 7 usecs
calling  proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 3 usecs
calling  procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 4 usecs
calling  hugetlb_init+0x0/0x2d1 @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x2d1 returned 0 after 240 usecs
calling  slab_proc_init+0x0/0x25 @ 1
initcall slab_proc_init+0x0/0x25 returned 0 after 4 usecs
calling  slab_sysfs_init+0x0/0xf0 @ 1
initcall slab_sysfs_init+0x0/0xf0 returned 0 after 6717 usecs
calling  fasync_init+0x0/0x2a @ 1
initcall fasync_init+0x0/0x2a returned 0 after 15 usecs
calling  proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 14 usecs
calling  dnotify_init+0x0/0x2a @ 1
initcall dnotify_init+0x0/0x2a returned 0 after 202 usecs
calling  inotify_setup+0x0/0x12 @ 1
initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
calling  inotify_user_setup+0x0/0xb8 @ 1
initcall inotify_user_setup+0x0/0xb8 returned 0 after 33 usecs
calling  aio_setup+0x0/0x71 @ 1
initcall aio_setup+0x0/0x71 returned 0 after 240 usecs
calling  proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 6 usecs
calling  init_sys32_ioctl+0x0/0x85 @ 1
initcall init_sys32_ioctl+0x0/0x85 returned 0 after 31 usecs
calling  init_mbcache+0x0/0x14 @ 1
initcall init_mbcache+0x0/0x14 returned 0 after 2 usecs
calling  dquot_init+0x0/0xe0 @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xe0 returned 0 after 566 usecs
calling  proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 5 usecs
calling  proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 3 usecs
calling  proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 3 usecs
calling  proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 3 usecs
calling  proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 4 usecs
calling  proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 3 usecs
calling  proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 4 usecs
calling  proc_uptime_init+0x0/0x2d @ 1
initcall proc_uptime_init+0x0/0x2d returned 0 after 4 usecs
calling  proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 4 usecs
calling  proc_kcore_init+0x0/0x49 @ 1
initcall proc_kcore_init+0x0/0x49 returned 0 after 4 usecs
calling  vmcore_init+0x0/0x8be @ 1
initcall vmcore_init+0x0/0x8be returned 0 after 1 usecs
calling  proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 4 usecs
calling  proc_page_init+0x0/0x42 @ 1
initcall proc_page_init+0x0/0x42 returned 0 after 8 usecs
calling  configfs_init+0x0/0xb3 @ 1
initcall configfs_init+0x0/0xb3 returned 0 after 185 usecs
calling  init_devpts_fs+0x0/0x3f @ 1
initcall init_devpts_fs+0x0/0x3f returned 0 after 23 usecs
calling  init_ext3_fs+0x0/0x6a @ 1
initcall init_ext3_fs+0x0/0x6a returned 0 after 349 usecs
calling  journal_init+0x0/0x99 @ 1
initcall journal_init+0x0/0x99 returned 0 after 534 usecs
calling  init_ext2_fs+0x0/0x6a @ 1
initcall init_ext2_fs+0x0/0x6a returned 0 after 141 usecs
calling  init_ramfs_fs+0x0/0x12 @ 1
initcall init_ramfs_fs+0x0/0x12 returned 0 after 2 usecs
calling  init_hugetlbfs_fs+0x0/0x98 @ 1
initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 197 usecs
calling  init_fat_fs+0x0/0x4f @ 1
initcall init_fat_fs+0x0/0x4f returned 0 after 360 usecs
calling  init_vfat_fs+0x0/0x12 @ 1
initcall init_vfat_fs+0x0/0x12 returned 0 after 8 usecs
calling  init_msdos_fs+0x0/0x12 @ 1
initcall init_msdos_fs+0x0/0x12 returned 0 after 1 usecs
calling  init_iso9660_fs+0x0/0x6c @ 1
initcall init_iso9660_fs+0x0/0x6c returned 0 after 195 usecs
calling  init_nfs_fs+0x0/0x111 @ 1
initcall init_nfs_fs+0x0/0x111 returned 0 after 488 usecs
calling  init_nfsd+0x0/0xbb @ 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
initcall init_nfsd+0x0/0xbb returned 0 after 435 usecs
calling  init_nlm+0x0/0x22 @ 1
initcall init_nlm+0x0/0x22 returned 0 after 9 usecs
calling  init_nls_cp437+0x0/0x12 @ 1
initcall init_nls_cp437+0x0/0x12 returned 0 after 1 usecs
calling  init_nls_cp850+0x0/0x12 @ 1
initcall init_nls_cp850+0x0/0x12 returned 0 after 1 usecs
calling  init_nls_ascii+0x0/0x12 @ 1
initcall init_nls_ascii+0x0/0x12 returned 0 after 1 usecs
calling  init_nls_iso8859_1+0x0/0x12 @ 1
initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_iso8859_15+0x0/0x12 @ 1
initcall init_nls_iso8859_15+0x0/0x12 returned 0 after 1 usecs
calling  init_nls_utf8+0x0/0x25 @ 1
initcall init_nls_utf8+0x0/0x25 returned 0 after 1 usecs
calling  ipc_init+0x0/0x23 @ 1
msgmni has been set to 16012
initcall ipc_init+0x0/0x23 returned 0 after 191 usecs
calling  ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 3 usecs
calling  init_mqueue_fs+0x0/0xc6 @ 1
initcall init_mqueue_fs+0x0/0xc6 returned 0 after 199 usecs
calling  crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 5 usecs
calling  chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after 2 usecs
calling  eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after 1 usecs
calling  hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 1 usecs
calling  md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 117 usecs
calling  sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 111 usecs
calling  crypto_cbc_module_init+0x0/0x12 @ 1
initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 2 usecs
calling  des_generic_mod_init+0x0/0x3f @ 1
initcall des_generic_mod_init+0x0/0x3f returned 0 after 210 usecs
calling  cast5_mod_init+0x0/0x12 @ 1
initcall cast5_mod_init+0x0/0x12 returned 0 after 102 usecs
calling  deflate_mod_init+0x0/0x12 @ 1
initcall deflate_mod_init+0x0/0x12 returned 0 after 940 usecs
calling  crc32c_mod_init+0x0/0x12 @ 1
initcall crc32c_mod_init+0x0/0x12 returned 0 after 118 usecs
calling  crypto_authenc_module_init+0x0/0x12 @ 1
initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 2 usecs
calling  krng_mod_init+0x0/0x12 @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0x12 returned 0 after 254 usecs
calling  proc_genhd_init+0x0/0x3c @ 1
initcall proc_genhd_init+0x0/0x3c returned 0 after 9 usecs
calling  bsg_init+0x0/0x126 @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
initcall bsg_init+0x0/0x126 returned 0 after 483 usecs
calling  noop_init+0x0/0x14 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x14 returned 0 after 178 usecs
calling  as_init+0x0/0x14 @ 1
io scheduler anticipatory registered
initcall as_init+0x0/0x14 returned 0 after 179 usecs
calling  deadline_init+0x0/0x14 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x14 returned 0 after 178 usecs
calling  cfq_init+0x0/0x94 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x94 returned 0 after 560 usecs
calling  libcrc32c_mod_init+0x0/0x2c @ 1
initcall libcrc32c_mod_init+0x0/0x2c returned 0 after 4 usecs
calling  percpu_counter_startup+0x0/0x19 @ 1
initcall percpu_counter_startup+0x0/0x19 returned 0 after 3 usecs
calling  pci_init+0x0/0x36 @ 1
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Enabling HT MSI Mapping
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Enabling HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
pci 0000:01:03.0: Boot video device
pci 0000:01:04.4: HCRESET not completed yet!
pci 0000:40:00.0: Enabling HT MSI Mapping
pci 0000:40:0c.0: Enabling HT MSI Mapping
pci 0000:40:0c.0: Found enabled HT MSI Mapping
pci 0000:40:0d.0: Enabling HT MSI Mapping
pci 0000:40:0d.0: Found enabled HT MSI Mapping
pci 0000:40:0e.0: Enabling HT MSI Mapping
pci 0000:40:0e.0: Found enabled HT MSI Mapping
initcall pci_init+0x0/0x36 returned 0 after 3926 usecs
calling  pci_proc_init+0x0/0x6a @ 1
initcall pci_proc_init+0x0/0x6a returned 0 after 195 usecs
calling  pcie_portdrv_init+0x0/0x4c @ 1
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 48 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 49 for MSI/MSI-X
pcieport-driver 0000:00:0d.0: setting latency timer to 64
pcieport-driver 0000:00:0d.0: irq 50 for MSI/MSI-X
pcieport-driver 0000:00:0e.0: setting latency timer to 64
pcieport-driver 0000:00:0e.0: irq 51 for MSI/MSI-X
pcieport-driver 0000:40:0c.0: setting latency timer to 64
pcieport-driver 0000:40:0c.0: irq 52 for MSI/MSI-X
pcieport-driver 0000:40:0d.0: setting latency timer to 64
pcieport-driver 0000:40:0d.0: irq 53 for MSI/MSI-X
pcieport-driver 0000:40:0e.0: setting latency timer to 64
pcieport-driver 0000:40:0e.0: irq 54 for MSI/MSI-X
initcall pcie_portdrv_init+0x0/0x4c returned 0 after 6084 usecs
calling  fb_console_init+0x0/0x12a @ 1
initcall fb_console_init+0x0/0x12a returned 0 after 130 usecs
calling  genericbl_init+0x0/0x12 @ 1
initcall genericbl_init+0x0/0x12 returned 0 after 113 usecs
calling  rivafb_init+0x0/0x1a5 @ 1
initcall rivafb_init+0x0/0x1a5 returned 0 after 167 usecs
calling  nvidiafb_init+0x0/0x2b6 @ 1
initcall nvidiafb_init+0x0/0x2b6 returned 0 after 146 usecs
calling  vt8623fb_init+0x0/0x59 @ 1
initcall vt8623fb_init+0x0/0x59 returned 0 after 145 usecs
calling  vesafb_init+0x0/0x235 @ 1
initcall vesafb_init+0x0/0x235 returned 0 after 251 usecs
calling  acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 6 usecs
calling  acpi_ac_init+0x0/0x45 @ 1
initcall acpi_ac_init+0x0/0x45 returned 0 after 138 usecs
calling  acpi_button_init+0x0/0x5e @ 1
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
initcall acpi_button_init+0x0/0x5e returned 0 after 748 usecs
calling  acpi_fan_init+0x0/0x5e @ 1
initcall acpi_fan_init+0x0/0x5e returned 0 after 101 usecs
calling  irqrouter_init_sysfs+0x0/0x38 @ 1
initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 206 usecs
calling  acpi_processor_init+0x0/0x107 @ 1
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
processor ACPI_CPU:02: registered as cooling_device2
processor ACPI_CPU:03: registered as cooling_device3
initcall acpi_processor_init+0x0/0x107 returned 0 after 2456 usecs
calling  acpi_container_init+0x0/0x42 @ 1
initcall acpi_container_init+0x0/0x42 returned 0 after 2062 usecs
calling  acpi_thermal_init+0x0/0x83 @ 1
initcall acpi_thermal_init+0x0/0x83 returned 0 after 181 usecs
calling  rand_initialize+0x0/0x2c @ 1
initcall rand_initialize+0x0/0x2c returned 0 after 35 usecs
calling  tty_init+0x0/0xf5 @ 1
initcall tty_init+0x0/0xf5 returned 0 after 22366 usecs
calling  pty_init+0x0/0x284 @ 1
initcall pty_init+0x0/0x284 returned 0 after 170 usecs
calling  sysrq_init+0x0/0x25 @ 1
initcall sysrq_init+0x0/0x25 returned 0 after 14 usecs
calling  raw_init+0x0/0xdd @ 1
initcall raw_init+0x0/0xdd returned 0 after 242 usecs
calling  hpet_init+0x0/0x6a @ 1
initcall hpet_init+0x0/0x6a returned 0 after 414 usecs
calling  nvram_init+0x0/0x82 @ 1
Non-volatile memory driver v1.3
initcall nvram_init+0x0/0x82 returned 0 after 334 usecs
calling  mod_init+0x0/0x1f8 @ 1
initcall mod_init+0x0/0x1f8 returned -19 after 241 usecs
calling  mod_init+0x0/0xba @ 1
initcall mod_init+0x0/0xba returned -19 after 56 usecs
calling  agp_init+0x0/0x26 @ 1
Linux agpgart interface v0.103
initcall agp_init+0x0/0x26 returned 0 after 194 usecs
calling  agp_intel_init+0x0/0x29 @ 1
initcall agp_intel_init+0x0/0x29 returned 0 after 148 usecs
calling  agp_via_init+0x0/0x29 @ 1
initcall agp_via_init+0x0/0x29 returned 0 after 149 usecs
calling  ipmi_init_msghandler_mod+0x0/0xd @ 1
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xd returned 0 after 302 usecs
calling  init_ipmi_devintf+0x0/0xfa @ 1
ipmi device interface
initcall init_ipmi_devintf+0x0/0xfa returned 0 after 280 usecs
calling  init_ipmi_si+0x0/0x78a @ 1
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x00000b,  prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: duplicate interface
ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16
IRQ 16/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
  Using irq 16
ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
initcall init_ipmi_si+0x0/0x78a returned 0 after 189204 usecs
calling  ipmi_wdog_init+0x0/0x12e @ 1
IPMI Watchdog: driver initialized
initcall ipmi_wdog_init+0x0/0x12e returned 0 after 6644 usecs
calling  ipmi_poweroff_init+0x0/0x8d @ 1
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
IPMI poweroff: ATCA Detect mfg 0xB prod 0x0
IPMI poweroff: Unable to find a poweroff function that will work, giving up
IPMI poweroff: ATCA Detect mfg 0xB prod 0x0
IPMI poweroff: Unable to find a poweroff function that will work, giving up
initcall ipmi_poweroff_init+0x0/0x8d returned 0 after 49545 usecs
calling  hangcheck_init+0x0/0x8e @ 1
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
initcall hangcheck_init+0x0/0x8e returned 0 after 565 usecs
calling  drm_core_init+0x0/0xf9 @ 1
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0xf9 returned 0 after 317 usecs
calling  r128_init+0x0/0x1e @ 1
initcall r128_init+0x0/0x1e returned 0 after 268 usecs
calling  radeon_init+0x0/0x1e @ 1
ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18
pci 0000:01:03.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18
[drm] Initialized radeon 1.29.0 20080528 on minor 0
initcall radeon_init+0x0/0x1e returned 0 after 3199 usecs
calling  via_init+0x0/0x23 @ 1
initcall via_init+0x0/0x23 returned 0 after 70 usecs
calling  cn_proc_init+0x0/0x3d @ 1
initcall cn_proc_init+0x0/0x3d returned 0 after 4 usecs
calling  serial8250_init+0x0/0x122 @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_init+0x0/0x122 returned 0 after 1461 usecs
calling  serial8250_pnp_init+0x0/0x12 @ 1
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_pnp_init+0x0/0x12 returned 0 after 778 usecs
calling  serial8250_pci_init+0x0/0x1b @ 1
initcall serial8250_pci_init+0x0/0x1b returned 0 after 215 usecs
calling  topology_sysfs_init+0x0/0x4e @ 1
initcall topology_sysfs_init+0x0/0x4e returned 0 after 55 usecs
calling  floppy_init+0x0/0xf1d @ 1
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
initcall floppy_init+0x0/0xf1d returned -19 after 2945766 usecs
calling  brd_init+0x0/0x167 @ 1
brd: module loaded
initcall brd_init+0x0/0x167 returned 0 after 4833 usecs
calling  bnx2_init+0x0/0x1b @ 1
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.9.0 (Dec 16, 2008)
ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
bnx2 0000:03:00.0: PCI INT A -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6
bnx2 0000:05:00.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4
initcall bnx2_init+0x0/0x1b returned 0 after 25485 usecs
calling  net_olddevs_init+0x0/0xa0 @ 1
initcall net_olddevs_init+0x0/0xa0 returned 0 after 7 usecs
calling  b44_init+0x0/0x64 @ 1
initcall b44_init+0x0/0x64 returned 0 after 192 usecs
calling  tun_init+0x0/0xa0 @ 1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
initcall tun_init+0x0/0xa0 returned 0 after 479 usecs
calling  init_netconsole+0x0/0x1bc @ 1
netconsole: local port 55813
netconsole: local IP 139.185.50.77
netconsole: interface eth0
netconsole: remote port 55813
netconsole: remote IP 139.185.50.76
netconsole: remote ethernet address 00:18:fe:34:1c:3d
netconsole: device eth0 not up yet, forcing it
bnx2 0000:03:00.0: irq 55 for MSI/MSI-X
bnx2: eth0: using MSI
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
bnx2: eth0 NIC SerDes Link is Down
bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x1bc returned 0 after 4317016 usecs
calling  scsi_tgt_init+0x0/0x82 @ 1
initcall scsi_tgt_init+0x0/0x82 returned 0 after 658 usecs
calling  raid_init+0x0/0x12 @ 1
initcall raid_init+0x0/0x12 returned 0 after 94 usecs
calling  spi_transport_init+0x0/0x2e @ 1
initcall spi_transport_init+0x0/0x2e returned 0 after 161 usecs
calling  fc_transport_init+0x0/0x4c @ 1
initcall fc_transport_init+0x0/0x4c returned 0 after 310 usecs
calling  iscsi_transport_init+0x0/0x14b @ 1
Loading iSCSI transport class v2.0-870.
initcall iscsi_transport_init+0x0/0x14b returned 0 after 566 usecs
calling  sas_transport_init+0x0/0xbb @ 1
initcall sas_transport_init+0x0/0xbb returned 0 after 662 usecs
calling  sas_class_init+0x0/0x31 @ 1
initcall sas_class_init+0x0/0x31 returned 0 after 51 usecs
calling  init_sd+0x0/0x10a @ 1
Driver 'sd' needs updating - please use bus_type methods
initcall init_sd+0x0/0x10a returned 0 after 458 usecs
calling  init_sg+0x0/0x15a @ 1
initcall init_sg+0x0/0x15a returned 0 after 138 usecs
calling  mon_init+0x0/0x103 @ 1
initcall mon_init+0x0/0x103 returned 0 after 301 usecs
calling  i8042_init+0x0/0x3a8 @ 1
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x3a8 returned 0 after 2609 usecs
calling  serport_init+0x0/0x34 @ 1
initcall serport_init+0x0/0x34 returned 0 after 1 usecs
calling  serio_raw_init+0x0/0x1b @ 1
initcall serio_raw_init+0x0/0x1b returned 0 after 148 usecs
calling  mousedev_init+0x0/0x61 @ 1
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x61 returned 0 after 347 usecs
calling  evdev_init+0x0/0x12 @ 1
initcall evdev_init+0x0/0x12 returned 0 after 15807 usecs
calling  atkbd_init+0x0/0x27 @ 1
initcall atkbd_init+0x0/0x27 returned 0 after 145 usecs
calling  psmouse_init+0x0/0x70 @ 1
initcall psmouse_init+0x0/0x70 returned 0 after 211 usecs
calling  pcspkr_init+0x0/0x12 @ 1
input: PC Speaker as /class/input/input1
initcall pcspkr_init+0x0/0x12 returned 0 after 29831 usecs
calling  uinput_init+0x0/0x12 @ 1
initcall uinput_init+0x0/0x12 returned 0 after 130 usecs
calling  cmos_init+0x0/0x4c @ 1
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
initcall cmos_init+0x0/0x4c returned 0 after 6055 usecs
calling  i2c_dev_init+0x0/0xa8 @ 1
i2c /dev entries driver
initcall i2c_dev_init+0x0/0xa8 returned 0 after 417 usecs
calling  amd756_init+0x0/0x1b @ 1
initcall amd756_init+0x0/0x1b returned 0 after 134 usecs
calling  i2c_amd8111_init+0x0/0x1b @ 1
initcall i2c_amd8111_init+0x0/0x1b returned 0 after 144 usecs
calling  i2c_i801_init+0x0/0x1b @ 1
initcall i2c_i801_init+0x0/0x1b returned 0 after 136 usecs
calling  nforce2_init+0x0/0x1b @ 1
initcall nforce2_init+0x0/0x1b returned 0 after 137 usecs
calling  i2c_piix4_init+0x0/0x1b @ 1
initcall i2c_piix4_init+0x0/0x1b returned 0 after 138 usecs
calling  i2c_vt586b_init+0x0/0x1b @ 1
initcall i2c_vt586b_init+0x0/0x1b returned 0 after 129 usecs
calling  i2c_vt596_init+0x0/0x1b @ 1
initcall i2c_vt596_init+0x0/0x1b returned 0 after 145 usecs
calling  coretemp_init+0x0/0x16c @ 1
initcall coretemp_init+0x0/0x16c returned -19 after 1 usecs
calling  k8temp_init+0x0/0x1b @ 1
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
initcall k8temp_init+0x0/0x1b returned 0 after 869 usecs
calling  sm_via686a_init+0x0/0x1b @ 1
initcall sm_via686a_init+0x0/0x1b returned 0 after 141 usecs
calling  vt1211_init+0x0/0x165 @ 1
initcall vt1211_init+0x0/0x165 returned -19 after 17 usecs
calling  sm_vt8231_init+0x0/0x1b @ 1
initcall sm_vt8231_init+0x0/0x1b returned 0 after 139 usecs
calling  watchdog_init+0x0/0xb4 @ 1
SoftDog: cannot register miscdev on minor=130 (err=-16)
initcall watchdog_init+0x0/0xb4 returned -16 after 187 usecs
initcall watchdog_init+0x0/0xb4 returned with error code -16 
calling  edac_init+0x0/0xa0 @ 1
EDAC MC: Ver: 2.1.0 Feb  8 2009
initcall edac_init+0x0/0xa0 returned 0 after 591 usecs
calling  i5000_init+0x0/0x37 @ 1
initcall i5000_init+0x0/0x37 returned 0 after 140 usecs
calling  e752x_init+0x0/0x37 @ 1
initcall e752x_init+0x0/0x37 returned 0 after 129 usecs
calling  i82975x_init+0x0/0x9d @ 1
initcall i82975x_init+0x0/0x9d returned -19 after 287 usecs
calling  cpufreq_stats_init+0x0/0x9e @ 1
initcall cpufreq_stats_init+0x0/0x9e returned 0 after 6 usecs
calling  cpufreq_gov_powersave_init+0x0/0x12 @ 1
initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 3 usecs
calling  cpufreq_gov_dbs_init+0x0/0x64 @ 1
initcall cpufreq_gov_dbs_init+0x0/0x64 returned 0 after 208 usecs
calling  cpufreq_gov_dbs_init+0x0/0x12 @ 1
initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 1 usecs
calling  init_ladder+0x0/0x12 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x12 returned 0 after 182 usecs
calling  hid_init+0x0/0x68 @ 1
initcall hid_init+0x0/0x68 returned 0 after 180 usecs
calling  hid_init+0x0/0x88 @ 1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
initcall hid_init+0x0/0x88 returned 0 after 883 usecs
calling  flow_cache_init+0x0/0x1bf @ 1
initcall flow_cache_init+0x0/0x1bf returned 0 after 73 usecs
calling  sysctl_ipv4_init+0x0/0x4e @ 1
initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 24 usecs
calling  ipip_init+0x0/0x71 @ 1
IPv4 over IPv4 tunneling driver
initcall ipip_init+0x0/0x71 returned 0 after 443 usecs
calling  ipgre_init+0x0/0xb3 @ 1
GRE over IPv4 tunneling driver
initcall ipgre_init+0x0/0xb3 returned 0 after 474 usecs
calling  init_syncookies+0x0/0x19 @ 1
initcall init_syncookies+0x0/0x19 returned 0 after 61 usecs
calling  ah4_init+0x0/0x68 @ 1
initcall ah4_init+0x0/0x68 returned 0 after 3 usecs
calling  esp4_init+0x0/0x68 @ 1
initcall esp4_init+0x0/0x68 returned 0 after 1 usecs
calling  ipcomp4_init+0x0/0x68 @ 1
initcall ipcomp4_init+0x0/0x68 returned 0 after 1 usecs
calling  ipip_init+0x0/0x68 @ 1
initcall ipip_init+0x0/0x68 returned 0 after 2 usecs
calling  xfrm4_beet_init+0x0/0x17 @ 1
initcall xfrm4_beet_init+0x0/0x17 returned 0 after 1 usecs
calling  tunnel4_init+0x0/0x32 @ 1
initcall tunnel4_init+0x0/0x32 returned 0 after 1 usecs
calling  xfrm4_transport_init+0x0/0x17 @ 1
initcall xfrm4_transport_init+0x0/0x17 returned 0 after 1 usecs
calling  xfrm4_mode_tunnel_init+0x0/0x17 @ 1
initcall xfrm4_mode_tunnel_init+0x0/0x17 returned 0 after 0 usecs
calling  inet_diag_init+0x0/0x69 @ 1
initcall inet_diag_init+0x0/0x69 returned 0 after 12 usecs
calling  tcp_diag_init+0x0/0x12 @ 1
initcall tcp_diag_init+0x0/0x12 returned 0 after 1 usecs
calling  bictcp_register+0x0/0x12 @ 1
TCP bic registered
initcall bictcp_register+0x0/0x12 returned 0 after 197 usecs
calling  xfrm_user_init+0x0/0x4d @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x4d returned 0 after 211 usecs
calling  packet_init+0x0/0x47 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x47 returned 0 after 216 usecs
calling  ipsec_pfkey_init+0x0/0x82 @ 1
NET: Registered protocol family 15
initcall ipsec_pfkey_init+0x0/0x82 returned 0 after 205 usecs
calling  init_sunrpc+0x0/0x5d @ 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
initcall init_sunrpc+0x0/0x5d returned 0 after 1052 usecs
calling  init_rpcsec_gss+0x0/0x4d @ 1
initcall init_rpcsec_gss+0x0/0x4d returned 0 after 17 usecs
calling  init_kerberos_module+0x0/0x2f @ 1
initcall init_kerberos_module+0x0/0x2f returned 0 after 6 usecs
calling  init_spkm3_module+0x0/0x2f @ 1
initcall init_spkm3_module+0x0/0x2f returned 0 after 2 usecs
calling  powernowk8_init+0x0/0x99 @ 1
powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 8218 processors (4 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0x12 (2600 MHz), vid 0x8
powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0xa
powernow-k8:    2 : fid 0xe (2200 MHz), vid 0xc
powernow-k8:    3 : fid 0xc (2000 MHz), vid 0xe
powernow-k8:    4 : fid 0xa (1800 MHz), vid 0x10
powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x12
powernow-k8:    0 : fid 0x12 (2600 MHz), vid 0x8
powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0xa
powernow-k8:    2 : fid 0xe (2200 MHz), vid 0xc
powernow-k8:    3 : fid 0xc (2000 MHz), vid 0xe
powernow-k8:    4 : fid 0xa (1800 MHz), vid 0x10
powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x12
initcall powernowk8_init+0x0/0x99 returned 0 after 3884 usecs
calling  acpi_cpufreq_init+0x0/0xd9 @ 1
initcall acpi_cpufreq_init+0x0/0xd9 returned -16 after 192 usecs
initcall acpi_cpufreq_init+0x0/0xd9 returned with error code -16 
calling  centrino_init+0x0/0x36 @ 1
initcall centrino_init+0x0/0x36 returned -19 after 1 usecs
calling  cpufreq_p4_init+0x0/0x63 @ 1
initcall cpufreq_p4_init+0x0/0x63 returned -19 after 0 usecs
calling  hpet_insert_resource+0x0/0x23 @ 1
initcall hpet_insert_resource+0x0/0x23 returned 0 after 3 usecs
calling  update_mp_table+0x0/0x492 @ 1
initcall update_mp_table+0x0/0x492 returned 0 after 1 usecs
calling  lapic_insert_resource+0x0/0x40 @ 1
initcall lapic_insert_resource+0x0/0x40 returned 0 after 1 usecs
calling  init_lapic_nmi_sysfs+0x0/0x39 @ 1
initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 170 usecs
calling  ioapic_insert_resources+0x0/0x4f @ 1
initcall ioapic_insert_resources+0x0/0x4f returned 0 after 4 usecs
calling  io_apic_bug_finalize+0x0/0x1b @ 1
initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 1 usecs
calling  check_early_ioremap_leak+0x0/0x65 @ 1
initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 1 usecs
calling  init_oops_id+0x0/0x31 @ 1
initcall init_oops_id+0x0/0x31 returned 0 after 7 usecs
calling  disable_boot_consoles+0x0/0x3a @ 1
initcall disable_boot_consoles+0x0/0x3a returned 0 after 1 usecs
calling  pm_qos_power_init+0x0/0x61 @ 1
initcall pm_qos_power_init+0x0/0x61 returned 0 after 429 usecs
calling  software_resume+0x0/0x157 @ 1
initcall software_resume+0x0/0x157 returned -2 after 1 usecs
initcall software_resume+0x0/0x157 returned with error code -2 
calling  debugfs_kprobe_init+0x0/0x89 @ 1
initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 14 usecs
calling  taskstats_init+0x0/0x95 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x95 returned 0 after 212 usecs
calling  max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
calling  random32_reseed+0x0/0xa3 @ 1
initcall random32_reseed+0x0/0xa3 returned 0 after 40 usecs
calling  pci_sysfs_init+0x0/0x4c @ 1
initcall pci_sysfs_init+0x0/0x4c returned 0 after 394 usecs
calling  acpi_wakeup_device_init+0x0/0xa0 @ 1
initcall acpi_wakeup_device_init+0x0/0xa0 returned 0 after 1 usecs
calling  acpi_sleep_proc_init+0x0/0x55 @ 1
initcall acpi_sleep_proc_init+0x0/0x55 returned 0 after 11 usecs
calling  seqgen_init+0x0/0xf @ 1
initcall seqgen_init+0x0/0xf returned 0 after 25 usecs
calling  scsi_complete_async_scans+0x0/0xea @ 1
initcall scsi_complete_async_scans+0x0/0xea returned 0 after 1 usecs
calling  rtc_hctosys+0x0/0x17b @ 1
rtc_cmos rtc_cmos: setting system clock to 2009-02-08 17:46:59 UTC (1234115219)
initcall rtc_hctosys+0x0/0x17b returned 0 after 237 usecs
calling  edd_init+0x0/0x2f1 @ 1
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
initcall edd_init+0x0/0x2f1 returned -19 after 400 usecs
calling  memmap_init+0x0/0xa7 @ 1
initcall memmap_init+0x0/0xa7 returned 0 after 80 usecs
calling  pci_mmcfg_late_insert_resources+0x0/0x157 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x157 returned 0 after 5 usecs
calling  tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 3 usecs
async_waiting @ 1
async_continuing @ 1 after 1 usec
Freeing unused kernel memory: 440k freed
Write protecting the kernel read-only data: 4944k
calling  uhci_hcd_init+0x0/0xc5 [uhci_hcd] @ 718
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 1
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: HCRESET not completed yet!
uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
initcall uhci_hcd_init+0x0/0xc5 [uhci_hcd] returned 0 after 2886 usecs
calling  ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] @ 723
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
initcall ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] returned 0 after 56352 usecs
calling  ehci_hcd_init+0x0/0x76 [ehci_hcd] @ 728
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
initcall ehci_hcd_init+0x0/0x76 [ehci_hcd] returned 0 after 15430 usecs
calling  cciss_init+0x0/0x2e [cciss] @ 733
HP CISS Driver (v 3.6.20)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54
cciss 0000:42:08.0: PCI INT A -> Link[LNKA] -> GSI 54 (level, high) -> IRQ 54
cciss 0000:42:08.0: irq 56 for MSI/MSI-X
IRQ 56/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 56 using DAC
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /class/input/input2
generic-usb 0003:03F0:1027.0001: input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /class/input/input3
generic-usb 0003:03F0:1027.0002: input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 7 ports detected
      blocks= 286677120 block_size= 512
      heads=255, sectors=32, cylinders=35132

      blocks= 286677120 block_size= 512
      heads=255, sectors=32, cylinders=35132

 cciss/c0d0: p1 p2 p3 p4
      blocks= 286677120 block_size= 512
      heads=255, sectors=32, cylinders=35132

      blocks= 286677120 block_size= 512
      heads=255, sectors=32, cylinders=35132

 cciss/c0d1: p1 p2
initcall cciss_init+0x0/0x2e [cciss] returned 0 after 6371699 usecs
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
modprobe used greatest stack depth: 3552 bytes left
calling  lpfc_init+0x0/0xd2 [lpfc] @ 1082
Emulex LightPulse Fibre Channel SCSI driver 8.3.0
Copyright(c) 2004-2008 Emulex.  All rights reserved.
lpfc 0000:08:00.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18
lpfc 0000:08:00.0: setting latency timer to 64
scsi0 :  on PCI bus 08 device 00 irq 18
calling  tg3_init+0x0/0x20 [tg3] @ 1545
lpfc 0000:08:00.0: irq 57 for MSI/MSI-X
BLKGRD allocated 1024 pages for _dump_buf_data at 0xffff880177000000
BLKGRD allocated 1024 pages for _dump_buf_dif at 0xffff880176c00000
tg3.c:v3.97 (December 10, 2008)
ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19
tg3 0000:07:04.0: PCI INT A -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19
tg3 0000:07:04.0: PME# disabled
eth2: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:2f
eth2: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0])
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth2: dma_rwctrl[76148000] dma_mask[40-bit]
lpfc 0000:08:00.1: PCI INT B -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19
lpfc 0000:08:00.1: setting latency timer to 64
scsi1 :  on PCI bus 08 device 01 irq 19
lpfc 0000:08:00.1: irq 58 for MSI/MSI-X
lpfc 0000:08:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x4 x2 x0 x0 0
BLKGRD already allocated _dump_buf_data=0xffff880177000000
BLKGRD already allocated _dump_buf_dif=0xffff880176c00000
initcall lpfc_init+0x0/0xd2 [lpfc] returned 0 after 4508460 usecs
tg3 0000:07:04.1: PCI INT B -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
tg3 0000:07:04.1: PME# disabled
eth3: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:30
eth3: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0])
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth3: dma_rwctrl[76148000] dma_mask[40-bit]
initcall tg3_init+0x0/0x20 [tg3] returned 0 after 4265383 usecs
scsi 0:0:0:0: RAID              COMPAQ   MSA1000          5.20 PQ: 0 ANSI: 4
scsi 0:0:0:0: Attached scsi generic sg0 type 12
scsi 0:0:1:0: RAID              COMPAQ   MSA1000          5.20 PQ: 0 ANSI: 4
scsi 0:0:1:0: Attached scsi generic sg1 type 12
scsi 0:0:1:8: Direct-Access     COMPAQ   MSA1000 VOLUME   5.20 PQ: 0 ANSI: 4
sd 0:0:1:8: [sda] 2187605616 512-byte hardware sectors: (1.12 TB/1.01 TiB)
sd 0:0:1:8: [sda] Write Protect is off
sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08
sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:8: [sda] 2187605616 512-byte hardware sectors: (1.12 TB/1.01 TiB)
sd 0:0:1:8: [sda] Write Protect is off
sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08
sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:1:8: [sda] Attached SCSI disk
sd 0:0:1:8: Attached scsi generic sg2 type 0
lpfc 0000:08:00.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x4 x2 x0 x0 0
calling  parport_default_proc_register+0x0/0x1b [parport] @ 2346
initcall parport_default_proc_register+0x0/0x1b [parport] returned 0 after 15 usecs
calling  lp_init_module+0x0/0x25f [lp] @ 2352
calling  parport_pc_init+0x0/0x34b [parport_pc] @ 2359
initcall parport_pc_init+0x0/0x34b [parport_pc] returned 0 after 584 usecs
lp: driver loaded but no devices found
initcall lp_init_module+0x0/0x25f [lp] returned 0 after 31384 usecs
scsi 1:0:0:0: RAID              COMPAQ   MSA1000          5.20 PQ: 0 ANSI: 4
scsi 1:0:0:0: Attached scsi generic sg3 type 12
scsi 1:0:0:8: Direct-Access     COMPAQ   MSA1000 VOLUME   5.20 PQ: 0 ANSI: 4
sd 1:0:0:8: [sdb] 2187605616 512-byte hardware sectors: (1.12 TB/1.01 TiB)
sd 1:0:0:8: [sdb] Write Protect is off
sd 1:0:0:8: [sdb] Mode Sense: 83 00 00 08
sd 1:0:0:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:8: [sdb] 2187605616 512-byte hardware sectors: (1.12 TB/1.01 TiB)
sd 1:0:0:8: [sdb] Write Protect is off
sd 1:0:0:8: [sdb] Mode Sense: 83 00 00 08
sd 1:0:0:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:8: [sdb] Attached SCSI disk
sd 1:0:0:8: Attached scsi generic sg4 type 0
scsi 1:0:1:0: RAID              COMPAQ   MSA1000          5.20 PQ: 0 ANSI: 4
scsi 1:0:1:0: Attached scsi generic sg5 type 12
EXT3 FS on cciss/c0d0p3, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on cciss/c0d0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on cciss/c0d1p1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on cciss/c0d1p2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
Adding 8385920k swap on /dev/cciss/c0d0p2.  Priority:-1 extents:1 across:8385920k 
rc.sysinit used greatest stack depth: 3536 bytes left
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
 rport-0:0-13: blocked FC remote port time out: removing rport
 rport-1:0-14: blocked FC remote port time out: removing rport
calling  init_hpqci+0x0/0x22d [hpilof] @ 5528
hpqci 0000:01:04.2: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
IRQ 17/hpqci: IRQF_DISABLED is not guaranteed on shared IRQs
initcall init_hpqci+0x0/0x22d [hpilof] returned 0 after 649 usecs
6-1.test[15383]: segfault at 2713 ip 000000338ac04c36 sp 00007fffe39df3a0 error 4 in librt-2.5.so[338ac00000+7000]
12-1.test[15511]: segfault at 2713 ip 000000338ac04c84 sp 00007fffe04a4e70 error 4 in librt-2.5.so[338ac00000+7000]
5-1.test[21016]: segfault at 601000 ip 000000338b00acd2 sp 00007fff2794e328 error 6 in libpthread-2.5.so[338b000000+15000]
6-2.test[22562]: segfault at 2af068e5e000 ip 0000000000400b3c sp 00007fff41c4d550 error 4 in 6-2.test[400000+2000]
6-1.test[22591]: segfault at 2ad38c040000 ip 0000000000400aa7 sp 00007fff1ea69370 error 6 in 6-1.test[400000+1000]
6-3.test[22720]: segfault at 2b442fe7b000 ip 0000000000400aee sp 00007fff7ac2e530 error 6 in 6-3.test[400000+1000]
5-1.test[23389]: segfault at 186a3 ip 000000338ac04b59 sp 00007fff97aee4d0 error 4 in librt-2.5.so[338ac00000+7000]
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=4443687797943, hangcheck_tsc=4180869793825, tsc_diff=262818004118
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=4886887918623, hangcheck_tsc=4443689195619, tsc_diff=443198723004
2-2.test[25892]: segfault at 3a00000000 ip 0000003a00000000 sp 00007fff23ccd6e0 error 14 in ld-2.5.so[3a93400000+1a000]
2-3.test[26727]: segfault at 3a00000000 ip 0000003a00000000 sp 00007fff9ea5b470 error 14 in ld-2.5.so[3a93400000+1a000]
3-2.test[28227]: segfault at 404cefe8 ip 0000003a938961e0 sp 00000000404cf008 error 6 in libc-2.5.so[3a93800000+144000]
3-2.test[28229]: segfault at 419a2fe8 ip 0000003a938961e0 sp 00000000419a3008 error 6 in libc-2.5.so[3a93800000+144000]
3-2.test[28231]: segfault at 41544fe8 ip 0000003a938961e0 sp 0000000041545008 error 6 in libc-2.5.so[3a93800000+144000]
3-2.test[28233]: segfault at 4030bfe8 ip 0000003a938961e0 sp 000000004030c008 error 6 in libc-2.5.so[3a93800000+144000]
3-2.test[28235]: segfault at 41888fe8 ip 0000003a938961e0 sp 0000000041889008 error 6 in libc-2.5.so[3a93800000+144000]
1-5.test[28350]: segfault at 41b7cfe8 ip 0000003a938961e0 sp 0000000041b7d008 error 6 in libc-2.5.so[3a93800000+144000]
1-5.test[28355]: segfault at 408b3fe8 ip 0000003a938961e0 sp 00000000408b4008 error 6 in libc-2.5.so[3a93800000+144000]
6-1.test[30019]: segfault at 2713 ip 000000338ac04be6 sp 00007ffff891f300 error 4 in librt-2.5.so[338ac00000+7000]
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=5548008296502, hangcheck_tsc=5291921480306, tsc_diff=256086816196
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=5926175566586, hangcheck_tsc=5548009695978, tsc_diff=378165870608
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=6254232266430, hangcheck_tsc=5926176961904, tsc_diff=328055304526
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=6540416520781, hangcheck_tsc=6254232846538, tsc_diff=286183674243
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=7232212277113, hangcheck_tsc=6763504063293, tsc_diff=468708213820
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=7689965658523, hangcheck_tsc=7232213609812, tsc_diff=457752048711
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=7982329350773, hangcheck_tsc=7689966204710, tsc_diff=292363146063
warning: process `scrashme' used the deprecated sysctl system call with 
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=9414550901771, hangcheck_tsc=9132372282561, tsc_diff=282178619210
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=9891357786822, hangcheck_tsc=9601043777005, tsc_diff=290314009817
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=10310466476843, hangcheck_tsc=9891359195518, tsc_diff=419107281325
sadc used greatest stack depth: 3296 bytes left
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=10636569106328, hangcheck_tsc=10310467871389, tsc_diff=326101234939
calling  init_jfs_fs+0x0/0x1cd [jfs] @ 19005
JFS: nTxBlock = 8192, nTxLock = 65536
initcall init_jfs_fs+0x0/0x1cd [jfs] returned 0 after 5998 usecs
calling  init_xfs_fs+0x0/0xa4 [xfs] @ 19831
SGI XFS with security attributes, large block/inode numbers, no debug enabled
initcall init_xfs_fs+0x0/0xa4 [xfs] returned 0 after 1430 usecs
Filesystem "cciss/c0d0p4": Disabling barriers, trial barrier write failed
XFS mounting filesystem cciss/c0d0p4
Ending clean XFS mount for filesystem: cciss/c0d0p4
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=11684398697141, hangcheck_tsc=11368673431168, tsc_diff=315725265973
fsx-linux used greatest stack depth: 2976 bytes left
end_request: I/O error, dev cciss/c0d0, sector 0
calling  init_xfs_fs+0x0/0xa4 [xfs] @ 20271
SGI XFS with security attributes, large block/inode numbers, no debug enabled
initcall init_xfs_fs+0x0/0xa4 [xfs] returned 0 after 1696 usecs
Filesystem "cciss/c0d0p4": Disabling barriers, trial barrier write failed
XFS mounting filesystem cciss/c0d0p4
Ending clean XFS mount for filesystem: cciss/c0d0p4
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=12000139786717, hangcheck_tsc=11684399666610, tsc_diff=315740120107
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=12325611526265, hangcheck_tsc=12000140764953, tsc_diff=325470761312
end_request: I/O error, dev cciss/c0d0, sector 0
calling  init_xfs_fs+0x0/0xa4 [xfs] @ 20710
SGI XFS with security attributes, large block/inode numbers, no debug enabled
initcall init_xfs_fs+0x0/0xa4 [xfs] returned 0 after 1728 usecs
Filesystem "cciss/c0d0p4": Disabling barriers, trial barrier write failed
XFS mounting filesystem cciss/c0d0p4
Ending clean XFS mount for filesystem: cciss/c0d0p4
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=12628159968359, hangcheck_tsc=12325612529240, tsc_diff=302547439119
end_request: I/O error, dev cciss/c0d0, sector 0
calling  init_reiserfs_fs+0x0/0x84 [reiserfs] @ 21181
initcall init_reiserfs_fs+0x0/0x84 [reiserfs] returned 0 after 171 usecs
ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p4: using ordered data mode
ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4)
ReiserFS: cciss/c0d0p4: Using r5 hash to sort names
calling  init_reiserfs_fs+0x0/0x84 [reiserfs] @ 21310
initcall init_reiserfs_fs+0x0/0x84 [reiserfs] returned 0 after 174 usecs
ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p4: using journaled data mode
ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4)
ReiserFS: cciss/c0d0p4: Using r5 hash to sort names
calling  init_reiserfs_fs+0x0/0x84 [reiserfs] @ 21441
initcall init_reiserfs_fs+0x0/0x84 [reiserfs] returned 0 after 165 usecs
ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p4: using writeback data mode
ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4)
ReiserFS: cciss/c0d0p4: Using r5 hash to sort names
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=13096392399144, hangcheck_tsc=12845040220821, tsc_diff=251352178323
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=13532399025606, hangcheck_tsc=13277209951491, tsc_diff=255189074115
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=13866739884498, hangcheck_tsc=13532400410416, tsc_diff=334339474082
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=14259078531668, hangcheck_tsc=13866754341583, tsc_diff=392324190085
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=14634118913450, hangcheck_tsc=14259079907847, tsc_diff=375039005603
kjournald starting.  Commit interval 5 seconds
EXT3 FS on cciss/c0d0p4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=15397208784709, hangcheck_tsc=14995753979901, tsc_diff=401454804808
kjournald starting.  Commit interval 5 seconds
EXT3 FS on cciss/c0d0p4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=16163132941575, hangcheck_tsc=15758843884231, tsc_diff=404289057344
kjournald starting.  Commit interval 5 seconds
EXT3 FS on cciss/c0d0p4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=16518862388944, hangcheck_tsc=16163133514891, tsc_diff=355728874053
kjournald starting.  Commit interval 5 seconds
EXT3 FS on cciss/c0d0p4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=16849666749918, hangcheck_tsc=16518863760811, tsc_diff=330802989107
kjournald starting.  Commit interval 5 seconds
EXT3 FS on cciss/c0d0p4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=17245709785486, hangcheck_tsc=16849668128511, tsc_diff=396041656975
kjournald starting.  Commit interval 5 seconds
EXT3 FS on cciss/c0d0p4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=17642283825870, hangcheck_tsc=17245711160453, tsc_diff=396572665417
calling  ocfs2_stack_glue_init+0x0/0x95 [ocfs2_stackglue] @ 25038
initcall ocfs2_stack_glue_init+0x0/0x95 [ocfs2_stackglue] returned 0 after 27 usecs
calling  init_o2nm+0x0/0x9b [ocfs2_nodemanager] @ 25038
OCFS2 Node Manager 1.5.0
initcall init_o2nm+0x0/0x9b [ocfs2_nodemanager] returned 0 after 414 usecs
calling  journal_init+0x0/0xae [jbd2] @ 25038
initcall journal_init+0x0/0xae [jbd2] returned 0 after 230 usecs
calling  ocfs2_init+0x0/0x333 [ocfs2] @ 25038
OCFS2 1.5.0
initcall ocfs2_init+0x0/0x333 [ocfs2] returned 0 after 790 usecs
JBD: Ignoring recovery information on journal
kjournald2 starting: pid 25081, dev cciss!c0d0p4:43, commit interval 5 seconds
ocfs2: Mounting device (104,4) on (node local, slot 0) with ordered data mode.
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=18016406858530, hangcheck_tsc=17642285196226, tsc_diff=374121662304
fsx-linux[25125]: segfault at 4e2a312 ip 0000003a93875330 sp 00007fff1275b0a8 error 4 in libc-2.5.so[3a93800000+144000]
ocfs2: Unmounting device (104,4) on (node local)
calling  ocfs2_init+0x0/0x333 [ocfs2] @ 25348
OCFS2 1.5.0
initcall ocfs2_init+0x0/0x333 [ocfs2] returned 0 after 849 usecs
JBD: Ignoring recovery information on journal
kjournald2 starting: pid 25368, dev cciss!c0d0p4:27, commit interval 5 seconds
ocfs2: Mounting device (104,4) on (node local, slot 0) with ordered data mode.
fsx-linux[25412]: segfault at 4f3705a ip 0000003a93875330 sp 00007fff9705f9a8 error 4 in libc-2.5.so[3a93800000+144000]
ocfs2: Unmounting device (104,4) on (node local)
calling  ocfs2_init+0x0/0x333 [ocfs2] @ 25521
OCFS2 1.5.0
initcall ocfs2_init+0x0/0x333 [ocfs2] returned 0 after 794 usecs
JBD: Ignoring recovery information on journal
kjournald2 starting: pid 25540, dev cciss!c0d0p4:19, commit interval 5 seconds
ocfs2: Mounting device (104,4) on (node local, slot 0) with ordered data mode.
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=18351540119735, hangcheck_tsc=18016407427799, tsc_diff=335132691936
fsx-linux[25585]: segfault at 35e6902 ip 0000003a93875330 sp 00007fff23f03858 error 4 in libc-2.5.so[3a93800000+144000]
ocfs2: Unmounting device (104,4) on (node local)
Hangcheck: hangcheck value past margin!
Hangcheck: cur_tsc=18696688473514, hangcheck_tsc=18351541536691, tsc_diff=345146936823