========== hostname -s: ========== ca-ostest293 ========== domainname: ========== us.oracle.com ========== uname -a: ========== Linux ca-ostest293.us.oracle.com 2.6.27-rc3-git6 #1 SMP Tue Aug 19 11:01:01 PDT 2008 x86_64 x86_64 x86_64 GNU/Linux ========== df -Th: ========== Filesystem Type Size Used Avail Use% Mounted on /dev/cciss/c0d0p3 ext3 49G 9.8G 37G 22% / /dev/cciss/c0d0p1 ext3 251M 88M 151M 37% /boot tmpfs tmpfs 7.9G 0 7.9G 0% /dev/shm /dev/cciss/c0d1p1 ext3 48G 6.6G 39G 15% /home /dev/cciss/c0d1p2 ext3 87G 16G 67G 19% /opt ca-ostest292:/cruc/packages nfs 49G 31G 16G 67% /cruc/packages ca-ostest292:/cruc/plans nfs 49G 31G 16G 67% /cruc/plans ca-ostest292:/cruc/runs nfs 49G 31G 16G 67% /cruc/runs ca-ostest292:/cruc/suts nfs 49G 31G 16G 67% /cruc/suts ca-ostest292:/cruc/usr nfs 49G 31G 16G 67% /cruc/usr ca-ostest292:/cruc/etc nfs 49G 31G 16G 67% /cruc/etc ca-ostest292:/cruc nfs 49G 31G 16G 67% /cruc /dev/sda1 ext3 470G 96G 351G 22% /storage ========== mount: ========== /dev/cciss/c0d0p3 on / type ext3 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/cciss/c0d0p1 on /boot type ext3 (rw) tmpfs on /dev/shm type tmpfs (rw,size=8396185600) /dev/cciss/c0d1p1 on /home type ext3 (rw,noatime,data=writeback) /dev/cciss/c0d1p2 on /opt type ext3 (rw,noatime,data=writeback) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) ca-ostest292:/cruc/packages on /cruc/packages type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76) ca-ostest292:/cruc/plans on /cruc/plans type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76) ca-ostest292:/cruc/runs on /cruc/runs type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76) ca-ostest292:/cruc/suts on /cruc/suts type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76) ca-ostest292:/cruc/usr on /cruc/usr type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76) ca-ostest292:/cruc/etc on /cruc/etc type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76) ca-ostest292:/cruc on /cruc type nfs (rw,bg,nfsvers=3,tcp,hard,intr,addr=139.185.50.76) /dev/sda1 on /storage type ext3 (rw) ========== lsmod: ========== Module Size Used by parport_pc 27944 0 lp 12868 0 parport 37040 2 parport_pc,lp tg3 115844 0 lpfc 239476 1 cciss 36104 7 ehci_hcd 33164 0 ohci_hcd 23452 0 uhci_hcd 22432 0 ========== lshw: ========== /cruc/usr/bin/sut_sysinfo: line 11: lshw: command not found ========== lspci -vvv: ========== 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4149 Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 3 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 8, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4151 Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 2 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 4, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4159 Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 1 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 2, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4161 Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 1, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0 Link: Latency L0s <4us, L1 <4us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Capabilities: [90] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [100] Advanced Error Reporting Capabilities: [14c] Power Budgeting Capabilities: [160] Device Serial Number f6-26-35-fe-ff-fe-18-00 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12) Subsystem: Hewlett-Packard Company NC373i Integrated Multifunction Gigabit Server Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0 Link: Latency L0s <4us, L1 <4us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Capabilities: [90] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=04:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [100] Advanced Error Reporting Capabilities: [14c] Power Budgeting Capabilities: [160] Device Serial Number f4-26-35-fe-ff-fe-18-00 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12) Subsystem: Hewlett-Packard Company NC373i Integrated Multifunction Gigabit Server Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <4us, L1 <16us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0 Link: Latency L0s <4us, L1 <4us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Capabilities: [90] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=06:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Advanced Error Reporting Capabilities: [14c] Power Budgeting 07:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5715S Gigabit Ethernet (rev a3) Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4169 Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 2 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 4, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting 40:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4171 Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 1 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 2, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting 40:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4179 Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 1, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Virtual Channel Capabilities: [160] Advanced Error Reporting 41:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <4us, L1 <16us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0 Link: Latency L0s <4us, L1 <4us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Capabilities: [90] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=41:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Advanced Error Reporting Capabilities: [14c] Power Budgeting 42:04.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (rev b2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [90] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=42:04.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=8 CommitmentLimit=8 Downstream: Capacity=8 CommitmentLimit=8 42:08.0 RAID bus controller: Hewlett-Packard Company Unknown device 3238 Subsystem: Hewlett-Packard Company Unknown device 3211 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- /dev/null || /cruc/usr/bin/sut_dispatcher >/cruc/suts/ca-ostest293/sut.log root 5094 0.0 0.0 63976 1224 ? S 04:04 0:00 /bin/bash -l /cruc/usr/bin/sut_dispatcher smmsp 5194 0.0 0.0 50976 3168 ? S 04:04 0:00 /usr/sbin/sendmail -FCronDaemon -i -odi -oem -oi -t root 5682 0.2 0.0 0 0 ? S< 04:09 1:52 [kjournald] root 11903 0.0 0.0 63976 1160 ? S 19:23 0:00 /bin/bash /cruc/runs/4871/RUNNING/ca-ostest293/100-save_sysinfo root 11907 0.0 0.0 63976 1084 ? S 19:23 0:00 /bin/bash /cruc/usr/bin/sut_sysinfo root 11918 0.0 0.0 65744 968 ? R 19:23 0:00 ps auxw root 14286 0.0 0.0 64400 268 ? Ss 14:44 0:00 rpc.rquotad root 14289 0.0 0.0 0 0 ? S< 14:44 0:00 [nfsd] root 14290 0.0 0.0 0 0 ? S< 14:44 0:00 [nfsd] root 14291 0.0 0.0 0 0 ? S< 14:44 0:00 [nfsd] root 14292 0.0 0.0 0 0 ? S< 14:44 0:00 [nfsd] root 14293 0.0 0.0 0 0 ? S< 14:44 0:00 [nfsd] root 14294 0.0 0.0 0 0 ? S< 14:44 0:00 [nfsd] root 14295 0.0 0.0 0 0 ? S< 14:44 0:00 [nfsd] root 14296 0.0 0.0 0 0 ? S< 14:44 0:00 [nfsd] root 14299 0.0 0.0 8064 724 ? Ss 14:44 0:00 rpc.mountd root 22123 0.0 0.0 0 0 ? S 10:03 0:00 [pdflush] ========== chkconfig -l: ========== -l: unknown option ========== ifconfig: ========== eth0 Link encap:Ethernet HWaddr 00:18:FE:35:26:F6 inet addr:139.185.50.77 Bcast:139.185.51.255 Mask:255.255.252.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:107657 errors:0 dropped:0 overruns:0 frame:0 TX packets:84212 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:16203973 (15.4 MiB) TX bytes:38244596 (36.4 MiB) Interrupt:17 Memory:f8000000-f8012700 eth2 Link encap:Ethernet HWaddr 00:18:FE:34:1C:2F UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37184 errors:0 dropped:0 overruns:0 frame:0 TX packets:167 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3348379 (3.1 MiB) TX bytes:12380 (12.0 KiB) Interrupt:19 eth3 Link encap:Ethernet HWaddr 00:18:FE:34:1C:30 inet addr:139.185.48.115 Bcast:139.185.51.255 Mask:255.255.252.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3129 errors:0 dropped:0 overruns:0 frame:0 TX packets:72 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:253723 (247.7 KiB) TX bytes:8127 (7.9 KiB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:725148 errors:0 dropped:0 overruns:0 frame:0 TX packets:725148 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:103263487 (98.4 MiB) TX bytes:103263487 (98.4 MiB) ========== showmount: ========== Hosts on ca-ostest293.us.oracle.com: * 139.185.50.77 ========== rpcinfo -p: ========== program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 711 status 100024 1 tcp 714 status 100021 1 tcp 48885 nlockmgr 100021 3 tcp 48885 nlockmgr 100021 4 tcp 48885 nlockmgr 100011 1 udp 895 rquotad 100011 2 udp 895 rquotad 100011 1 tcp 898 rquotad 100011 2 tcp 898 rquotad 100021 1 udp 59054 nlockmgr 100021 3 udp 59054 nlockmgr 100021 4 udp 59054 nlockmgr 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100005 1 udp 907 mountd 100005 1 tcp 910 mountd 100005 2 udp 907 mountd 100005 2 tcp 910 mountd 100005 3 udp 907 mountd 100005 3 tcp 910 mountd ========== exportfs -v: ========== /nas_fs/nas_fs1 (ro,wdelay,root_squash,no_subtree_check,anonuid=65534,anongid=65534) /nas_fs (rw,wdelay,root_squash,no_subtree_check,anonuid=65534,anongid=65534) ========== netstat: ========== Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 ca-ostest293.us.oracle.:740 ca-ostest292.us.oracle.:nfs ESTABLISHED tcp 0 0 localhost.localdomain:58798 localhost.localdomain:ssh TIME_WAIT tcp 0 0 localhost.localdomain:58799 localhost.localdomain:ssh TIME_WAIT tcp 0 0 localhost.localdomain:58797 localhost.localdomain:ssh TIME_WAIT tcp 0 0 localhost.localdomain:obex localhost.localdomai:sunrpc TIME_WAIT tcp 0 0 localhost.localdomain:58796 localhost.localdomain:ssh TIME_WAIT tcp 0 0 ca-ostest293.us.:cadview-3d ca-ostest293.us.oracle.:910 TIME_WAIT tcp 0 0 localhost.localdomain:58785 localhost.localdomain:ssh TIME_WAIT tcp 0 0 ca-ostest293.us.oracl:15586 ca-ostest293.us.orac:sunrpc TIME_WAIT tcp 0 0 localhost.localdomain:58800 localhost.localdomain:ssh TIME_WAIT Active UNIX domain sockets (w/o servers) Proto RefCnt Flags Type State I-Node Path unix 18 [ ] DGRAM 7442 /dev/log unix 2 [ ] DGRAM 570 @/org/kernel/udev/udevd unix 2 [ ] DGRAM 9628 @/org/freedesktop/hal/udev_event unix 2 [ ] DGRAM 522634 unix 2 [ ] DGRAM 256152 unix 2 [ ] DGRAM 11056 unix 2 [ ] DGRAM 11032 unix 3 [ ] STREAM CONNECTED 9737 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 9736 unix 3 [ ] STREAM CONNECTED 9699 @/var/run/hald/dbus-JCt1C4YJ7u unix 3 [ ] STREAM CONNECTED 9696 unix 3 [ ] STREAM CONNECTED 9684 @/var/run/hald/dbus-JCt1C4YJ7u unix 3 [ ] STREAM CONNECTED 9681 unix 3 [ ] STREAM CONNECTED 9660 /var/run/acpid.socket unix 3 [ ] STREAM CONNECTED 9659 unix 3 [ ] STREAM CONNECTED 9653 @/var/run/hald/dbus-JCt1C4YJ7u unix 3 [ ] STREAM CONNECTED 9649 unix 3 [ ] STREAM CONNECTED 9652 @/var/run/hald/dbus-JCt1C4YJ7u unix 3 [ ] STREAM CONNECTED 9647 unix 3 [ ] STREAM CONNECTED 9623 @/var/run/hald/dbus-yP0N37XZBY unix 3 [ ] STREAM CONNECTED 9622 unix 3 [ ] STREAM CONNECTED 9579 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 9578 unix 3 [ ] STREAM CONNECTED 9573 unix 3 [ ] STREAM CONNECTED 9572 unix 2 [ ] DGRAM 9570 unix 3 [ ] STREAM CONNECTED 9560 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 9559 unix 2 [ ] DGRAM 9538 unix 2 [ ] DGRAM 9496 unix 2 [ ] DGRAM 8593 unix 2 [ ] DGRAM 8547 unix 2 [ ] DGRAM 8511 unix 2 [ ] DGRAM 8476 unix 2 [ ] DGRAM 8450 unix 2 [ ] DGRAM 8131 unix 3 [ ] STREAM CONNECTED 7826 unix 3 [ ] STREAM CONNECTED 7825 unix 2 [ ] DGRAM 7634 unix 2 [ ] DGRAM 7586 unix 2 [ ] DGRAM 7450 unix 3 [ ] STREAM CONNECTED 7402 unix 3 [ ] STREAM CONNECTED 7401 ========== nfsstat: ========== Server rpc stats: calls badcalls badauth badclnt xdrcall 2 0 0 0 0 Server nfs v3: null getattr setattr lookup access readlink 2 100% 0 0% 0 0% 0 0% 0 0% 0 0% read write create mkdir symlink mknod 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% remove rmdir rename link readdir readdirplus 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% fsstat fsinfo pathconf commit 0 0% 0 0% 0 0% 0 0% Client rpc stats: calls retrans authrefrsh 41314 0 0 Client nfs v3: null getattr setattr lookup access readlink 0 0% 12774 30% 9 0% 776 1% 5545 13% 0 0% read write create mkdir symlink mknod 43 0% 11067 26% 6 0% 4 0% 0 0% 0 0% remove rmdir rename link readdir readdirplus 0 0% 0 0% 16 0% 0 0% 0 0% 30 0% fsstat fsinfo pathconf commit 14 0% 14 0% 0 0% 11015 26% ========== dmesg -s 1000000: ========== Linux version 2.6.27-rc3-git6 (root@ca-ostest293.us.oracle.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Tue Aug 19 11:01:01 PDT 2008 Command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54871@139.185.50.77/eth0,54871@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe50000 (usable) BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data) BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000027ffff000 (usable) debug: ignoring loglevel setting. last_pfn = 0x27ffff max_arch_pfn = 0x3ffffffff last_pfn = 0x7fe50 max_arch_pfn = 0x3ffffffff init_memory_mapping 0000000000 - 007fe00000 page 2M 007fe00000 - 007fe50000 page 4k kernel direct mapping tables up to 7fe50000 @ 8000-c000 last_map_addr: 7fe50000 end: 7fe50000 init_memory_mapping 0100000000 - 027fe00000 page 2M 027fe00000 - 027ffff000 page 4k kernel direct mapping tables up to 27ffff000 @ a000-16000 last_map_addr: 27ffff000 end: 27ffff000 RAMDISK: 7fd05000 - 7fe4f878 DMI 2.3 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT 7FE50780, 005C (r1 HP A08 2 Ò 162E) ACPI: FACP 7FE50800, 00F4 (r3 HP A08 2 Ò 162E) ACPI: DSDT 7FE50900, 3F75 (r1 HP DSDT 1 INTL 20030228) ACPI: FACS 7FE50100, 0040 ACPI: SPCR 7FE50140, 0050 (r1 HP SPCRRBSU 1 Ò 162E) ACPI: MCFG 7FE501C0, 003C (r1 HP ProLiant 1 0) ACPI: HPET 7FE50200, 0038 (r1 HP A08 2 Ò 162E) ACPI: SPMI 7FE50240, 0040 (r5 HP ProLiant 1 Ò 162E) ACPI: APIC 7FE50280, 00DE (r1 HP 00000083 2 0) ACPI: SRAT 7FE50380, 0110 (r1 AMD HAMMER 1 AMD 1) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-80000000 SRAT: Node 0 PXM 0 100000000-180000000 SRAT: Node 1 PXM 1 180000000-280000000 NUMA: Allocated memnodemap from 11000 - 16080 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000180000000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [0000000000017000 - 0000000000046fff] pages 30 (8 early reservations) ==> bootmem [0000000000 - 0180000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000086a4d0] TEXT DATA BSS ==> [0000200000 - 000086a4d0] #3 [007fd05000 - 007fe4f878] RAMDISK ==> [007fd05000 - 007fe4f878] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #6 [000000a000 - 0000011000] PGTABLE ==> [000000a000 - 0000011000] #7 [0000011000 - 0000016080] MEMNODEMAP ==> [0000011000 - 0000016080] Bootmem setup node 1 0000000180000000-000000027ffff000 NODE_DATA [0000000180000000 - 0000000180003fff] bootmap [0000000180004000 - 0000000180023fff] pages 20 (8 early reservations) ==> bootmem [0180000000 - 027ffff000] #0 [0000000000 - 0000001000] BIOS data page #1 [0000006000 - 0000008000] TRAMPOLINE #2 [0000200000 - 000086a4d0] TEXT DATA BSS #3 [007fd05000 - 007fe4f878] RAMDISK #4 [000009f400 - 0000100000] BIOS reserved #5 [0000008000 - 000000a000] PGTABLE #6 [000000a000 - 0000011000] PGTABLE #7 [0000011000 - 0000016080] MEMNODEMAP found SMP MP-table at [ffff8800000f4f80] 000f4f80 [ffffe20000000000-ffffe200053fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0 [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0027ffff Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007fe50 0: 0x00100000 -> 0x00180000 1: 0x00180000 -> 0x0027ffff On node 0 totalpages: 1048046 DMA zone: 2185 pages, LIFO batch:0 DMA32 zone: 505480 pages, LIFO batch:31 Normal zone: 517120 pages, LIFO batch:31 On node 1 totalpages: 1048575 Normal zone: 1034239 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xf7df0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38]) IOAPIC[1]: apic_id 9, version 0, address 0xfdef0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10228201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000 PM: Registered nosave memory: 000000007fe58000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) PERCPU: Allocating 47784 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 2 Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2059024 Policy zone: Normal Kernel command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54871@139.185.50.77/eth0,54871@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Detected 1004.624 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Node 0: aperture @ c000000 size 64 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 8197680k/10485756k available (3435k kernel code, 188804k reserved, 1713k data, 396k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 2009.24 BogoMIPS (lpj=4018496) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12557801 Detected 12.557 MHz APIC timer. Booting processor 1/2 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2009.35 BogoMIPS (lpj=4018703) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 2/1 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 2009.42 BogoMIPS (lpj=4018843) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 3/3 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 2009.38 BogoMIPS (lpj=4018768) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Brought up 4 CPUs Total of 4 processors activated (8037.40 BogoMIPS). khelper used greatest stack depth: 6008 bytes left net_namespace: 592 bytes NET: Registered protocol family 16 node 0 link 1: io port [1000, 3fff] node 1 link 2: io port [4000, ffff] TOM: 0000000080000000 aka 2048M node 0 link 1: mmio [e8000000, fddfffff] node 1 link 2: mmio [fde00000, fdffffff] node 0 link 1: mmio [80000000, 83ffffff] node 1 link 2: mmio [84000000, 8fffffff] node 0 link 1: mmio [a0000, bffff] TOM2: 0000000280000000 aka 10240M bus: [00,3f] on node 0 link 1 bus: 00 index 0 io port: [0, 3fff] bus: 00 index 1 mmio: [90000000, fddfffff] bus: 00 index 2 mmio: [80000000, 83ffffff] bus: 00 index 3 mmio: [a0000, bffff] bus: 00 index 4 mmio: [fe000000, ffffffff] bus: 00 index 5 mmio: [280000000, fcffffffff] bus: [40,ff] on node 1 link 2 bus: 40 index 0 io port: [4000, ffff] bus: 40 index 1 mmio: [fde00000, fdffffff] bus: 40 index 2 mmio: [84000000, 8fffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort. ACPI: EC: Look up EC in DSDT ACPI: SSDT 7FE58000, 04F0 (r2 HP PNOWSSDT 2 HP 1) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 PCI: MCFG area at 80000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at 80000000 - 8fffffff ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: supports D1 pci 0000:00:02.0: supports D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: supports D1 pci 0000:00:02.1: supports D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled pci 0000:01:03.0: supports D1 pci 0000:01:03.0: supports D2 pci 0000:01:04.0: PME# supported from D0 D3hot D3cold pci 0000:01:04.0: PME# disabled pci 0000:01:04.2: PME# supported from D0 D3hot D3cold pci 0000:01:04.2: PME# disabled pci 0000:01:04.4: PME# supported from D0 D3hot D3cold pci 0000:01:04.4: PME# disabled pci 0000:01:04.6: PME# supported from D0 D3hot D3cold pci 0000:01:04.6: PME# disabled pci 0000:00:09.0: transparent bridge pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:07:04.0: PME# supported from D3hot D3cold pci 0000:07:04.0: PME# disabled pci 0000:07:04.1: PME# supported from D3hot D3cold pci 0000:07:04.1: PME# disabled ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0c.0: PME# disabled pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0d.0: PME# disabled pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0e.0: PME# disabled pci 0000:41:00.0: PME# supported from D0 D3hot D3cold pci 0000:41:00.0: PME# disabled pci 0000:42:08.0: supports D1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT] ACPI: PCI Interrupt Link [LNKW] (IRQs *16) ACPI: PCI Interrupt Link [LNKX] (IRQs *17) ACPI: PCI Interrupt Link [LNKY] (IRQs *18) ACPI: PCI Interrupt Link [LNKZ] (IRQs *19) ACPI: PCI Interrupt Link [LNU0] (IRQs *22) ACPI: PCI Interrupt Link [LNU2] (IRQs *23) ACPI: PCI Interrupt Link [LNKA] (IRQs *54) ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x73f has been reserved system 00:01: ioport range 0x800-0x8fe has been reserved system 00:01: ioport range 0x900-0x9fe has been reserved system 00:01: ioport range 0x9ff-0x9ff has been reserved system 00:01: ioport range 0xa00-0xafe has been reserved system 00:01: ioport range 0xaff-0xaff has been reserved system 00:01: ioport range 0xb00-0xbfe has been reserved system 00:01: ioport range 0xbff-0xbff has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0xca0-0xca1 has been reserved system 00:01: ioport range 0xca4-0xca5 has been reserved system 00:01: ioport range 0xcf9-0xcf9 could not be reserved system 00:01: ioport range 0x3f8-0x3ff has been reserved system 00:01: iomem range 0x80000000-0x8fffffff could not be reserved system 00:01: iomem range 0xf7df0000-0xf7df0fff has been reserved system 00:01: iomem range 0xfdef0000-0xfdef0fff has been reserved pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 pci 0000:00:09.0: IO window: 0x1000-0x2fff pci 0000:00:09.0: MEM window: 0xf7e00000-0xf7ffffff pci 0000:00:09.0: PREFETCH window: 0x000000e8000000-0x000000efffffff pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 pci 0000:02:00.0: IO window: disabled pci 0000:02:00.0: MEM window: 0xf8000000-0xf9ffffff pci 0000:02:00.0: PREFETCH window: 0x00000090000000-0x000000900fffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: 0xf8000000-0xf9ffffff pci 0000:00:0b.0: PREFETCH window: 0x00000090000000-0x000000900fffff pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 pci 0000:04:00.0: IO window: disabled pci 0000:04:00.0: MEM window: 0xfa000000-0xfbffffff pci 0000:04:00.0: PREFETCH window: 0x00000090100000-0x000000901fffff pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: 0xfa000000-0xfbffffff pci 0000:00:0c.0: PREFETCH window: 0x00000090100000-0x000000901fffff pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 pci 0000:06:00.0: IO window: disabled pci 0000:06:00.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:06:00.0: PREFETCH window: 0x00000090200000-0x000000902fffff pci 0000:00:0d.0: PCI bridge, secondary bus 0000:06 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:0d.0: PREFETCH window: 0x00000090200000-0x000000902fffff pci 0000:00:0e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:0e.0: IO window: 0x3000-0x3fff pci 0000:00:0e.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:0e.0: PREFETCH window: 0x00000090300000-0x000000903fffff pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:02:00.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:06:00.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:42:04.0: PCI bridge, secondary bus 0000:43 pci 0000:42:04.0: IO window: disabled pci 0000:42:04.0: MEM window: disabled pci 0000:42:04.0: PREFETCH window: disabled pci 0000:41:00.0: PCI bridge, secondary bus 0000:42 pci 0000:41:00.0: IO window: 0x4000-0x4fff pci 0000:41:00.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:41:00.0: PREFETCH window: 0x00000084000000-0x000000840fffff pci 0000:40:0c.0: PCI bridge, secondary bus 0000:41 pci 0000:40:0c.0: IO window: 0x4000-0x4fff pci 0000:40:0c.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:40:0c.0: PREFETCH window: 0x00000084000000-0x000000840fffff pci 0000:40:0d.0: PCI bridge, secondary bus 0000:44 pci 0000:40:0d.0: IO window: disabled pci 0000:40:0d.0: MEM window: disabled pci 0000:40:0d.0: PREFETCH window: disabled pci 0000:40:0e.0: PCI bridge, secondary bus 0000:47 pci 0000:40:0e.0: IO window: disabled pci 0000:40:0e.0: MEM window: disabled pci 0000:40:0e.0: PREFETCH window: disabled pci 0000:40:0c.0: setting latency timer to 64 pci 0000:41:00.0: setting latency timer to 64 pci 0000:40:0d.0: setting latency timer to 64 pci 0000:40:0e.0: setting latency timer to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 1322k freed IA-32 Microcode Update Driver: v1.14a microcode: CPU0 not a capable Intel processor microcode: CPU1 not a capable Intel processor microcode: CPU2 not a capable Intel processor microcode: CPU3 not a capable Intel processor audit: initializing netlink socket (disabled) type=2000 audit(1219143719.787:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 16013 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:01:03.0: Boot video device pci 0000:01:04.4: HCRESET not completed yet! pci 0000:40:00.0: Enabling HT MSI Mapping pci 0000:40:0c.0: Enabling HT MSI Mapping pci 0000:40:0c.0: Found enabled HT MSI Mapping pci 0000:40:0d.0: Enabling HT MSI Mapping pci 0000:40:0d.0: Found enabled HT MSI Mapping pci 0000:40:0e.0: Enabling HT MSI Mapping pci 0000:40:0e.0: Found enabled HT MSI Mapping pcieport-driver 0000:00:0b.0: setting latency timer to 64 pcieport-driver 0000:00:0b.0: found MSI capability pci_express 0000:00:0b.0:pcie00: allocate port service pci_express 0000:00:0b.0:pcie01: allocate port service pci_express 0000:00:0b.0:pcie03: allocate port service pcieport-driver 0000:00:0c.0: setting latency timer to 64 pcieport-driver 0000:00:0c.0: found MSI capability pci_express 0000:00:0c.0:pcie00: allocate port service pci_express 0000:00:0c.0:pcie01: allocate port service pci_express 0000:00:0c.0:pcie03: allocate port service pcieport-driver 0000:00:0d.0: setting latency timer to 64 pcieport-driver 0000:00:0d.0: found MSI capability pci_express 0000:00:0d.0:pcie00: allocate port service pci_express 0000:00:0d.0:pcie01: allocate port service pci_express 0000:00:0d.0:pcie03: allocate port service pcieport-driver 0000:00:0e.0: setting latency timer to 64 pcieport-driver 0000:00:0e.0: found MSI capability pci_express 0000:00:0e.0:pcie00: allocate port service pci_express 0000:00:0e.0:pcie01: allocate port service pci_express 0000:00:0e.0:pcie03: allocate port service pcieport-driver 0000:40:0c.0: setting latency timer to 64 pcieport-driver 0000:40:0c.0: found MSI capability pci_express 0000:40:0c.0:pcie00: allocate port service pci_express 0000:40:0c.0:pcie01: allocate port service pci_express 0000:40:0c.0:pcie03: allocate port service pcieport-driver 0000:40:0d.0: setting latency timer to 64 pcieport-driver 0000:40:0d.0: found MSI capability pci_express 0000:40:0d.0:pcie00: allocate port service pci_express 0000:40:0d.0:pcie01: allocate port service pci_express 0000:40:0d.0:pcie03: allocate port service pcieport-driver 0000:40:0e.0: setting latency timer to 64 pcieport-driver 0000:40:0e.0: found MSI capability pci_express 0000:40:0e.0:pcie00: allocate port service pci_express 0000:40:0e.0:pcie01: allocate port service pci_express 0000:40:0e.0:pcie03: allocate port service input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 processor ACPI0007:02: registered as cooling_device2 processor ACPI0007:03: registered as cooling_device3 hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 ipmi message handler version 39.2 ipmi device interface IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16 Clocksource tsc unstable (delta = 22526988344 ns) Using irq 16 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized IPMI Watchdog: driver initialized Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. IPMI poweroff: ATCA Detect mfg 0xB prod 0x0 IPMI poweroff: Unable to find a poweroff function that will work, giving up IPMI poweroff: ATCA Detect mfg 0xB prod 0x0 IPMI poweroff: Unable to find a poweroff function that will work, giving up Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18 pci 0000:01:03.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18 [drm] Initialized radeon 1.29.0 20080528 on minor 0 Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found brd: module loaded Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.9 (July 18, 2008) ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 bnx2 0000:03:00.0: PCI INT A -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6 bnx2 0000:05:00.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: local port 54871 netconsole: local IP 139.185.50.77 netconsole: interface eth0 netconsole: remote port 54871 netconsole: remote IP 139.185.50.76 netconsole: remote ethernet address 00:18:fe:34:1c:3d netconsole: device eth0 not up yet, forcing it bnx2: eth0: using MSI netconsole: carrier detect appears untrustworthy, waiting 4 seconds bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex console [netcon0] enabled netconsole: network logging started Loading iSCSI transport class v2.0-870. Driver 'sd' needs updating - please use bus_type methods PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input1 i2c /dev entries driver SoftDog: cannot register miscdev on minor=130 (err=-16) EDAC MC: Ver: 2.1.0 Aug 19 2008 cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 8218 processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. Freeing unused kernel memory: 396k freed Write protecting the kernel read-only data: 4628k USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 1 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: HCRESET not completed yet! uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected insmod used greatest stack depth: 4976 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 10 ports detected usb 1-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /class/input/input2 input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /class/input/input3 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 HP CISS Driver (v 3.6.20) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54 cciss 0000:42:08.0: PCI INT A -> Link[LNKA] -> GSI 54 (level, high) -> IRQ 54 cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 503 using DAC usb 1-2: new full speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 7 ports detected blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d0: p1 p2 p3 p4 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d1: p1 p2 insmod used greatest stack depth: 4136 bytes left EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. modprobe used greatest stack depth: 3576 bytes left Emulex LightPulse Fibre Channel SCSI driver 8.2.7 Copyright(c) 2004-2008 Emulex. All rights reserved. lpfc 0000:08:00.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18 lpfc 0000:08:00.0: setting latency timer to 64 scsi0 : on PCI bus 08 device 00 irq 18 lpfc 0000:08:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x4 x2 scsi 0:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:0:0: Attached scsi generic sg0 type 12 scsi 0:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:1:0: Attached scsi generic sg1 type 12 scsi 0:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 0:0:1:8: [sda] 2187605616 512-byte hardware sectors (1120054 MB) sd 0:0:1:8: [sda] Write Protect is off sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08 sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:8: [sda] 2187605616 512-byte hardware sectors (1120054 MB) sd 0:0:1:8: [sda] Write Protect is off sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08 sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:1:8: [sda] Attached SCSI disk sd 0:0:1:8: Attached scsi generic sg2 type 0 tg3.c:v3.93 (May 22, 2008) ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19 tg3 0000:07:04.0: PCI INT A -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19 lpfc 0000:08:00.1: PCI INT B -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19 lpfc 0000:08:00.1: setting latency timer to 64 scsi1 : on PCI bus 08 device 01 irq 19 eth2: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:2f eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth2: dma_rwctrl[76148000] dma_mask[40-bit] tg3 0000:07:04.1: PCI INT B -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 eth3: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:30 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth3: dma_rwctrl[76148000] dma_mask[40-bit] lpfc 0000:08:00.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x4 x2 scsi 1:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:0:0: Attached scsi generic sg3 type 12 scsi 1:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:1:0: Attached scsi generic sg4 type 12 scsi 1:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 1:0:1:8: [sdb] 2187605616 512-byte hardware sectors (1120054 MB) sd 1:0:1:8: [sdb] Write Protect is off sd 1:0:1:8: [sdb] Mode Sense: 83 00 00 08 sd 1:0:1:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:1:8: [sdb] 2187605616 512-byte hardware sectors (1120054 MB) sd 1:0:1:8: [sdb] Write Protect is off sd 1:0:1:8: [sdb] Mode Sense: 83 00 00 08 sd 1:0:1:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:1:8: [sdb] Attached SCSI disk sd 1:0:1:8: Attached scsi generic sg5 type 0 lp: driver loaded but no devices found EXT3 FS on cciss/c0d0p3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on cciss/c0d1p1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on cciss/c0d1p2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. Adding 8385920k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:8385920k rc.sysinit used greatest stack depth: 3560 bytes left warning: process `kudzu' used the deprecated sysctl system call with 1.23. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) rport-0:0-17: blocked FC remote port time out: removing rport rport-1:0-18: blocked FC remote port time out: removing rport kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. rport-0:0-5: blocked FC remote port time out: removing rport rport-1:0-5: blocked FC remote port time out: removing rport rport-1:0-16: blocked FC remote port time out: removing rport rport-0:0-13: blocked FC remote port time out: removing rport rport-1:0-6: blocked FC remote port time out: removing rport rport-0:0-10: blocked FC remote port time out: removing rport rport-1:0-17: blocked FC remote port time out: removing rport rport-0:0-4: blocked FC remote port time out: removing rport tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. modprobe used greatest stack depth: 3384 bytes left tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. ifconfig: page allocation failure. order:4, mode:0x40d0 Pid: 5738, comm: ifconfig Not tainted 2.6.27-rc3-git6 #1 Call Trace: [] __alloc_pages_internal+0x3a3/0x3be [] alloc_pages_current+0x96/0x9f [] __get_free_pages+0xe/0x4d [] __kmalloc+0x3a/0xaf [] zlib_inflate_blob+0x4e/0xc0 [] bnx2_reset_nic+0x320/0x1070 [] ? setup_irq+0x250/0x277 [] ? bnx2_msi+0x0/0x4a [] ? request_irq+0x9e/0xc7 [] bnx2_init_nic+0x1b/0x69 [] bnx2_open+0x7b/0x1a8 [] dev_open+0x73/0xa8 [] dev_change_flags+0xab/0x167 [] devinet_ioctl+0x269/0x5da [] ? unlock_page+0x2d/0x32 [] inet_ioctl+0x92/0xaa [] sock_ioctl+0x1d1/0x1fb [] vfs_ioctl+0x2a/0x77 [] do_vfs_ioctl+0x255/0x272 [] ? do_page_fault+0x473/0x7dd [] sys_ioctl+0x42/0x67 [] system_call_fastpath+0x16/0x1b Mem-Info: Node 0 DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 CPU 1: hi: 0, btch: 1 usd: 0 CPU 2: hi: 0, btch: 1 usd: 0 CPU 3: hi: 0, btch: 1 usd: 0 Node 0 DMA32 per-cpu: CPU 0: hi: 186, btch: 31 usd: 29 CPU 1: hi: 186, btch: 31 usd: 29 CPU 2: hi: 186, btch: 31 usd: 56 CPU 3: hi: 186, btch: 31 usd: 0 Node 0 Normal per-cpu: CPU 0: hi: 186, btch: 31 usd: 0 CPU 1: hi: 186, btch: 31 usd: 0 CPU 2: hi: 186, btch: 31 usd: 0 CPU 3: hi: 186, btch: 31 usd: 0 Node 1 Normal per-cpu: CPU 0: hi: 186, btch: 31 usd: 0 CPU 1: hi: 186, btch: 31 usd: 0 CPU 2: hi: 186, btch: 31 usd: 0 CPU 3: hi: 186, btch: 31 usd: 0 Active:689932 inactive:38624 dirty:14 writeback:929 unstable:0 free:8106 slab:26092 mapped:157421 pagetables:240384 bounce:0 Node 0 DMA free:9716kB min:12kB low:12kB high:16kB active:0kB inactive:0kB present:8740kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 1974 3994 3994 Node 0 DMA32 free:12784kB min:2816kB low:3520kB high:4224kB active:1097104kB inactive:135784kB present:2021920kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 2020 2020 Node 0 Normal free:3004kB min:2880kB low:3600kB high:4320kB active:50172kB inactive:5096kB present:2068480kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Node 1 Normal free:6920kB min:5764kB low:7204kB high:8644kB active:1612452kB inactive:13616kB present:4136956kB pages_scanned:1661 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Node 0 DMA: 7*4kB 3*8kB 6*16kB 3*32kB 4*64kB 2*128kB 1*256kB 1*512kB 2*1024kB 1*2048kB 1*4096kB = 9716kB Node 0 DMA32: 3128*4kB 0*8kB 0*16kB 1*32kB 1*64kB 1*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 12736kB Node 0 Normal: 641*4kB 24*8kB 2*16kB 0*32kB 1*64kB 0*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3108kB Node 1 Normal: 874*4kB 396*8kB 10*16kB 0*32kB 0*64kB 0*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 7080kB 277927 total pagecache pages 101812 pages in swap cache Swap cache stats: add 1225262, delete 1123450, find 325259/410133 Free swap = 6848900kB Total swap = 8385920kB 2097150 pages RAM 47300 pages reserved 9652616 pages shared 787860 pages non-shared ifconfig: page allocation failure. order:4, mode:0x40d0 Pid: 5738, comm: ifconfig Not tainted 2.6.27-rc3-git6 #1 Call Trace: [] __alloc_pages_internal+0x3a3/0x3be [] alloc_pages_current+0x96/0x9f [] __get_free_pages+0xe/0x4d [] __kmalloc+0x3a/0xaf [] zlib_inflate_blob+0x4e/0xc0 [] bnx2_reset_nic+0x320/0x1070 [] ? setup_irq+0x250/0x277 [] ? bnx2_msi+0x0/0x4a [] ? request_irq+0x9e/0xc7 [] bnx2_init_nic+0x1b/0x69 [] bnx2_open+0x7b/0x1a8 [] dev_open+0x73/0xa8 [] dev_change_flags+0xab/0x167 [] devinet_ioctl+0x269/0x5da [] inet_ioctl+0x92/0xaa [] sock_ioctl+0x1d1/0x1fb [] vfs_ioctl+0x2a/0x77 [] do_vfs_ioctl+0x255/0x272 [] ? __up_write+0xf0/0xff [] sys_ioctl+0x42/0x67 [] system_call_fastpath+0x16/0x1b Mem-Info: Node 0 DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 CPU 1: hi: 0, btch: 1 usd: 0 CPU 2: hi: 0, btch: 1 usd: 0 CPU 3: hi: 0, btch: 1 usd: 0 Node 0 DMA32 per-cpu: CPU 0: hi: 186, btch: 31 usd: 170 CPU 1: hi: 186, btch: 31 usd: 0 CPU 2: hi: 186, btch: 31 usd: 0 CPU 3: hi: 186, btch: 31 usd: 0 Node 0 Normal per-cpu: CPU 0: hi: 186, btch: 31 usd: 29 CPU 1: hi: 186, btch: 31 usd: 0 CPU 2: hi: 186, btch: 31 usd: 30 CPU 3: hi: 186, btch: 31 usd: 0 Node 1 Normal per-cpu: CPU 0: hi: 186, btch: 31 usd: 0 CPU 1: hi: 186, btch: 31 usd: 0 CPU 2: hi: 186, btch: 31 usd: 0 CPU 3: hi: 186, btch: 31 usd: 0 Active:685559 inactive:18333 dirty:1 writeback:212 unstable:0 free:27733 slab:26232 mapped:160535 pagetables:246266 bounce:0 Node 0 DMA free:9716kB min:12kB low:12kB high:16kB active:0kB inactive:0kB present:8740kB pages_scanned:0 all_unreclaimable? yes lowmem_reserve[]: 0 1974 3994 3994 Node 0 DMA32 free:82520kB min:2816kB low:3520kB high:4224kB active:1088724kB inactive:56480kB present:2021920kB pages_scanned:482 all_unreclaimable? no lowmem_reserve[]: 0 0 2020 2020 Node 0 Normal free:3756kB min:2880kB low:3600kB high:4320kB active:52592kB inactive:1512kB present:2068480kB pages_scanned:208 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Node 1 Normal free:14940kB min:5764kB low:7204kB high:8644kB active:1600920kB inactive:15340kB present:4136956kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Node 0 DMA: 7*4kB 3*8kB 6*16kB 3*32kB 4*64kB 2*128kB 1*256kB 1*512kB 2*1024kB 1*2048kB 1*4096kB = 9716kB Node 0 DMA32: 20450*4kB 115*8kB 6*16kB 0*32kB 1*64kB 1*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 83008kB Node 0 Normal: 823*4kB 1*8kB 1*16kB 0*32kB 1*64kB 0*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3636kB Node 1 Normal: 2939*4kB 383*8kB 3*16kB 0*32kB 1*64kB 1*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 15060kB 248051 total pagecache pages 85966 pages in swap cache Swap cache stats: add 1287048, delete 1201082, find 334433/430174 Free swap = 6842920kB Total swap = 8385920kB 2097150 pages RAM 47300 pages reserved 9999788 pages shared 757310 pages non-shared oracle used greatest stack depth: 3352 bytes left tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. rport-1:0-8: blocked FC remote port time out: removing rport rport-0:0-14: blocked FC remote port time out: removing rport rport-1:0-13: blocked FC remote port time out: removing rport rport-0:0-7: blocked FC remote port time out: removing rport tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. rport-1:0-24: blocked FC remote port time out: removing rport rport-0:0-24: blocked FC remote port time out: removing rport rport-1:0-23: blocked FC remote port time out: removing rport rport-0:0-23: blocked FC remote port time out: removing rport tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. rport-1:0-25: blocked FC remote port time out: removing rport rport-0:0-25: blocked FC remote port time out: removing rport rport-1:0-26: blocked FC remote port time out: removing rport rport-0:0-26: blocked FC remote port time out: removing rport tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. INFO: task kjournald:5682 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D 0000000100cd1aa9 5200 5682 2 ffff88017e5afce0 0000000000000046 0000000000000000 00000000019c85ca ffff88017e620de0 ffffffff8068e360 ffff88017e621120 0000000000000202 00000000000000ff ffffffff8024b7fa 0000000000000000 0000000000000000 Call Trace: [] ? getnstimeofday+0x3a/0x9a [] io_schedule+0x5d/0x9f [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x45/0x76 [] ? sync_buffer+0x0/0x3f [] ? sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6e/0x7b [] ? wake_bit_function+0x0/0x2a [] __wait_on_buffer+0x1f/0x21 [] journal_commit_transaction+0x8e6/0xd7e [] ? try_to_del_timer_sync+0x56/0x62 [] kjournald+0xc3/0x1fb [] ? autoremove_wake_function+0x0/0x38 [] ? kjournald+0x0/0x1fb [] kthread+0x49/0x76 [] child_rip+0xa/0x11 [] ? kthread+0x0/0x76 [] ? child_rip+0x0/0x11 INFO: task kjournald:5682 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D 0000000100cd1aa9 5200 5682 2 ffff88017e5afce0 0000000000000046 0000000000000000 00000000019c85ca ffff88017e620de0 ffffffff8068e360 ffff88017e621120 0000000000000202 00000000000000ff ffffffff8024b7fa 0000000000000000 0000000000000000 Call Trace: [] ? getnstimeofday+0x3a/0x9a [] io_schedule+0x5d/0x9f [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x45/0x76 [] ? sync_buffer+0x0/0x3f [] ? sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6e/0x7b [] ? wake_bit_function+0x0/0x2a [] __wait_on_buffer+0x1f/0x21 [] journal_commit_transaction+0x8e6/0xd7e [] ? try_to_del_timer_sync+0x56/0x62 [] kjournald+0xc3/0x1fb [] ? autoremove_wake_function+0x0/0x38 [] ? kjournald+0x0/0x1fb [] kthread+0x49/0x76 [] child_rip+0xa/0x11 [] ? kthread+0x0/0x76 [] ? child_rip+0x0/0x11 INFO: task kjournald:5682 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D 0000000100cd1aa9 5200 5682 2 ffff88017e5afce0 0000000000000046 0000000000000000 00000000019c85ca ffff88017e620de0 ffffffff8068e360 ffff88017e621120 0000000000000202 00000000000000ff ffffffff8024b7fa 0000000000000000 0000000000000000 Call Trace: [] ? getnstimeofday+0x3a/0x9a [] io_schedule+0x5d/0x9f [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x45/0x76 [] ? sync_buffer+0x0/0x3f [] ? sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6e/0x7b [] ? wake_bit_function+0x0/0x2a [] __wait_on_buffer+0x1f/0x21 [] journal_commit_transaction+0x8e6/0xd7e [] ? try_to_del_timer_sync+0x56/0x62 [] kjournald+0xc3/0x1fb [] ? autoremove_wake_function+0x0/0x38 [] ? kjournald+0x0/0x1fb [] kthread+0x49/0x76 [] child_rip+0xa/0x11 [] ? kthread+0x0/0x76 [] ? child_rip+0x0/0x11 INFO: task kjournald:5682 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D 0000000100cd1aa9 5200 5682 2 ffff88017e5afce0 0000000000000046 0000000000000000 00000000019c85ca ffff88017e620de0 ffffffff8068e360 ffff88017e621120 0000000000000202 00000000000000ff ffffffff8024b7fa 0000000000000000 0000000000000000 Call Trace: [] ? getnstimeofday+0x3a/0x9a [] io_schedule+0x5d/0x9f [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x45/0x76 [] ? sync_buffer+0x0/0x3f [] ? sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6e/0x7b [] ? wake_bit_function+0x0/0x2a [] __wait_on_buffer+0x1f/0x21 [] journal_commit_transaction+0x8e6/0xd7e [] ? try_to_del_timer_sync+0x56/0x62 [] kjournald+0xc3/0x1fb [] ? autoremove_wake_function+0x0/0x38 [] ? kjournald+0x0/0x1fb [] kthread+0x49/0x76 [] child_rip+0xa/0x11 [] ? kthread+0x0/0x76 [] ? child_rip+0x0/0x11 INFO: task kjournald:5682 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D 0000000100cd1aa9 5200 5682 2 ffff88017e5afce0 0000000000000046 0000000000000000 00000000019c85ca ffff88017e620de0 ffffffff8068e360 ffff88017e621120 0000000000000202 00000000000000ff ffffffff8024b7fa 0000000000000000 0000000000000000 Call Trace: [] ? getnstimeofday+0x3a/0x9a [] io_schedule+0x5d/0x9f [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x45/0x76 [] ? sync_buffer+0x0/0x3f [] ? sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6e/0x7b [] ? wake_bit_function+0x0/0x2a [] __wait_on_buffer+0x1f/0x21 [] journal_commit_transaction+0x8e6/0xd7e [] ? try_to_del_timer_sync+0x56/0x62 [] kjournald+0xc3/0x1fb [] ? autoremove_wake_function+0x0/0x38 [] ? kjournald+0x0/0x1fb [] kthread+0x49/0x76 [] child_rip+0xa/0x11 [] ? kthread+0x0/0x76 [] ? child_rip+0x0/0x11 INFO: task kjournald:5682 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D 0000000100cd1aa9 5200 5682 2 ffff88017e5afce0 0000000000000046 0000000000000000 00000000019c85ca ffff88017e620de0 ffffffff8068e360 ffff88017e621120 0000000000000202 00000000000000ff ffffffff8024b7fa 0000000000000000 0000000000000000 Call Trace: [] ? getnstimeofday+0x3a/0x9a [] io_schedule+0x5d/0x9f [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x45/0x76 [] ? sync_buffer+0x0/0x3f [] ? sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6e/0x7b [] ? wake_bit_function+0x0/0x2a [] __wait_on_buffer+0x1f/0x21 [] journal_commit_transaction+0x8e6/0xd7e [] ? try_to_del_timer_sync+0x56/0x62 [] kjournald+0xc3/0x1fb [] ? autoremove_wake_function+0x0/0x38 [] ? kjournald+0x0/0x1fb [] kthread+0x49/0x76 [] child_rip+0xa/0x11 [] ? kthread+0x0/0x76 [] ? child_rip+0x0/0x11 INFO: task kjournald:5682 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D 0000000100cd1aa9 5200 5682 2 ffff88017e5afce0 0000000000000046 0000000000000000 00000000019c85ca ffff88017e620de0 ffffffff8068e360 ffff88017e621120 0000000000000202 00000000000000ff ffffffff8024b7fa 0000000000000000 0000000000000000 Call Trace: [] ? getnstimeofday+0x3a/0x9a [] io_schedule+0x5d/0x9f [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x45/0x76 [] ? sync_buffer+0x0/0x3f [] ? sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6e/0x7b [] ? wake_bit_function+0x0/0x2a [] __wait_on_buffer+0x1f/0x21 [] journal_commit_transaction+0x8e6/0xd7e [] ? try_to_del_timer_sync+0x56/0x62 [] kjournald+0xc3/0x1fb [] ? autoremove_wake_function+0x0/0x38 [] ? kjournald+0x0/0x1fb [] kthread+0x49/0x76 [] child_rip+0xa/0x11 [] ? kthread+0x0/0x76 [] ? child_rip+0x0/0x11