Linux version 2.6.25-mm1 (root@ca-ostest293.us.oracle.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Apr 18 10:30:24 PDT 2008 Command line: root=LABEL=/ selinux=0 console=tty0 netconsole=52918@139.185.50.77/eth0,52918@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe50000 (usable) BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data) BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000027ffff000 (usable) debug: ignoring loglevel setting. Entering add_active_range(0, 1, 159) 0 entries of 256 used Entering add_active_range(0, 256, 523856) 1 entries of 256 used Entering add_active_range(0, 1048576, 2621439) 2 entries of 256 used max_pfn_mapped = 2621439 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping DMI 2.3 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT 7FE50780, 005C (r1 HP A08 2 Ò 162E) ACPI: FACP 7FE50800, 00F4 (r3 HP A08 2 Ò 162E) ACPI: DSDT 7FE50900, 3F75 (r1 HP DSDT 1 INTL 20030228) ACPI: FACS 7FE50100, 0040 ACPI: SPCR 7FE50140, 0050 (r1 HP SPCRRBSU 1 Ò 162E) ACPI: MCFG 7FE501C0, 003C (r1 HP ProLiant 1 0) ACPI: HPET 7FE50200, 0038 (r1 HP A08 2 Ò 162E) ACPI: SPMI 7FE50240, 0040 (r5 HP ProLiant 1 Ò 162E) ACPI: APIC 7FE50280, 00DE (r1 HP 00000083 2 0) ACPI: SRAT 7FE50380, 0110 (r1 AMD HAMMER 1 AMD 1) Entering add_active_range(0, 1, 159) 0 entries of 256 used Entering add_active_range(0, 256, 523856) 1 entries of 256 used Entering add_active_range(0, 1048576, 2621439) 2 entries of 256 used early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-81d7af] TEXT DATA BSS early res: 3 [7fd05000-7fe4f784] RAMDISK early res: 4 [9f400-fffff] BIOS reserved early res: 5 [8000-11fff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001600000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001800000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810001c00000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810001e00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002000000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810002200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810002400000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810002600000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810002800000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810002a00000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810002c00000 on node 0 [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810002e00000 on node 0 [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810003000000 on node 0 [ffffe20002000000-ffffe200021fffff] PMD ->ffff810003200000 on node 0 [ffffe20002200000-ffffe200023fffff] PMD ->ffff810003400000 on node 0 [ffffe20002400000-ffffe200025fffff] PMD ->ffff810003600000 on node 0 [ffffe20002600000-ffffe200027fffff] PMD ->ffff810003800000 on node 0 [ffffe20002800000-ffffe200029fffff] PMD ->ffff810003a00000 on node 0 [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810003c00000 on node 0 [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810003e00000 on node 0 [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810004000000 on node 0 [ffffe20003000000-ffffe200031fffff] PMD ->ffff810004200000 on node 0 [ffffe20003200000-ffffe200033fffff] PMD ->ffff810004400000 on node 0 [ffffe20003400000-ffffe200035fffff] PMD ->ffff810004600000 on node 0 [ffffe20003600000-ffffe200037fffff] PMD ->ffff810004800000 on node 0 [ffffe20003800000-ffffe200039fffff] PMD ->ffff810004a00000 on node 0 [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810004c00000 on node 0 [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810004e00000 on node 0 [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810005000000 on node 0 [ffffe20004000000-ffffe200041fffff] PMD ->ffff810005200000 on node 0 [ffffe20004200000-ffffe200043fffff] PMD ->ffff810005400000 on node 0 [ffffe20004400000-ffffe200045fffff] PMD ->ffff810005600000 on node 0 [ffffe20004600000-ffffe200047fffff] PMD ->ffff810005800000 on node 0 [ffffe20004800000-ffffe200049fffff] PMD ->ffff810005a00000 on node 0 [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810005c00000 on node 0 [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810005e00000 on node 0 [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810006000000 on node 0 [ffffe20005000000-ffffe200051fffff] PMD ->ffff810006200000 on node 0 [ffffe20005200000-ffffe200053fffff] PMD ->ffff810006400000 on node 0 [ffffe20005400000-ffffe200055fffff] PMD ->ffff810006600000 on node 0 [ffffe20005600000-ffffe200057fffff] PMD ->ffff810006800000 on node 0 [ffffe20005800000-ffffe200059fffff] PMD ->ffff810006a00000 on node 0 [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff810006c00000 on node 0 [ffffe20005c00000-ffffe20005dfffff] PMD ->ffff810006e00000 on node 0 [ffffe20005e00000-ffffe20005ffffff] PMD ->ffff810007000000 on node 0 [ffffe20006000000-ffffe200061fffff] PMD ->ffff810007200000 on node 0 [ffffe20006200000-ffffe200063fffff] PMD ->ffff810007400000 on node 0 [ffffe20006400000-ffffe200065fffff] PMD ->ffff810007600000 on node 0 [ffffe20006600000-ffffe200067fffff] PMD ->ffff810007800000 on node 0 [ffffe20006800000-ffffe200069fffff] PMD ->ffff810007a00000 on node 0 [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff810007c00000 on node 0 [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff810007e00000 on node 0 [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff810008000000 on node 0 [ffffe20007000000-ffffe200071fffff] PMD ->ffff810008200000 on node 0 [ffffe20007200000-ffffe200073fffff] PMD ->ffff810008400000 on node 0 [ffffe20007400000-ffffe200075fffff] PMD ->ffff810008600000 on node 0 [ffffe20007600000-ffffe200077fffff] PMD ->ffff810008800000 on node 0 [ffffe20007800000-ffffe200079fffff] PMD ->ffff810008a00000 on node 0 [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff810008c00000 on node 0 [ffffe20007c00000-ffffe20007dfffff] PMD ->ffff810008e00000 on node 0 [ffffe20007e00000-ffffe20007ffffff] PMD ->ffff810009000000 on node 0 [ffffe20008000000-ffffe200081fffff] PMD ->ffff810009200000 on node 0 [ffffe20008200000-ffffe200083fffff] PMD ->ffff810009400000 on node 0 [ffffe20008400000-ffffe200085fffff] PMD ->ffff810009600000 on node 0 [ffffe20008600000-ffffe200087fffff] PMD ->ffff810009800000 on node 0 [ffffe20008800000-ffffe200089fffff] PMD ->ffff810009a00000 on node 0 [ffffe20008a00000-ffffe20008bfffff] PMD ->ffff810009c00000 on node 0 sizeof(struct page) = 56 Zone PFN ranges: DMA 1 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2621439 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 1 -> 159 0: 256 -> 523856 0: 1048576 -> 2621439 On node 0 totalpages: 2096621 DMA zone: 55 pages used for memmap DMA zone: 1676 pages reserved DMA zone: 2267 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505480 pages, LIFO batch:31 Normal zone: 21503 pages used for memmap Normal zone: 1551360 pages, LIFO batch:31 Movable zone: 0 pages used for memmap Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xf7df0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38]) IOAPIC[1]: apic_id 9, version 0, address 0xfdef0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10228201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000 PM: Registered nosave memory: 000000007fe58000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 36464 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2059107 Kernel command line: root=LABEL=/ selinux=0 console=tty0 netconsole=52918@139.185.50.77/eth0,52918@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1004.629 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... Node 0: aperture @ c000000 size 64 MB Aperture pointing to e820 RAM. Ignoring. No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ c000000 PM: Registered nosave memory: 000000000c000000 - 0000000010000000 Memory: 8156584k/10485756k available (3307k kernel code, 229328k reserved, 1706k data, 260k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 2015.21 BogoMIPS (lpj=4030438) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ACPI: Core revision 20080321 CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12557898 Detected 12.557 MHz APIC timer. Booting processor 1/2 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2009.34 BogoMIPS (lpj=4018685) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 2/1 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 2009.42 BogoMIPS (lpj=4018840) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 3/3 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 2009.34 BogoMIPS (lpj=4018685) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Brought up 4 CPUs Total of 4 processors activated (8043.32 BogoMIPS). khelper used greatest stack depth: 6136 bytes left net_namespace: 368 bytes NET: Registered protocol family 16 ACPI: bus type pci registered Overlap at 0x7fe50000-0x7fe55000 PCI: BIOS Bug: MCFG area at 80000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 Overlap at 0x7fe50000-0x7fe51000 ACPI: EC: Look up EC in DSDT Overlap at 0x7fe50000-0x7fe51000 Overlap at 0x7fe50000-0x7fe51000 Overlap at 0x7fe50000-0x7fe51000 Overlap at 0x7fe50000-0x7fe51000 Overlap at 0x7fe50000-0x7fe51000 Overlap at 0x7fe50000-0x7fe51000 ACPI: SSDT 7FE58000, 04F0 (r2 HP PNOWSSDT 2 HP 1) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT] ACPI: PCI Interrupt Link [LNKW] (IRQs *16) ACPI: PCI Interrupt Link [LNKX] (IRQs *17) ACPI: PCI Interrupt Link [LNKY] (IRQs *18) ACPI: PCI Interrupt Link [LNKZ] (IRQs *19) ACPI: PCI Interrupt Link [LNU0] (IRQs *22) ACPI: PCI Interrupt Link [LNU2] (IRQs *23) ACPI: PCI Interrupt Link [LNKA] (IRQs *54) ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ c000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x73f has been reserved system 00:01: ioport range 0x800-0x8fe has been reserved system 00:01: ioport range 0x900-0x9fe has been reserved system 00:01: ioport range 0x9ff-0x9ff has been reserved system 00:01: ioport range 0xa00-0xafe has been reserved system 00:01: ioport range 0xaff-0xaff has been reserved system 00:01: ioport range 0xb00-0xbfe has been reserved system 00:01: ioport range 0xbff-0xbff has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0xca0-0xca1 has been reserved system 00:01: ioport range 0xca4-0xca5 has been reserved system 00:01: ioport range 0xcf9-0xcf9 could not be reserved system 00:01: ioport range 0x3f8-0x3ff has been reserved system 00:01: iomem range 0x80000000-0x8fffffff has been reserved system 00:01: iomem range 0xf7df0000-0xf7df0fff has been reserved system 00:01: iomem range 0xfdef0000-0xfdef0fff has been reserved PCI: Bridge: 0000:00:09.0 IO window: 1000-2fff MEM window: 0xf7e00000-0xf7ffffff PREFETCH window: 0x00000000e8000000-0x00000000efffffff PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: 0xf8000000-0xf9ffffff PREFETCH window: 0x0000000090000000-0x00000000900fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: 0xf8000000-0xf9ffffff PREFETCH window: 0x0000000090000000-0x00000000900fffff PCI: Bridge: 0000:04:00.0 IO window: disabled. MEM window: 0xfa000000-0xfbffffff PREFETCH window: 0x0000000090100000-0x00000000901fffff PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: 0xfa000000-0xfbffffff PREFETCH window: 0x0000000090100000-0x00000000901fffff PCI: Bridge: 0000:06:00.0 IO window: disabled. MEM window: 0xfdc00000-0xfdcfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: 0xfdc00000-0xfdcfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: 3000-3fff MEM window: 0xfdd00000-0xfddfffff PREFETCH window: 0x0000000090200000-0x00000000902fffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:04:00.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:06:00.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:42:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:41:00.0 IO window: 4000-4fff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x0000000090300000-0x00000000903fffff PCI: Bridge: 0000:40:0c.0 IO window: 4000-4fff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x0000000090300000-0x00000000903fffff PCI: Bridge: 0000:40:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:40:0c.0 to 64 PCI: Setting latency timer of device 0000:41:00.0 to 64 PCI: Setting latency timer of device 0000:40:0d.0 to 64 PCI: Setting latency timer of device 0000:40:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1321k freed microcode: CPU0 not a capable Intel processor microcode: CPU1 not a capable Intel processor microcode: CPU2 not a capable Intel processor microcode: CPU3 not a capable Intel processor IA-32 Microcode Update Driver: v1.14a audit: initializing netlink socket (disabled) type=2000 audit(1208514714.783:1): initialized Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 15934 for ipc namespace ffffffff80693c00 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler bfq registered pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:01:03.0: Boot video device pci 0000:01:04.4: HCRESET not completed yet! pci 0000:40:00.0: Enabling HT MSI Mapping pci 0000:40:0c.0: Enabling HT MSI Mapping pci 0000:40:0c.0: Found enabled HT MSI Mapping pci 0000:40:0d.0: Enabling HT MSI Mapping pci 0000:40:0d.0: Found enabled HT MSI Mapping pci 0000:40:0e.0: Enabling HT MSI Mapping pci 0000:40:0e.0: Found enabled HT MSI Mapping PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] PCI: Setting latency timer of device 0000:40:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0c.0:pcie00] PCI: Setting latency timer of device 0000:40:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0d.0:pcie00] PCI: Setting latency timer of device 0000:40:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0e.0:pcie00] input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: ACPI0007:03 is registered as cooling_device3 hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKY] -> GSI 18 (level, high) -> IRQ 18 [drm] Initialized radeon 1.28.0 20060524 on minor 0 ipmi message handler version 39.2 ipmi device interface IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:04.6[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16 Clocksource tsc unstable (delta = 12139784458 ns) Using irq 16 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized IPMI Watchdog: driver initialized Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. IPMI poweroff: ATCA Detect mfg 0xB prod 0x0 IPMI poweroff: Unable to find a poweroff function that will work, giving up IPMI poweroff: ATCA Detect mfg 0xB prod 0x0 IPMI poweroff: Unable to find a poweroff function that will work, giving up Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found brd: module loaded Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.4 (February 18, 2008) ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17 eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6 ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16 eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: local port 52918 netconsole: local IP 139.185.50.77 netconsole: interface eth0 netconsole: remote port 52918 netconsole: remote IP 139.185.50.76 netconsole: remote ethernet address 00:18:fe:34:1c:3d netconsole: device eth0 not up yet, forcing it bnx2: eth0: using MSI bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex netconsole: carrier detect appears untrustworthy, waiting 4 seconds console [netcon0] enabled netconsole: network logging started Loading iSCSI transport class v2.0-869. Driver 'sd' needs updating - please use bus_type methods PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input1 i2c /dev entries driver SoftDog: cannot register miscdev on minor=130 (err=-16) EDAC MC: Ver: 2.1.0 Apr 18 2008 cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8218 processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. Freeing unused kernel memory: 260k freed Write protecting the kernel read-only data: 4544k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:01:04.4[B] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 1 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: HCRESET not completed yet! uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected sysfs: duplicate filename '189:0' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:427 sysfs_add_one+0x42/0xac() Modules linked in: uhci_hcd(+) Pid: 626, comm: insmod Not tainted 2.6.25-mm1 #1 Call Trace: [] warn_on_slowpath+0x58/0x82 [] ? printk+0x67/0x69 [] ? ifind+0x3d/0x78 [] ? sysfs_ilookup_test+0x0/0x14 [] ? ilookup5_nowait+0x3b/0x44 [] sysfs_add_one+0x42/0xac [] sysfs_create_link+0xc3/0xf8 [] device_add+0x15d/0x5cd [] ? kobject_init_internal+0x1a/0x36 [] ? kobject_init+0x42/0x6a [] device_register+0x19/0x1d [] device_create+0xdd/0x10e [] ? sysfs_create_link+0xce/0xf8 [] ? usb_create_ep_files+0x28d/0x2f0 [] usb_classdev_notify+0x55/0x87 [] notifier_call_chain+0x33/0x5b [] __blocking_notifier_call_chain+0x4d/0x6a [] blocking_notifier_call_chain+0xf/0x11 [] usb_notify_add_device+0x18/0x1a [] generic_probe+0x96/0xa0 [] usb_probe_device+0x36/0x38 [] driver_probe_device+0xdb/0x162 [] ? __device_attach+0x0/0xb [] __device_attach+0x9/0xb [] bus_for_each_drv+0x4a/0x7d [] device_attach+0x63/0x79 [] bus_attach_device+0x28/0x59 [] device_add+0x423/0x5cd [] ? usb_cache_string+0x7a/0x8b [] usb_new_device+0x51/0x90 [] usb_add_hcd+0x477/0x5cc [] usb_hcd_pci_probe+0x1e4/0x294 [] pci_device_probe+0x4f/0x77 [] driver_probe_device+0xdb/0x162 [] __driver_attach+0x4f/0x79 [] ? __driver_attach+0x0/0x79 [] bus_for_each_dev+0x4a/0x7b [] driver_attach+0x1c/0x1e [] bus_add_driver+0xb5/0x207 [] driver_register+0x5e/0xd5 [] __pci_register_driver+0x63/0x9d [] :uhci_hcd:uhci_hcd_init+0x81/0xb2 [] sys_init_module+0x17d9/0x194d [] ? kmem_cache_destroy+0x0/0x13c [] ? __fput+0x15e/0x16a [] system_call_after_swapgs+0x7b/0x80 ---[ end trace 11da844a0430ff27 ]--- disabling CONFIG_USB_DEVICE_CLASS might fix this insmod used greatest stack depth: 3856 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNU0] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected sysfs: duplicate filename '189:128' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:427 sysfs_add_one+0x42/0xac() Modules linked in: ohci_hcd(+) uhci_hcd Pid: 631, comm: insmod Tainted: G W 2.6.25-mm1 #1 Call Trace: [] warn_on_slowpath+0x58/0x82 [] ? printk+0x67/0x69 [] ? ifind+0x3d/0x78 [] ? sysfs_ilookup_test+0x0/0x14 [] ? ilookup5_nowait+0x3b/0x44 [] sysfs_add_one+0x42/0xac [] sysfs_create_link+0xc3/0xf8 [] device_add+0x15d/0x5cd [] ? kobject_init_internal+0x1a/0x36 [] ? kobject_init+0x42/0x6a [] device_register+0x19/0x1d [] device_create+0xdd/0x10e [] ? sysfs_create_link+0xce/0xf8 [] ? usb_create_ep_files+0x28d/0x2f0 [] usb_classdev_notify+0x55/0x87 [] notifier_call_chain+0x33/0x5b [] __blocking_notifier_call_chain+0x4d/0x6a [] blocking_notifier_call_chain+0xf/0x11 [] usb_notify_add_device+0x18/0x1a [] generic_probe+0x96/0xa0 [] usb_probe_device+0x36/0x38 [] driver_probe_device+0xdb/0x162 [] ? __device_attach+0x0/0xb [] __device_attach+0x9/0xb [] bus_for_each_drv+0x4a/0x7d [] device_attach+0x63/0x79 [] bus_attach_device+0x28/0x59 [] device_add+0x423/0x5cd [] ? usb_cache_string+0x7a/0x8b [] usb_new_device+0x51/0x90 [] usb_add_hcd+0x477/0x5cc [] usb_hcd_pci_probe+0x1e4/0x294 [] pci_device_probe+0x4f/0x77 [] driver_probe_device+0xdb/0x162 [] __driver_attach+0x4f/0x79 [] ? __driver_attach+0x0/0x79 [] bus_for_each_dev+0x4a/0x7b [] driver_attach+0x1c/0x1e [] bus_add_driver+0xb5/0x207 [] driver_register+0x5e/0xd5 [] __pci_register_driver+0x63/0x9d [] :ohci_hcd:ohci_hcd_mod_init+0x3f/0x45 [] sys_init_module+0x17d9/0x194d [] ? usb_root_hub_lost_power+0x0/0x3b [] ? __fput+0x15e/0x16a [] system_call_after_swapgs+0x7b/0x80 ---[ end trace 11da844a0430ff27 ]--- disabling CONFIG_USB_DEVICE_CLASS might fix this ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNU2] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000 usb 1-1: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 10 ports detected sysfs: duplicate filename '189:256' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:427 sysfs_add_one+0x42/0xac() Modules linked in: ehci_hcd(+) ohci_hcd uhci_hcd Pid: 636, comm: insmod Tainted: G W 2.6.25-mm1 #1 Call Trace: [] warn_on_slowpath+0x58/0x82 [] ? printk+0x67/0x69 [] ? ifind+0x3d/0x78 [] ? sysfs_ilookup_test+0x0/0x14 [] ? ilookup5_nowait+0x3b/0x44 [] sysfs_add_one+0x42/0xac [] sysfs_create_link+0xc3/0xf8 [] device_add+0x15d/0x5cd [] ? kobject_init_internal+0x1a/0x36 [] ? kobject_init+0x42/0x6a [] device_register+0x19/0x1d [] device_create+0xdd/0x10e [] ? sysfs_create_link+0xce/0xf8 [] ? usb_create_ep_files+0x28d/0x2f0 [] usb_classdev_notify+0x55/0x87 [] notifier_call_chain+0x33/0x5b [] __blocking_notifier_call_chain+0x4d/0x6a [] blocking_notifier_call_chain+0xf/0x11 [] usb_notify_add_device+0x18/0x1a [] generic_probe+0x96/0xa0 [] usb_probe_device+0x36/0x38 [] driver_probe_device+0xdb/0x162 [] ? __device_attach+0x0/0xb [] __device_attach+0x9/0xb [] bus_for_each_drv+0x4a/0x7d [] device_attach+0x63/0x79 [] bus_attach_device+0x28/0x59 [] device_add+0x423/0x5cd [] ? usb_cache_string+0x7a/0x8b [] usb_new_device+0x51/0x90 [] usb_add_hcd+0x477/0x5cc [] usb_hcd_pci_probe+0x1e4/0x294 [] pci_device_probe+0x4f/0x77 [] driver_probe_device+0xdb/0x162 [] __driver_attach+0x4f/0x79 [] ? __driver_attach+0x0/0x79 [] bus_for_each_dev+0x4a/0x7b [] driver_attach+0x1c/0x1e [] bus_add_driver+0xb5/0x207 [] driver_register+0x5e/0xd5 [] __pci_register_driver+0x63/0x9d [] :ehci_hcd:ehci_hcd_init+0x1e/0x20 [] sys_init_module+0x17d9/0x194d [] ? usb_root_hub_lost_power+0x0/0x3b [] ? __fput+0x15e/0x16a [] system_call_after_swapgs+0x7b/0x80 ---[ end trace 11da844a0430ff27 ]--- disabling CONFIG_USB_DEVICE_CLASS might fix this HP CISS Driver (v 3.6.14) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54 ACPI: PCI Interrupt 0000:42:08.0[A] -> Link [LNKA] -> GSI 54 (level, high) -> IRQ 54 Overlap at 0xfdf80000-0xfdf81000 usb 1-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /class/input/input2 cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 503 using DAC input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /class/input/input3 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 sysfs: duplicate filename '189:1' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:427 sysfs_add_one+0x42/0xac() Modules linked in: cciss(+) ehci_hcd ohci_hcd uhci_hcd Pid: 224, comm: khubd Tainted: G W 2.6.25-mm1 #1 Call Trace: [] warn_on_slowpath+0x58/0x82 [] ? printk+0x67/0x69 [] ? strcmp+0x15/0x1f [] sysfs_add_one+0x42/0xac [] sysfs_create_link+0xc3/0xf8 [] device_add+0x15d/0x5cd [] ? kobject_init_internal+0x1a/0x36 [] ? kobject_init+0x42/0x6a [] device_register+0x19/0x1d [] device_create+0xdd/0x10e [] ? sysfs_create_link+0xce/0xf8 [] usb_classdev_notify+0x55/0x87 [] notifier_call_chain+0x33/0x5b [] __blocking_notifier_call_chain+0x4d/0x6a [] blocking_notifier_call_chain+0xf/0x11 [] usb_notify_add_device+0x18/0x1a [] generic_probe+0x96/0xa0 [] usb_probe_device+0x36/0x38 [] driver_probe_device+0xdb/0x162 [] ? __device_attach+0x0/0xb [] __device_attach+0x9/0xb [] bus_for_each_drv+0x4a/0x7d [] device_attach+0x63/0x79 [] bus_attach_device+0x28/0x59 [] device_add+0x423/0x5cd [] ? usb_cache_string+0x7a/0x8b [] usb_new_device+0x51/0x90 [] hub_thread+0x7ed/0xccf [] ? __switch_to+0x11e/0x2f8 [] ? autoremove_wake_function+0x0/0x38 [] ? hub_thread+0x0/0xccf [] kthread+0x49/0x78 [] child_rip+0xa/0x12 [] ? kthread+0x0/0x78 [] ? child_rip+0x0/0x12 ---[ end trace 11da844a0430ff27 ]--- disabling CONFIG_USB_DEVICE_CLASS might fix this usb 1-2: new full speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 7 ports detected sysfs: duplicate filename '189:2' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:427 sysfs_add_one+0x42/0xac() Modules linked in: cciss(+) ehci_hcd ohci_hcd uhci_hcd Pid: 224, comm: khubd Tainted: G W 2.6.25-mm1 #1 Call Trace: [] warn_on_slowpath+0x58/0x82 [] ? printk+0x67/0x69 [] ? ifind+0x3d/0x78 [] ? sysfs_ilookup_test+0x0/0x14 [] ? ilookup5_nowait+0x3b/0x44 [] sysfs_add_one+0x42/0xac [] sysfs_create_link+0xc3/0xf8 [] device_add+0x15d/0x5cd [] ? kobject_init_internal+0x1a/0x36 [] ? kobject_init+0x42/0x6a [] device_register+0x19/0x1d [] device_create+0xdd/0x10e [] ? sysfs_create_link+0xce/0xf8 [] ? usb_create_ep_files+0x28d/0x2f0 [] usb_classdev_notify+0x55/0x87 [] notifier_call_chain+0x33/0x5b [] __blocking_notifier_call_chain+0x4d/0x6a [] blocking_notifier_call_chain+0xf/0x11 [] usb_notify_add_device+0x18/0x1a [] generic_probe+0x96/0xa0 [] usb_probe_device+0x36/0x38 [] driver_probe_device+0xdb/0x162 [] ? __device_attach+0x0/0xb [] __device_attach+0x9/0xb [] bus_for_each_drv+0x4a/0x7d [] device_attach+0x63/0x79 [] bus_attach_device+0x28/0x59 [] device_add+0x423/0x5cd [] ? usb_cache_string+0x7a/0x8b [] usb_new_device+0x51/0x90 [] hub_thread+0x7ed/0xccf [] ? __switch_to+0x11e/0x2f8 [] ? autoremove_wake_function+0x0/0x38 [] ? hub_thread+0x0/0xccf [] kthread+0x49/0x78 [] child_rip+0xa/0x12 [] ? kthread+0x0/0x78 [] ? child_rip+0x0/0x12 ---[ end trace 11da844a0430ff27 ]--- disabling CONFIG_USB_DEVICE_CLASS might fix this blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d0: p1 p2 p3 p4 < p5 p6 > blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d1: unknown partition table insmod used greatest stack depth: 3824 bytes left EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. modprobe used greatest stack depth: 3536 bytes left tg3.c:v3.90 (April 12, 2008) ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19 ACPI: PCI Interrupt 0000:07:04.0[A] -> Link [LNKZ] -> GSI 19 (level, high) -> IRQ 19 eth2: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:2f eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth2: dma_rwctrl[76148000] dma_mask[40-bit] ACPI: PCI Interrupt 0000:07:04.1[B] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16 eth3: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:30 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth3: dma_rwctrl[76148000] dma_mask[40-bit] lp: driver loaded but no devices found EXT3 FS on cciss/c0d0p3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 8385920k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:8385920k rc.sysinit used greatest stack depth: 3520 bytes left warning: process `kudzu' used the deprecated sysctl system call with 1.23. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. 6-1.test[13500]: segfault at 2713 ip 338ac04c36 sp 7fff75fb39b0 error 4 in librt-2.5.so[338ac00000+7000] 12-1.test[13619]: segfault at 2713 ip 338ac04c84 sp 7fff5d039a30 error 4 in librt-2.5.so[338ac00000+7000] tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. 5-1.test[13469]: segfault at 601000 ip 338b00acd2 sp 7fffc1e96898 error 6 in libpthread-2.5.so[338b000000+15000] 6-2.test[14971]: segfault at 2b0e5d6a3000 ip 400b1c sp 7fff4d407d30 error 4 in 6-2.test[400000+1000] 6-1.test[15000]: segfault at 2ab9f866e000 ip 400a87 sp 7fffb243ad70 error 6 in 6-1.test[400000+1000] 6-3.test[15121]: segfault at 2b16285e0000 ip 400ace sp 7fff824c8e00 error 6 in 6-3.test[400000+1000] 5-1.test[15780]: segfault at 186a3 ip 338ac04b59 sp 7fffb385f270 error 4 in librt-2.5.so[338ac00000+7000] 2-2.test[18090]: segfault at 3a00000000 ip 3a00000000 sp 7fff7cb30570 error 14 in ld-2.5.so[3a93400000+1a000] 2-3.test[18924]: segfault at 3a00000000 ip 3a00000000 sp 7fff936680a0 error 14 in ld-2.5.so[3a93400000+1a000] 3-2.test[20340]: segfault at 404fcfe8 ip 3a938961e0 sp 404fd008 error 6 in libc-2.5.so[3a93800000+144000] 3-2.test[20342]: segfault at 4121dfe8 ip 3a938961e0 sp 4121e008 error 6 in libc-2.5.so[3a93800000+144000] 3-2.test[20344]: segfault at 415c3fe8 ip 3a938961e0 sp 415c4008 error 6 in libc-2.5.so[3a93800000+144000] 3-2.test[20346]: segfault at 4120efe8 ip 3a938961e0 sp 4120f008 error 6 in libc-2.5.so[3a93800000+144000] 3-2.test[20348]: segfault at 40028fe8 ip 3a938961e0 sp 40029008 error 6 in libc-2.5.so[3a93800000+144000] 1-5.test[20458]: segfault at 41f1bfe8 ip 3a938961e0 sp 41f1c008 error 6 in libc-2.5.so[3a93800000+144000] 1-5.test[20463]: segfault at 40d24fe8 ip 3a938961e0 sp 40d25008 error 6 in libc-2.5.so[3a93800000+144000] 6-1.test[20803]: segfault at 2713 ip 338ac04be6 sp 7fff4d4adec0 error 4 in librt-2.5.so[338ac00000+7000] tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. warning: process `scrashme' used the deprecated sysctl system call with tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. JFS: nTxBlock = 8192, nTxLock = 65536 fsx-linux used greatest stack depth: 3456 bytes left SGI XFS with security attributes, large block/inode numbers, no debug enabled Filesystem "cciss/c0d1": Disabling barriers, not supported by the underlying device XFS mounting filesystem cciss/c0d1 Ending clean XFS mount for filesystem: cciss/c0d1 fsx-linux used greatest stack depth: 2720 bytes left SGI XFS with security attributes, large block/inode numbers, no debug enabled Filesystem "cciss/c0d1": Disabling barriers, not supported by the underlying device XFS mounting filesystem cciss/c0d1 Ending clean XFS mount for filesystem: cciss/c0d1 Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! fsx-linux used greatest stack depth: 2624 bytes left SGI XFS with security attributes, large block/inode numbers, no debug enabled Filesystem "cciss/c0d1": Disabling barriers, not supported by the underlying device XFS mounting filesystem cciss/c0d1 Ending clean XFS mount for filesystem: cciss/c0d1 Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! fsx-linux used greatest stack depth: 2528 bytes left ReiserFS: cciss/c0d1: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d1: using ordered data mode ReiserFS: cciss/c0d1: journal params: device cciss/c0d1, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 ReiserFS: cciss/c0d1: checking transaction log (cciss/c0d1) ReiserFS: cciss/c0d1: Using r5 hash to sort names ReiserFS: cciss/c0d1: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d1: using journaled data mode ReiserFS: cciss/c0d1: journal params: device cciss/c0d1, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 ReiserFS: cciss/c0d1: checking transaction log (cciss/c0d1) ReiserFS: cciss/c0d1: Using r5 hash to sort names ReiserFS: cciss/c0d1: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d1: using writeback data mode ReiserFS: cciss/c0d1: journal params: device cciss/c0d1, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 ReiserFS: cciss/c0d1: checking transaction log (cciss/c0d1) ReiserFS: cciss/c0d1: Using r5 hash to sort names ReiserFS: cciss/c0d1: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d1: using ordered data mode ReiserFS: cciss/c0d1: journal params: device cciss/c0d1, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 ReiserFS: cciss/c0d1: checking transaction log (cciss/c0d1) ReiserFS: cciss/c0d1: Using r5 hash to sort names ReiserFS: cciss/c0d1: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d1: using journaled data mode ReiserFS: cciss/c0d1: journal params: device cciss/c0d1, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 ReiserFS: cciss/c0d1: checking transaction log (cciss/c0d1) ReiserFS: cciss/c0d1: Using r5 hash to sort names Hangcheck: hangcheck value past margin! ReiserFS: cciss/c0d1: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d1: using writeback data mode ReiserFS: cciss/c0d1: journal params: device cciss/c0d1, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 ReiserFS: cciss/c0d1: checking transaction log (cciss/c0d1) ReiserFS: cciss/c0d1: Using r5 hash to sort names tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. ReiserFS: cciss/c0d1: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d1: using ordered data mode ReiserFS: cciss/c0d1: journal params: device cciss/c0d1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: cciss/c0d1: checking transaction log (cciss/c0d1) ReiserFS: cciss/c0d1: Using r5 hash to sort names ReiserFS: cciss/c0d1: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d1: using journaled data mode ReiserFS: cciss/c0d1: journal params: device cciss/c0d1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: cciss/c0d1: checking transaction log (cciss/c0d1) ReiserFS: cciss/c0d1: Using r5 hash to sort names ReiserFS: cciss/c0d1: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d1: using writeback data mode ReiserFS: cciss/c0d1: journal params: device cciss/c0d1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: cciss/c0d1: checking transaction log (cciss/c0d1) ReiserFS: cciss/c0d1: Using r5 hash to sort names Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Hangcheck: hangcheck value past margin! kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d1, internal journal EXT3-fs: mounted filesystem with writeback data mode. Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d1, internal journal EXT3-fs: mounted filesystem with writeback data mode. Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Hangcheck: hangcheck value past margin! kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d1, internal journal EXT3-fs: mounted filesystem with writeback data mode. Hangcheck: hangcheck value past margin! OCFS2 Node Manager 1.5.0 sysfs: duplicate filename 'o2cb' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:427 sysfs_add_one+0x42/0xac() Modules linked in: ocfs2_nodemanager(+) ocfs2_stackglue parport_pc lp parport tg3 cciss ehci_hcd ohci_hcd uhci_hcd [last unloaded: reiserfs] Pid: 29960, comm: modprobe Tainted: G W 2.6.25-mm1 #1 Call Trace: [] warn_on_slowpath+0x58/0x82 [] ? printk+0x67/0x69 [] ? ifind+0x4d/0x78 [] ? sysfs_ilookup_test+0x0/0x14 [] sysfs_add_one+0x42/0xac [] sysfs_create_link+0xc3/0xf8 [] :ocfs2_nodemanager:o2cb_sys_init+0x3c/0x83 [] :ocfs2_nodemanager:init_o2nm+0x9d/0xcc [] sys_init_module+0x17d9/0x194d [] ? simple_strtoull+0x0/0xa3 [] tracesys+0xd5/0xda ---[ end trace 11da844a0430ff27 ]--- ocfs2: Unknown symbol mlog_and_bits ocfs2: Unknown symbol mlog_not_bits OCFS2 Node Manager 1.5.0 sysfs: duplicate filename 'o2cb' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:427 sysfs_add_one+0x42/0xac() Modules linked in: ocfs2_nodemanager(+) ocfs2_stackglue parport_pc lp parport tg3 cciss ehci_hcd ohci_hcd uhci_hcd [last unloaded: reiserfs] Pid: 29979, comm: modprobe Tainted: G W 2.6.25-mm1 #1 Call Trace: [] warn_on_slowpath+0x58/0x82 [] ? printk+0x67/0x69 [] ? ifind+0x4d/0x78 [] ? sysfs_ilookup_test+0x0/0x14 [] sysfs_add_one+0x42/0xac [] sysfs_create_link+0xc3/0xf8 [] :ocfs2_nodemanager:o2cb_sys_init+0x3c/0x83 [] :ocfs2_nodemanager:init_o2nm+0x9d/0xcc [] sys_init_module+0x17d9/0x194d [] ? simple_strtoull+0x0/0xa3 [] tracesys+0xd5/0xda ---[ end trace 11da844a0430ff27 ]--- ocfs2: Unknown symbol mlog_and_bits ocfs2: Unknown symbol mlog_not_bits OCFS2 Node Manager 1.5.0 sysfs: duplicate filename 'o2cb' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:427 sysfs_add_one+0x42/0xac() Modules linked in: ocfs2_nodemanager(+) ocfs2_stackglue parport_pc lp parport tg3 cciss ehci_hcd ohci_hcd uhci_hcd [last unloaded: reiserfs] Pid: 30002, comm: modprobe Tainted: G W 2.6.25-mm1 #1 Call Trace: [] warn_on_slowpath+0x58/0x82 [] ? printk+0x67/0x69 [] ? ifind+0x4d/0x78 [] ? sysfs_ilookup_test+0x0/0x14 [] sysfs_add_one+0x42/0xac [] sysfs_create_link+0xc3/0xf8 [] :ocfs2_nodemanager:o2cb_sys_init+0x3c/0x83 [] :ocfs2_nodemanager:init_o2nm+0x9d/0xcc [] sys_init_module+0x17d9/0x194d [] ? simple_strtoull+0x0/0xa3 [] tracesys+0xd5/0xda ---[ end trace 11da844a0430ff27 ]--- ocfs2: Unknown symbol mlog_and_bits ocfs2: Unknown symbol mlog_not_bits Hangcheck: hangcheck value past margin! OCFS2 Node Manager 1.5.0 sysfs: duplicate filename 'o2cb' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:427 sysfs_add_one+0x42/0xac() Modules linked in: ocfs2_nodemanager(+) ocfs2_stackglue parport_pc lp parport tg3 cciss ehci_hcd ohci_hcd uhci_hcd [last unloaded: reiserfs] Pid: 30016, comm: modprobe Tainted: G W 2.6.25-mm1 #1 Call Trace: [] warn_on_slowpath+0x58/0x82 [] ? printk+0x67/0x69 [] ? ifind+0x4d/0x78 [] ? sysfs_ilookup_test+0x0/0x14 [] sysfs_add_one+0x42/0xac [] sysfs_create_link+0xc3/0xf8 [] :ocfs2_nodemanager:o2cb_sys_init+0x3c/0x83 [] :ocfs2_nodemanager:init_o2nm+0x9d/0xcc [] sys_init_module+0x17d9/0x194d [] ? simple_strtoull+0x0/0xa3 [] tracesys+0xd5/0xda ---[ end trace 11da844a0430ff27 ]--- ocfs2: Unknown symbol mlog_and_bits ocfs2: Unknown symbol mlog_not_bits OCFS2 Node Manager 1.5.0 sysfs: duplicate filename 'o2cb' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:427 sysfs_add_one+0x42/0xac() Modules linked in: ocfs2_nodemanager(+) ocfs2_stackglue parport_pc lp parport tg3 cciss ehci_hcd ohci_hcd uhci_hcd [last unloaded: reiserfs] Pid: 30042, comm: modprobe Tainted: G W 2.6.25-mm1 #1 Call Trace: [] warn_on_slowpath+0x58/0x82 [] ? printk+0x67/0x69 [] ? ifind+0x4d/0x78 [] ? sysfs_ilookup_test+0x0/0x14 [] sysfs_add_one+0x42/0xac [] sysfs_create_link+0xc3/0xf8 [] :ocfs2_nodemanager:o2cb_sys_init+0x3c/0x83 [] :ocfs2_nodemanager:init_o2nm+0x9d/0xcc [] sys_init_module+0x17d9/0x194d [] ? simple_strtoull+0x0/0xa3 [] tracesys+0xd5/0xda ---[ end trace 11da844a0430ff27 ]--- ocfs2: Unknown symbol mlog_and_bits ocfs2: Unknown symbol mlog_not_bits OCFS2 Node Manager 1.5.0 sysfs: duplicate filename 'o2cb' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:427 sysfs_add_one+0x42/0xac() Modules linked in: ocfs2_nodemanager(+) ocfs2_stackglue parport_pc lp parport tg3 cciss ehci_hcd ohci_hcd uhci_hcd [last unloaded: reiserfs] Pid: 30056, comm: modprobe Tainted: G W 2.6.25-mm1 #1 Call Trace: [] warn_on_slowpath+0x58/0x82 [] ? printk+0x67/0x69 [] ? ifind+0x4d/0x78 [] ? sysfs_ilookup_test+0x0/0x14 [] sysfs_add_one+0x42/0xac [] sysfs_create_link+0xc3/0xf8 [] :ocfs2_nodemanager:o2cb_sys_init+0x3c/0x83 [] :ocfs2_nodemanager:init_o2nm+0x9d/0xcc [] sys_init_module+0x17d9/0x194d [] ? simple_strtoull+0x0/0xa3 [] tracesys+0xd5/0xda ---[ end trace 11da844a0430ff27 ]--- ocfs2: Unknown symbol mlog_and_bits ocfs2: Unknown symbol mlog_not_bits BUG: unable to handle kernel paging request at ffffffffa00aad71 IP: [] strnlen+0x15/0x1f PGD 203067 PUD 207063 PMD 27e911067 PTE 0 Oops: 0000 [1] SMP last sysfs file: /sys/devices/pci0000:40/0000:40:0c.0/0000:41:00.0/0000:42:08.0/class CPU 3 Modules linked in: ocfs2_stackglue parport_pc lp parport tg3 cciss ehci_hcd ohci_hcd uhci_hcd [last unloaded: reiserfs] Pid: 30305, comm: cat Tainted: G W 2.6.25-mm1 #1 RIP: 0010:[] [] strnlen+0x15/0x1f RSP: 0018:ffff8102711efcc8 EFLAGS: 00010297 RAX: ffffffffa00aad71 RBX: ffff8102711efd38 RCX: ffffffff8060c9f5 RDX: ffff8102711efd68 RSI: fffffffffffffffe RDI: ffffffffa00aad71 RBP: ffff8102711efcc8 R08: 00000000ffffffff R09: 00000000000000c8 R10: 0000000000000050 R11: 0000000000000246 R12: ffff8101ff9010cc R13: ffffffffa00aad71 R14: 0000000000000011 R15: 0000000000000010 FS: 00007f32500376f0(0000) GS:ffff81027f806980(0000) knlGS:00000000f7fea6c0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffa00aad71 CR3: 000000027a5bb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cat (pid: 30305, threadinfo ffff8102711ee000, task ffff81027bb15100) Stack: ffff8102711efd28 ffffffff8035ac9e ffff8101ff901000 0000000000000f34 ffff8101ff9010cc ffff8101ff902000 ffffffff8060c9f5 ffff8101bb679880 ffff8101bb679880 0000000000000050 0000000000000004 0000000000000000 Call Trace: [] vsnprintf+0x31b/0x592 [] seq_printf+0x7e/0xa7 [] ? mark_page_accessed+0x44/0x52 [] ? debug_mutex_free_waiter+0x46/0x4a [] ? __mutex_lock_common+0x24d/0x25e [] ? count_partial+0x60/0x70 [] s_show+0x8a/0xd7 [] seq_read+0x10b/0x29a [] proc_reg_read+0x78/0x92 [] vfs_read+0xa8/0x102 [] sys_read+0x47/0x6d [] tracesys+0xd5/0xda Code: 48 8d 44 11 ff 40 38 30 74 0a 48 ff c8 48 39 d0 73 f3 31 c0 c9 c3 55 48 89 f8 48 89 e5 eb 03 48 ff c0 48 ff ce 48 83 fe ff 74 05 <80> 38 00 75 ef c9 48 29 f8 c3 55 31 c0 48 89 e5 eb 13 41 38 c8 RIP [] strnlen+0x15/0x1f RSP CR2: ffffffffa00aad71 Kernel panic - not syncing: Fatal exception Pid: 30305, comm: cat Tainted: G D W 2.6.25-mm1 #1 Call Trace: [] panic+0xa0/0x160 [] ? default_wake_function+0xd/0xf [] ? __wake_up+0x43/0x50 [] ? wake_up_klogd+0x32/0x34 [] oops_end+0x6a/0x77 [] do_page_fault+0x73b/0x7ea [] ? _d_rehash+0x1f/0x22 [] error_exit+0x0/0x51 [] ? strnlen+0x15/0x1f [] ? mntput_no_expire+0x22/0x118 [] ? vsnprintf+0x31b/0x592 [] ? seq_printf+0x7e/0xa7 [] ? mark_page_accessed+0x44/0x52 [] ? debug_mutex_free_waiter+0x46/0x4a [] ? __mutex_lock_common+0x24d/0x25e [] ? count_partial+0x60/0x70 [] ? s_show+0x8a/0xd7 [] ? seq_read+0x10b/0x29a [] ? proc_reg_read+0x78/0x92 [] ? vfs_read+0xa8/0x102 [] ? sys_read+0x47/0x6d [] ? tracesys+0xd5/0xda