========== hostname -s: ========== caor-test8 ========== domainname: ========== ========== uname -a: ========== Linux caor-test8 2.6.23 #1 SMP Thu Oct 11 14:14:33 PDT 2007 x86_64 x86_64 x86_64 GNU/Linux ========== df -Th: ========== Filesystem Type Size Used Avail Use% Mounted on /dev/sda5 ext3 54G 15G 37G 28% / udev tmpfs 2.0G 176K 2.0G 1% /dev /dev/sda1 ext3 99M 64M 30M 68% /boot /dev/sda3 ext3 9.9G 7.4G 2.1G 79% /home caor-control:/cruc/packages nfs 126G 20G 100G 17% /cruc/packages caor-control:/cruc/plans nfs 126G 20G 100G 17% /cruc/plans caor-control:/cruc/runs nfs 126G 20G 100G 17% /cruc/runs caor-control:/cruc/suts nfs 126G 20G 100G 17% /cruc/suts caor-control:/cruc/usr nfs 126G 20G 100G 17% /cruc/usr caor-control:/cruc/etc nfs 126G 20G 100G 17% /cruc/etc ========== mount: ========== /dev/sda5 on / type ext3 (rw,noacl) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/sda1 on /boot type ext3 (rw,noacl) /dev/sda3 on /home type ext3 (rw,noacl) caor-control:/cruc/packages on /cruc/packages type nfs (rw,soft,fg,intr,addr=138.2.140.159) caor-control:/cruc/plans on /cruc/plans type nfs (rw,soft,fg,intr,addr=138.2.140.159) caor-control:/cruc/runs on /cruc/runs type nfs (rw,soft,fg,intr,addr=138.2.140.159) caor-control:/cruc/suts on /cruc/suts type nfs (rw,soft,fg,intr,addr=138.2.140.159) caor-control:/cruc/usr on /cruc/usr type nfs (rw,soft,fg,intr,addr=138.2.140.159) caor-control:/cruc/etc on /cruc/etc type nfs (rw,soft,fg,intr,addr=138.2.140.159) ========== lsmod: ========== Module Size Used by loop 16772 0 ========== lshw: ========== /cruc/usr/bin/sut_sysinfo: line 11: lshw: command not found ========== lspci -vvv: ========== 00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 08) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [64] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 256 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 2 Link: Latency L0s <4us, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Advanced Error Reporting 00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 08) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR+ TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [64] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 4 Link: Latency L0s <4us, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Slot: AtnBtn+ PwrCtrl+ MRL+ AtnInd+ PwrInd+ HotPlug+ Surpise- Slot: Number 4, PowerLimit 25.000000 Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+ Slot: AttnInd Off, PwrInd Off, Power+ Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Advanced Error Reporting 00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 08) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR+ TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [64] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 6 Link: Latency L0s <4us, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Slot: AtnBtn+ PwrCtrl+ MRL+ AtnInd+ PwrInd+ HotPlug+ Surpise- Slot: Number 6, PowerLimit 25.000000 Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+ Slot: AttnInd Off, PwrInd Off, Power+ Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Advanced Error Reporting 00:08.0 System peripheral: Intel Corporation E7525/E7520/E7320 Extended Configuration Registers (rev 08) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 256 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [78] #0c [0008] Capabilities: [d8] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 Capabilities: [100] Advanced Error Reporting Capabilities: [300] Power Budgeting 02:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A (rev 08) (prog-if 20 [IO(X)-APIC]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 256 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [78] #0c [0008] Capabilities: [d8] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=02:00.2 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 Capabilities: [100] Advanced Error Reporting Capabilities: [300] Power Budgeting 02:00.3 PIC: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B (rev 08) (prog-if 20 [IO(X)-APIC]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- /dev/null || /cruc/usr/bin/sut_dispatcher >/cruc/suts/caor-test8/sut.log root 3281 0.1 0.0 9528 1244 ? S 14:18 0:10 /bin/bash -l /cruc/usr/bin/sut_dispatcher root 5838 0.0 0.0 7976 1448 ? S 16:58 0:00 /bin/bash /cruc/runs/2109/RUNNING/caor-test8/020-save_sysinfo root 5842 0.0 0.0 8008 1396 ? S 16:58 0:00 /bin/bash /cruc/usr/bin/sut_sysinfo root 5853 0.0 0.0 3296 796 ? R 16:58 0:00 ps auxw root 21522 0.0 0.0 0 0 ? S 16:45 0:00 [pdflush] root 21558 0.0 0.0 0 0 ? S 16:45 0:00 [pdflush] ========== chkconfig -l: ========== Makefile 0:off 1:off 2:off 3:off 4:off 5:off 6:off SuSEfirewall2_init 0:off 1:off 2:off 3:off 4:off 5:off 6:off SuSEfirewall2_setup 0:off 1:off 2:off 3:off 4:off 5:off 6:off acpid 0:off 1:off 2:on 3:on 4:off 5:on 6:off alsasound 0:off 1:off 2:on 3:on 4:off 5:on 6:off atd 0:off 1:off 2:off 3:off 4:off 5:off 6:off autofs 0:off 1:off 2:off 3:off 4:off 5:off 6:off autoyast 0:off 1:off 2:off 3:off 4:off 5:off 6:off cron 0:off 1:off 2:on 3:on 4:off 5:on 6:off crucible 0:off 1:off 2:off 3:off 4:off 5:off 6:off dbus 0:off 1:off 2:off 3:on 4:off 5:on 6:off drbd 0:off 1:off 2:off 3:off 4:off 5:off 6:off earlykbd 0:off 1:off 2:off 3:off 4:off 5:on 6:off earlykdm 0:off 1:off 2:off 3:off 4:off 5:on 6:off earlysyslog 0:off 1:off 2:off 3:off 4:off 5:on 6:off esound 0:off 1:off 2:off 3:off 4:off 5:off 6:off evms 0:off 1:off 2:off 3:off 4:off 5:off 6:off fam 0:off 1:off 2:off 3:off 4:off 5:off 6:off fbset 0:off 1:on 2:on 3:on 4:off 5:on 6:off gpm 0:off 1:off 2:off 3:off 4:off 5:off 6:off gssd 0:off 1:off 2:off 3:off 4:off 5:off 6:off haldaemon 0:off 1:off 2:off 3:on 4:off 5:on 6:off heartbeat 0:off 1:off 2:off 3:off 4:off 5:off 6:off idmapd 0:off 1:off 2:off 3:off 4:off 5:off 6:off ipmi 0:off 1:off 2:off 3:off 4:off 5:off 6:off ipvsadm 0:off 1:off 2:off 3:off 4:off 5:off 6:off irq_balancer 0:off 1:on 2:on 3:on 4:off 5:on 6:off joystick 0:off 1:off 2:off 3:off 4:off 5:off 6:off kbd 0:off 1:on 2:on 3:on 4:off 5:on 6:off S:on ksysguardd 0:off 1:off 2:off 3:off 4:off 5:off 6:off ldirectord 0:off 1:off 2:off 3:off 4:off 5:off 6:off lm_sensors 0:off 1:off 2:off 3:off 4:off 5:off 6:off mdadmd 0:off 1:off 2:off 3:off 4:off 5:off 6:off microcode 0:off 1:on 2:on 3:on 4:off 5:on 6:off S:on microcode_ctl 0:off 1:off 2:off 3:on 4:off 5:on 6:off multipathd 0:off 1:off 2:off 3:off 4:off 5:off 6:off network 0:off 1:off 2:on 3:on 4:off 5:on 6:off nfs 0:off 1:off 2:off 3:on 4:off 5:on 6:off nfsboot 0:off 1:off 2:off 3:on 4:off 5:on 6:off nfsserver 0:off 1:off 2:off 3:off 4:off 5:off 6:off novell-zmd 0:off 1:off 2:off 3:on 4:on 5:on 6:off nscd 0:off 1:off 2:off 3:on 4:off 5:on 6:off ntp 0:off 1:off 2:off 3:off 4:off 5:off 6:off o2cb 0:off 1:off 2:on 3:on 4:off 5:on 6:off ocfs2 0:off 1:off 2:on 3:on 4:off 5:on 6:off openct 0:off 1:off 2:off 3:off 4:off 5:off 6:off oraoltschedule 0:off 1:off 2:off 3:off 4:off 5:off 6:off pcscd 0:off 1:off 2:off 3:off 4:off 5:off 6:off portmap 0:off 1:off 2:off 3:on 4:off 5:on 6:off postfix 0:off 1:off 2:off 3:on 4:off 5:on 6:off powerd 0:off 1:off 2:off 3:off 4:off 5:off 6:off powersaved 0:off 1:off 2:on 3:on 4:off 5:on 6:off random 0:off 1:off 2:on 3:on 4:off 5:on 6:off raw 0:off 1:off 2:off 3:off 4:off 5:off 6:off resmgr 0:off 1:off 2:on 3:on 4:off 5:on 6:off rpasswdd 0:off 1:off 2:off 3:off 4:off 5:off 6:off rpmconfigcheck 0:off 1:off 2:off 3:off 4:off 5:off 6:off rsyncd 0:off 1:off 2:off 3:off 4:off 5:off 6:off saslauthd 0:off 1:off 2:off 3:off 4:off 5:off 6:off skeleton.compat 0:off 1:off 2:off 3:off 4:off 5:off 6:off slpd 0:off 1:off 2:off 3:on 4:off 5:on 6:off smartd 0:off 1:off 2:off 3:off 4:off 5:off 6:off smpppd 0:off 1:off 2:off 3:off 4:off 5:off 6:off snmpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off splash 0:off 1:on 2:on 3:on 4:off 5:on 6:off S:on splash_early 0:off 1:off 2:on 3:on 4:off 5:on 6:off sshd 0:off 1:off 2:off 3:on 4:off 5:on 6:off svcgssd 0:off 1:off 2:off 3:off 4:off 5:off 6:off syslog 0:off 1:off 2:on 3:on 4:off 5:on 6:off xdm 0:off 1:off 2:off 3:off 4:off 5:on 6:off xfs 0:off 1:off 2:off 3:off 4:off 5:off 6:off xinetd 0:off 1:off 2:off 3:on 4:off 5:on 6:off ypbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off xinetd based services: chargen: off chargen-udp: off cvs: off daytime: off daytime-udp: off echo: off echo-udp: off fam: off netstat: off rsync: off servers: off services: off systat: off time: off time-udp: off vnc: on ========== ifconfig: ========== eth0 Link encap:Ethernet HWaddr 00:04:23:A7:C8:8B inet addr:138.2.140.128 Bcast:138.2.140.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:133156 errors:0 dropped:0 overruns:0 frame:0 TX packets:109163 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:65326298 (62.3 Mb) TX bytes:76241778 (72.7 Mb) Base address:0xd480 Memory:fe6c0000-fe6e0000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:44 errors:0 dropped:0 overruns:0 frame:0 TX packets:44 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3224 (3.1 Kb) TX bytes:3224 (3.1 Kb) ========== showmount: ========== mount clntudp_create: RPC: Program not registered ========== rpcinfo -p: ========== program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100021 1 tcp 59327 nlockmgr 100021 3 tcp 59327 nlockmgr 100021 4 tcp 59327 nlockmgr ========== exportfs -v: ========== ========== netstat: ========== Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 caor-test8.us.ora:30491 caor-test8.us.or:sunrpc TIME_WAIT tcp 0 0 localhost:945 localhost:sunrpc TIME_WAIT tcp 0 0 caor-tes:ideafarm-catch caor-control.us.ora:nfs ESTABLISHED Active UNIX domain sockets (w/o servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ] DGRAM 3769 @/var/run/hal/hotplug_socket2 unix 6 [ ] DGRAM 4442 /dev/log unix 2 [ ] DGRAM 295 @/org/kernel/udev/udevd unix 2 [ ] DGRAM 3768 @/org/freedesktop/hal/udev_event unix 2 [ ] DGRAM 6100 unix 2 [ ] DGRAM 5141 unix 3 [ ] STREAM CONNECTED 5140 /var/run/acpid.socket unix 3 [ ] STREAM CONNECTED 5139 unix 3 [ ] STREAM CONNECTED 5138 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 5137 unix 3 [ ] STREAM CONNECTED 5136 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 5135 unix 2 [ ] DGRAM 5104 unix 2 [ ] DGRAM 4764 unix 3 [ ] STREAM CONNECTED 4620 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 4619 unix 3 [ ] STREAM CONNECTED 4606 @/tmp/hald-local/dbus-Mr4UyPWKqm unix 3 [ ] STREAM CONNECTED 4596 unix 3 [ ] STREAM CONNECTED 4065 /var/run/acpid.socket unix 3 [ ] STREAM CONNECTED 4064 unix 3 [ ] STREAM CONNECTED 4110 @/tmp/hald-local/dbus-Mr4UyPWKqm unix 3 [ ] STREAM CONNECTED 4063 unix 3 [ ] STREAM CONNECTED 3750 unix 3 [ ] STREAM CONNECTED 3749 ========== nfsstat: ========== Server rpc stats: calls badcalls badauth badclnt xdrcall 0 0 0 0 0 Server nfs v2: null getattr setattr root lookup readlink 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% read wrcache write create remove rename 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% link symlink mkdir rmdir readdir fsstat 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% Client rpc stats: calls retrans authrefrsh 36143 0 0 Client nfs v2: null getattr setattr root lookup readlink 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% read wrcache write create remove rename 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% link symlink mkdir rmdir readdir fsstat 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% Client nfs v3: null getattr setattr lookup access readlink 0 0% 10635 29% 15 0% 7586 20% 1396 3% 0 0% read write create mkdir symlink mknod 1446 4% 5800 16% 970 2% 10 0% 0 0% 0 0% remove rmdir rename link readdir readdirplus 901 2% 1 0% 2716 7% 0 0% 0 0% 108 0% fsstat fsinfo pathconf commit 66 0% 12 0% 0 0% 4480 12% ========== dmesg -s 1000000: ========== [ 0.000000] Linux version 2.6.23 (root@caor-test8) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Thu Oct 11 14:14:33 PDT 2007 [ 0.000000] Command line: auto BOOT_IMAGE=2.6.23 ro root=805 console=ttyS0,115200n81 console=tty0 netconsole=6508@138.2.140.128/eth0,6608@138.2.140.159/00:18:8B:01:D2:2B debug ignore_loglevel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ebaf0 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable) [ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffdf000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dffdf000 - 00000000e0000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 917456) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 256 used [ 0.000000] end_pfn_map = 1179648 [ 0.000000] DMI not present or invalid. [ 0.000000] ACPI: RSDP 000F6BE0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT DFFD0000, 0038 (r1 A M I OEMRSDT 10000418 MSFT 97) [ 0.000000] ACPI: FACP DFFD0200, 0084 (r2 A M I OEMFACP 10000418 MSFT 97) [ 0.000000] ACPI: DSDT DFFD0460, 54BA (r1 CYCRB CYCRB045 45 INTL 2002026) [ 0.000000] ACPI: FACS DFFDF000, 0040 [ 0.000000] ACPI: APIC DFFD0390, 0084 (r1 A M I OEMAPIC 10000418 MSFT 97) [ 0.000000] ACPI: MCFG DFFD0420, 003C (r1 Intel Cayuse 1 MSFT 1) [ 0.000000] ACPI: OEMB DFFDF040, 0040 (r1 A M I AMI_OEM 10000418 MSFT 97) [ 0.000000] ACPI: HPET DFFD7460, 0038 (r1 A M I OEMHPET 10000418 MSFT 97) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 917456) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1179648 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 917456 [ 0.000000] 0: 1048576 -> 1179648 [ 0.000000] On node 0 totalpages: 1048431 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1592 pages reserved [ 0.000000] DMA zone: 2343 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 897040 pages, LIFO batch:31 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 129024 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] Processor #6 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) [ 0.000000] Processor #7 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 10, address 0xfec80400, GSI 48-71 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at f1000000 (gap: f0000000:fc00000) [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 33256 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order. Total pages: 1028407 [ 0.000000] Kernel command line: auto BOOT_IMAGE=2.6.23 ro root=805 console=ttyS0,115200n81 console=tty0 netconsole=6508@138.2.140.128/eth0,6608@138.2.140.159/00:18:8B:01:D2:2B debug ignore_loglevel [ 0.000000] netconsole: local port 6508 [ 0.000000] netconsole: local IP 138.2.140.128 [ 0.000000] netconsole: interface eth0 [ 0.000000] netconsole: remote port 6608 [ 0.000000] netconsole: remote IP 138.2.140.159 [ 0.000000] netconsole: remote ethernet address 00:18:8b:01:d2:2b [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 41.710967] time.c: Detected 3400.113 MHz processor. [ 41.715345] Console: colour VGA+ 80x25 [ 41.715349] console [tty0] enabled [ 41.730326] console [ttyS0] enabled [ 42.248303] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 42.259889] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 42.268387] Checking aperture... [ 42.271815] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 42.326862] Placing software IO TLB between 0x5e6c000 - 0x9e6c000 [ 42.379332] Memory: 4040820k/4718592k available (3466k kernel code, 152632k reserved, 1862k data, 232k init) [ 42.469145] Calibrating delay using timer specific routine.. 6804.95 BogoMIPS (lpj=13609908) [ 42.477992] Mount-cache hash table entries: 256 [ 42.482879] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 42.488325] CPU: L2 cache: 1024K [ 42.491726] using mwait in idle threads. [ 42.495823] CPU: Physical Processor ID: 0 [ 42.500005] CPU: Processor Core ID: 0 [ 42.503852] CPU0: Thermal monitoring enabled (TM1) [ 42.508826] SMP alternatives: switching to UP code [ 42.514747] ACPI: Core revision 20070126 [ 42.563319] Using local APIC timer interrupts. [ 42.597329] result 12500362 [ 42.600287] Detected 12.500 MHz APIC timer. [ 42.605235] SMP alternatives: switching to SMP code [ 42.611029] Booting processor 1/4 APIC 0x6 [ 42.625552] Initializing CPU#1 [ 42.705012] Calibrating delay using timer specific routine.. 6800.34 BogoMIPS (lpj=13600696) [ 42.705023] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 42.705025] CPU: L2 cache: 1024K [ 42.705028] CPU: Physical Processor ID: 3 [ 42.705029] CPU: Processor Core ID: 0 [ 42.705040] CPU1: Thermal monitoring enabled (TM1) [ 42.705239] Intel(R) Xeon(TM) CPU 3.40GHz stepping 04 [ 42.705270] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 42.773099] SMP alternatives: switching to SMP code [ 42.778767] Booting processor 2/4 APIC 0x1 [ 42.793326] Initializing CPU#2 [ 42.872921] Calibrating delay using timer specific routine.. 6800.57 BogoMIPS (lpj=13601147) [ 42.872934] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 42.872937] CPU: L2 cache: 1024K [ 42.872940] CPU: Physical Processor ID: 0 [ 42.872942] CPU: Processor Core ID: 0 [ 42.872955] CPU2: Thermal monitoring enabled (TM1) [ 42.873157] Intel(R) Xeon(TM) CPU 3.40GHz stepping 04 [ 42.873205] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 42.941023] SMP alternatives: switching to SMP code [ 42.946930] Booting processor 3/4 APIC 0x7 [ 42.961456] Initializing CPU#3 [ 43.040829] Calibrating delay using timer specific routine.. 6800.51 BogoMIPS (lpj=13601030) [ 43.040840] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 43.040842] CPU: L2 cache: 1024K [ 43.040845] CPU: Physical Processor ID: 3 [ 43.040846] CPU: Processor Core ID: 0 [ 43.040857] CPU3: Thermal monitoring enabled (TM1) [ 43.041056] Intel(R) Xeon(TM) CPU 3.40GHz stepping 04 [ 43.041074] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 43.108811] Brought up 4 CPUs [ 43.112267] khelper used greatest stack depth: 6512 bytes left [ 43.118291] khelper used greatest stack depth: 6328 bytes left [ 43.124348] NET: Registered protocol family 16 [ 43.129186] No dock devices found. [ 43.133292] ACPI: bus type pci registered [ 43.137483] PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support. [ 43.152595] PCI: Using MMCONFIG at e0000000 - efffffff [ 43.159636] khelper used greatest stack depth: 6256 bytes left [ 43.167934] ACPI: EC: Look up EC in DSDT [ 43.176715] ACPI: Interpreter enabled [ 43.180550] ACPI: (supports S0 S1 S3 S5) [ 43.184878] ACPI: Using IOAPIC for interrupt routing [ 43.201396] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 43.206785] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 43.213393] PCI quirk: region 0500-053f claimed by ICH4 GPIO [ 43.219351] PCI: PXH quirk detected, disabling MSI for SHPC device [ 43.225740] PCI: PXH quirk detected, disabling MSI for SHPC device [ 43.232648] PCI: Transparent bridge - 0000:00:1e.0 [ 43.237641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 43.243898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 43.250555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 43.257158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2P3._PRT] [ 43.264282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2P4._PRT] [ 43.271346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 43.277981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 43.288435] ACPI: PCI Interrupt Link [LNKA] (IRQs *7) [ 43.293936] ACPI: PCI Interrupt Link [LNKB] (IRQs *7) [ 43.299433] ACPI: PCI Interrupt Link [LNKC] (IRQs *7) [ 43.304934] ACPI: PCI Interrupt Link [LNKD] (IRQs *7) [ 43.310434] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 43.319767] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 43.329099] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 43.338423] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 43.346444] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 75, should be 6A [20070126] [ 43.356513] Linux Plug and Play Support v0.97 (c) Adam Belay [ 43.362386] pnp: PnP ACPI init [ 43.365616] ACPI: bus type pnp registered [ 43.374586] pnp: PnP ACPI: found 15 devices [ 43.378943] ACPI: ACPI bus type pnp unregistered [ 43.384128] SCSI subsystem initialized [ 43.388290] usbcore: registered new interface driver usbfs [ 43.394036] usbcore: registered new interface driver hub [ 43.399575] usbcore: registered new device driver usb [ 43.405014] PCI: Using ACPI for IRQ routing [ 43.409369] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 43.432619] PCI-GART: No AMD northbridge found. [ 43.437320] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 43.442577] hpet0: 3 64-bit timers, 14318180 Hz [ 43.448608] Time: tsc clocksource has been installed. [ 43.456650] pnp: 00:0b: ioport range 0x600-0x61f has been reserved [ 43.462993] pnp: 00:0b: ioport range 0x580-0x59f has been reserved [ 43.469344] pnp: 00:0b: ioport range 0x640-0x65f has been reserved [ 43.475680] pnp: 00:0b: ioport range 0x680-0x6cf has been reserved [ 43.482034] pnp: 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved [ 43.489158] pnp: 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved [ 43.496760] pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved [ 43.504361] pnp: 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved [ 43.511492] pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved [ 43.519096] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 43.525704] pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved [ 43.532303] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 43.539259] pnp: 00:0e: iomem range 0x100000-0xdfffffff could not be reserved [ 43.547044] PCI: Bridge: 0000:02:00.0 [ 43.550881] IO window: c000-dfff [ 43.554456] MEM window: fe300000-fe6fffff [ 43.558805] PREFETCH window: ff900000-ff9fffff [ 43.563593] PCI: Bridge: 0000:02:00.2 [ 43.567421] IO window: disabled. [ 43.570989] MEM window: disabled. [ 43.574643] PREFETCH window: disabled. [ 43.578731] PCI: Bridge: 0000:00:02.0 [ 43.582560] IO window: c000-dfff [ 43.586128] MEM window: fe300000-fe8fffff [ 43.590475] PREFETCH window: ff900000-ffafffff [ 43.595263] PCI: Bridge: 0000:00:04.0 [ 43.599092] IO window: disabled. [ 43.602660] MEM window: fe900000-fe9fffff [ 43.607016] PREFETCH window: disabled. [ 43.611103] PCI: Bridge: 0000:00:06.0 [ 43.614932] IO window: disabled. [ 43.618500] MEM window: fea00000-feafffff [ 43.622846] PREFETCH window: disabled. [ 43.626936] PCI: Bridge: 0000:00:1e.0 [ 43.630773] IO window: b000-bfff [ 43.634340] MEM window: fc200000-fe2fffff [ 43.638688] PREFETCH window: f1000000-f10fffff [ 43.643482] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.651229] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 43.657673] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 47 (level, low) -> IRQ 47 [ 43.665422] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 43.671857] ACPI: PCI Interrupt 0000:02:00.2[B] -> GSI 71 (level, low) -> IRQ 71 [ 43.679597] PCI: Setting latency timer of device 0000:02:00.2 to 64 [ 43.686040] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.693787] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 43.700226] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.711532] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 43.717960] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 43.724428] NET: Registered protocol family 2 [ 43.768458] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 43.776836] TCP established hash table entries: 65536 (order: 9, 2621440 bytes) [ 43.785898] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 43.793985] TCP: Hash tables configured (established 65536 bind 65536) [ 43.800684] TCP reno registered [ 43.813446] IA-32 Microcode Update Driver: v1.14a [ 43.822404] audit: initializing netlink socket (disabled) [ 43.827986] audit(1192112205.360:1): initialized [ 43.832875] Total HugeTLB memory allocated, 0 [ 43.837824] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 43.844612] io scheduler noop registered [ 43.848703] io scheduler anticipatory registered [ 43.853483] io scheduler deadline registered [ 43.857936] io scheduler cfq registered (default) [ 43.862809] Intel E7520/7320/7525 detected. Disabling irq balancing and affinity [ 43.870501] IRQ lockup detection disabled [ 43.875891] Boot video device is 0000:01:02.0 [ 43.880616] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 43.887068] Allocate Port Service[0000:00:02.0:pcie00] [ 43.892434] Allocate Port Service[0000:00:02.0:pcie01] [ 43.897822] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 43.904269] Allocate Port Service[0000:00:04.0:pcie00] [ 43.909629] Allocate Port Service[0000:00:04.0:pcie01] [ 43.914977] Allocate Port Service[0000:00:04.0:pcie02] [ 43.920373] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 43.926818] Allocate Port Service[0000:00:06.0:pcie00] [ 43.932167] Allocate Port Service[0000:00:06.0:pcie01] [ 43.937520] Allocate Port Service[0000:00:06.0:pcie02] [ 43.943013] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support [ 43.950901] AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support [ 43.958783] AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support [ 43.967060] input: Power Button (FF) as /class/input/input0 [ 43.972801] ACPI: Power Button (FF) [PWRF] [ 43.977180] input: Power Button (CM) as /class/input/input1 [ 43.982923] ACPI: Power Button (CM) [PWRB] [ 43.999964] lp: driver loaded but no devices found [ 44.004998] Real Time Clock Driver v1.12ac [ 44.009457] hpet_resources: 0xfed00000 is busy [ 44.014172] Non-volatile memory driver v1.2 [ 44.018625] ppdev: user-space parallel port driver [ 44.023583] Linux agpgart interface v0.102 [ 44.027888] [drm] Initialized drm 1.1.0 20060810 [ 44.032672] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 44.041916] Hangcheck: Using get_cycles(). [ 44.046183] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 44.054403] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 44.060707] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 44.067388] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 44.073322] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 44.079852] Floppy drive(s): fd0 is 1.44M [ 44.103444] FDC 0 is a National Semiconductor PC87306 [ 44.110543] RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize [ 44.118521] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 44.125127] Copyright (c) 1999-2006 Intel Corporation. [ 44.130502] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 24 (level, low) -> IRQ 24 [ 44.410211] e1000: 0000:04:01.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:04:23:a7:c8:8b [ 44.460959] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 44.468012] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 44.474265] e100: Copyright(c) 1999-2006 Intel Corporation [ 44.480253] tun: Universal TUN/TAP device driver, 1.6 [ 44.485471] tun: (C) 1999-2004 Max Krasnyansky [ 44.491864] netconsole: device eth0 not up yet, forcing it [ 47.842474] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 47.866099] console [netcon0] enabled [ 49.582115] netconsole: network logging started [ 49.586818] Linux video capture interface: v2.00 [ 49.591686] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 49.598217] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 49.606764] Probing IDE interface ide0... [ 50.476759] hda: TEAC DW-552G, ATAPI CD/DVD-ROM drive [ 51.156241] Probing IDE interface ide1... [ 51.731939] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 51.738189] hda: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache [ 51.744535] Uniform CD-ROM driver Revision: 3.20 [ 51.753085] Loading iSCSI transport class v2.0-724. [ 51.758680] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 30 (level, low) -> IRQ 30 [ 66.999270] scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 66.999271] [ 66.999272] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs [ 68.304978] scsi 0:0:5:0: Direct-Access MAXTOR ATLAS10K4_73WLS DFV0 PQ: 0 ANSI: 3 [ 68.313378] target0:0:5: asynchronous [ 68.317309] scsi0:A:5:0: Tagged Queuing enabled. Depth 32 [ 68.323028] target0:0:5: Beginning Domain Validation [ 68.330420] target0:0:5: wide asynchronous [ 68.336454] target0:0:5: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS (6.25 ns, offset 127) [ 68.357938] target0:0:5: Ending Domain Validation [ 68.363915] scsi 0:0:6:0: Direct-Access MAXTOR ATLAS10K4_73WLS DFV0 PQ: 0 ANSI: 3 [ 68.372310] target0:0:6: asynchronous [ 68.376234] scsi0:A:6:0: Tagged Queuing enabled. Depth 32 [ 68.381960] target0:0:6: Beginning Domain Validation [ 68.389343] target0:0:6: wide asynchronous [ 68.395365] target0:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS (6.25 ns, offset 127) [ 68.417921] target0:0:6: Ending Domain Validation [ 70.477698] ACPI: PCI Interrupt 0000:04:03.1[B] -> GSI 31 (level, low) -> IRQ 31 [ 85.716670] scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 85.716671] [ 85.716673] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs [ 89.590144] sd 0:0:5:0: [sda] 143666192 512-byte hardware sectors (73557 MB) [ 89.599039] sd 0:0:5:0: [sda] Write Protect is off [ 89.604002] sd 0:0:5:0: [sda] Mode Sense: ed 00 10 08 [ 89.610363] sd 0:0:5:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 89.619460] sd 0:0:5:0: [sda] 143666192 512-byte hardware sectors (73557 MB) [ 89.628351] sd 0:0:5:0: [sda] Write Protect is off [ 89.633310] sd 0:0:5:0: [sda] Mode Sense: ed 00 10 08 [ 89.639678] sd 0:0:5:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 89.648502] sda: sda1 sda2 sda3 sda4 < sda5 > [ 89.661469] sd 0:0:5:0: [sda] Attached SCSI disk [ 89.666561] sd 0:0:6:0: [sdb] 143666192 512-byte hardware sectors (73557 MB) [ 89.675447] sd 0:0:6:0: [sdb] Write Protect is off [ 89.680415] sd 0:0:6:0: [sdb] Mode Sense: ed 00 10 08 [ 89.686786] sd 0:0:6:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 89.695872] sd 0:0:6:0: [sdb] 143666192 512-byte hardware sectors (73557 MB) [ 89.704755] sd 0:0:6:0: [sdb] Write Protect is off [ 89.709712] sd 0:0:6:0: [sdb] Mode Sense: ed 00 10 08 [ 89.716074] sd 0:0:6:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 89.724904] sdb: sdb1 [ 89.727812] sd 0:0:6:0: [sdb] Attached SCSI disk [ 89.732747] sd 0:0:5:0: Attached scsi generic sg0 type 0 [ 89.738284] sd 0:0:6:0: Attached scsi generic sg1 type 0 [ 89.743956] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 89.752170] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 89.758617] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 89.764210] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 89.771933] ehci_hcd 0000:00:1d.7: debug port 1 [ 89.776637] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 89.784251] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfdc00 [ 89.793957] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 89.801949] usb usb1: configuration #1 chosen from 1 choice [ 89.807751] hub 1-0:1.0: USB hub found [ 89.811680] hub 1-0:1.0: 8 ports detected [ 89.922445] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 89.930291] USB Universal Host Controller Interface driver v3.0 [ 89.936454] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 89.944211] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 89.950646] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 89.956156] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 89.963866] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800 [ 89.969962] usb usb2: configuration #1 chosen from 1 choice [ 89.975760] hub 2-0:1.0: USB hub found [ 89.979691] hub 2-0:1.0: 2 ports detected [ 90.090332] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 90.098081] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 90.104521] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 90.110025] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 90.117725] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880 [ 90.123823] usb usb3: configuration #1 chosen from 1 choice [ 90.129622] hub 3-0:1.0: USB hub found [ 90.133551] hub 3-0:1.0: 2 ports detected [ 90.242245] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 90.253566] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 90.260001] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 90.265510] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 90.273224] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00 [ 90.279321] usb usb4: configuration #1 chosen from 1 choice [ 90.285120] hub 4-0:1.0: USB hub found [ 90.289051] hub 4-0:1.0: 2 ports detected [ 90.398221] usbcore: registered new interface driver libusual [ 90.404268] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 90.414975] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 90.420117] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 90.425572] mice: PS/2 mouse device common for all mice [ 90.450897] input: AT Translated Set 2 keyboard as /class/input/input2 [ 90.463645] input: PC Speaker as /class/input/input3 [ 91.280411] input: PS/2 Generic Mouse as /class/input/input4 [ 91.289529] i2c /dev entries driver [ 91.293328] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) [ 91.303002] usbcore: registered new interface driver hiddev [ 91.308795] usbcore: registered new interface driver usbhid [ 91.314534] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 91.321012] IPv4 over IPv4 tunneling driver [ 91.325473] GRE over IPv4 tunneling driver [ 91.329883] TCP cubic registered [ 91.333284] NET: Registered protocol family 1 [ 91.337812] NET: Registered protocol family 17 [ 91.342425] NET: Registered protocol family 15 [ 91.347199] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 91.353976] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 91.362624] ieee80211_crypt: registered algorithm 'NULL' [ 91.368106] ieee80211_crypt: registered algorithm 'WEP' [ 91.373496] ieee80211_crypt: registered algorithm 'CCMP' [ 91.379233] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 91.390461] kjournald starting. Commit interval 5 seconds [ 91.390473] EXT3-fs: mounted filesystem with ordered data mode. [ 91.390484] VFS: Mounted root (ext3 filesystem) readonly. [ 91.390500] Freeing unused kernel memory: 232k freed [ 91.413479] Write protecting the kernel read-only data: 1404k [ 91.445784] khelper used greatest stack depth: 5328 bytes left [ 91.820731] stty used greatest stack depth: 5000 bytes left [ 91.930151] mount used greatest stack depth: 4328 bytes left [ 92.243165] EXT3 (no)acl options not supported [ 92.446548] EXT3 (no)acl options not supported [ 92.459892] EXT3 FS on sda5, internal journal [ 92.513730] udevd used greatest stack depth: 4000 bytes left [ 94.165775] loop: module loaded [ 94.173162] EXT3 (no)acl options not supported [ 94.178260] kjournald starting. Commit interval 5 seconds [ 94.188019] EXT3 FS on sda1, internal journal [ 94.192624] EXT3-fs: mounted filesystem with ordered data mode. [ 94.209839] EXT3 (no)acl options not supported [ 94.215113] kjournald starting. Commit interval 5 seconds [ 94.220788] EXT3 FS on sda3, internal journal [ 94.225385] EXT3-fs: mounted filesystem with ordered data mode. [ 96.502104] Adding 4192956k swap on /dev/sda2. Priority:-1 extents:1 across:4192956k [ 101.127254] boot used greatest stack depth: 3928 bytes left [ 104.490757] mount used greatest stack depth: 3168 bytes left [ 430.508461] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 430.515633] ReiserFS: sdb1: using ordered data mode [ 430.523339] ReiserFS: sdb1: journal params: device sdb1, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 [ 430.539390] ReiserFS: sdb1: checking transaction log (sdb1) [ 430.718528] ReiserFS: sdb1: Using r5 hash to sort names [ 501.856666] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 501.863847] ReiserFS: sdb1: using journaled data mode [ 501.870058] ReiserFS: sdb1: journal params: device sdb1, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 [ 501.885781] ReiserFS: sdb1: checking transaction log (sdb1) [ 502.059249] ReiserFS: sdb1: Using r5 hash to sort names [ 572.435558] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 572.442732] ReiserFS: sdb1: using writeback data mode [ 572.450455] ReiserFS: sdb1: journal params: device sdb1, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 [ 572.466196] ReiserFS: sdb1: checking transaction log (sdb1) [ 572.651602] ReiserFS: sdb1: Using r5 hash to sort names [ 631.323197] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 631.330366] ReiserFS: sdb1: using ordered data mode [ 631.342295] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 [ 631.358083] ReiserFS: sdb1: checking transaction log (sdb1) [ 631.621310] ReiserFS: sdb1: Using r5 hash to sort names [ 679.508009] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 679.515175] ReiserFS: sdb1: using journaled data mode [ 679.525411] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 [ 679.541262] ReiserFS: sdb1: checking transaction log (sdb1) [ 679.810408] ReiserFS: sdb1: Using r5 hash to sort names [ 717.865060] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 717.872230] ReiserFS: sdb1: using writeback data mode [ 717.883937] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 [ 717.899687] ReiserFS: sdb1: checking transaction log (sdb1) [ 718.162933] ReiserFS: sdb1: Using r5 hash to sort names [ 762.289489] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 762.296647] ReiserFS: sdb1: using ordered data mode [ 762.306205] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 762.322098] ReiserFS: sdb1: checking transaction log (sdb1) [ 762.824689] ReiserFS: sdb1: Using r5 hash to sort names [ 797.102578] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 797.109747] ReiserFS: sdb1: using journaled data mode [ 797.120438] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 797.136289] ReiserFS: sdb1: checking transaction log (sdb1) [ 797.638901] ReiserFS: sdb1: Using r5 hash to sort names [ 831.743362] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 831.750525] ReiserFS: sdb1: using writeback data mode [ 831.761023] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 831.776819] ReiserFS: sdb1: checking transaction log (sdb1) [ 832.273510] ReiserFS: sdb1: Using r5 hash to sort names