========== hostname -s: ========== caor-test8 ========== domainname: ========== ========== uname -a: ========== Linux caor-test8 2.6.23 #1 SMP Thu Oct 11 12:34:19 PDT 2007 x86_64 x86_64 x86_64 GNU/Linux ========== df -Th: ========== Filesystem Type Size Used Avail Use% Mounted on /dev/sda5 ext3 54G 15G 37G 28% / udev tmpfs 2.0G 176K 2.0G 1% /dev /dev/sda1 ext3 99M 64M 30M 68% /boot /dev/sda3 ext3 9.9G 7.4G 2.1G 79% /home caor-control:/cruc/packages nfs 126G 20G 100G 17% /cruc/packages caor-control:/cruc/plans nfs 126G 20G 100G 17% /cruc/plans caor-control:/cruc/runs nfs 126G 20G 100G 17% /cruc/runs caor-control:/cruc/suts nfs 126G 20G 100G 17% /cruc/suts caor-control:/cruc/usr nfs 126G 20G 100G 17% /cruc/usr caor-control:/cruc/etc nfs 126G 20G 100G 17% /cruc/etc ========== mount: ========== /dev/sda5 on / type ext3 (rw,noacl) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/sda1 on /boot type ext3 (rw,noacl) /dev/sda3 on /home type ext3 (rw,noacl) caor-control:/cruc/packages on /cruc/packages type nfs (rw,soft,fg,intr,addr=138.2.140.159) caor-control:/cruc/plans on /cruc/plans type nfs (rw,soft,fg,intr,addr=138.2.140.159) caor-control:/cruc/runs on /cruc/runs type nfs (rw,soft,fg,intr,addr=138.2.140.159) caor-control:/cruc/suts on /cruc/suts type nfs (rw,soft,fg,intr,addr=138.2.140.159) caor-control:/cruc/usr on /cruc/usr type nfs (rw,soft,fg,intr,addr=138.2.140.159) caor-control:/cruc/etc on /cruc/etc type nfs (rw,soft,fg,intr,addr=138.2.140.159) ========== lsmod: ========== Module Size Used by loop 16772 0 ========== lshw: ========== /cruc/usr/bin/sut_sysinfo: line 11: lshw: command not found ========== lspci -vvv: ========== 00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 08) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [64] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 256 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 2 Link: Latency L0s <4us, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Advanced Error Reporting 00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 08) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR+ TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [64] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 4 Link: Latency L0s <4us, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Slot: AtnBtn+ PwrCtrl+ MRL+ AtnInd+ PwrInd+ HotPlug+ Surpise- Slot: Number 4, PowerLimit 25.000000 Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+ Slot: AttnInd Off, PwrInd Off, Power+ Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Advanced Error Reporting 00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 08) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR+ TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [64] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 6 Link: Latency L0s <4us, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Slot: AtnBtn+ PwrCtrl+ MRL+ AtnInd+ PwrInd+ HotPlug+ Surpise- Slot: Number 6, PowerLimit 25.000000 Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+ Slot: AttnInd Off, PwrInd Off, Power+ Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Advanced Error Reporting 00:08.0 System peripheral: Intel Corporation E7525/E7520/E7320 Extended Configuration Registers (rev 08) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 256 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [78] #0c [0008] Capabilities: [d8] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 Capabilities: [100] Advanced Error Reporting Capabilities: [300] Power Budgeting 02:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A (rev 08) (prog-if 20 [IO(X)-APIC]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 256 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [78] #0c [0008] Capabilities: [d8] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=02:00.2 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 Capabilities: [100] Advanced Error Reporting Capabilities: [300] Power Budgeting 02:00.3 PIC: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B (rev 08) (prog-if 20 [IO(X)-APIC]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- /dev/null || /cruc/usr/bin/sut_dispatcher >/cruc/suts/caor-test8/sut.log root 3423 0.0 0.0 9272 1044 ? S 13:21 0:01 /bin/bash -l /cruc/usr/bin/sut_dispatcher root 3793 0.0 0.0 0 0 ? S 13:21 0:00 [pdflush] root 8331 0.0 0.0 0 0 ? S 14:01 0:00 [pdflush] root 25060 0.0 0.0 7976 1448 ? S 14:15 0:00 /bin/bash /cruc/runs/2107/RUNNING/caor-test8/020-save_sysinfo root 25064 0.0 0.0 8008 1396 ? S 14:15 0:00 /bin/bash /cruc/usr/bin/sut_sysinfo root 25075 0.0 0.0 3296 796 ? R 14:15 0:00 ps auxw ========== chkconfig -l: ========== Makefile 0:off 1:off 2:off 3:off 4:off 5:off 6:off SuSEfirewall2_init 0:off 1:off 2:off 3:off 4:off 5:off 6:off SuSEfirewall2_setup 0:off 1:off 2:off 3:off 4:off 5:off 6:off acpid 0:off 1:off 2:on 3:on 4:off 5:on 6:off alsasound 0:off 1:off 2:on 3:on 4:off 5:on 6:off atd 0:off 1:off 2:off 3:off 4:off 5:off 6:off autofs 0:off 1:off 2:off 3:off 4:off 5:off 6:off autoyast 0:off 1:off 2:off 3:off 4:off 5:off 6:off cron 0:off 1:off 2:on 3:on 4:off 5:on 6:off crucible 0:off 1:off 2:off 3:off 4:off 5:off 6:off dbus 0:off 1:off 2:off 3:on 4:off 5:on 6:off drbd 0:off 1:off 2:off 3:off 4:off 5:off 6:off earlykbd 0:off 1:off 2:off 3:off 4:off 5:on 6:off earlykdm 0:off 1:off 2:off 3:off 4:off 5:on 6:off earlysyslog 0:off 1:off 2:off 3:off 4:off 5:on 6:off esound 0:off 1:off 2:off 3:off 4:off 5:off 6:off evms 0:off 1:off 2:off 3:off 4:off 5:off 6:off fam 0:off 1:off 2:off 3:off 4:off 5:off 6:off fbset 0:off 1:on 2:on 3:on 4:off 5:on 6:off gpm 0:off 1:off 2:off 3:off 4:off 5:off 6:off gssd 0:off 1:off 2:off 3:off 4:off 5:off 6:off haldaemon 0:off 1:off 2:off 3:on 4:off 5:on 6:off heartbeat 0:off 1:off 2:off 3:off 4:off 5:off 6:off idmapd 0:off 1:off 2:off 3:off 4:off 5:off 6:off ipmi 0:off 1:off 2:off 3:off 4:off 5:off 6:off ipvsadm 0:off 1:off 2:off 3:off 4:off 5:off 6:off irq_balancer 0:off 1:on 2:on 3:on 4:off 5:on 6:off joystick 0:off 1:off 2:off 3:off 4:off 5:off 6:off kbd 0:off 1:on 2:on 3:on 4:off 5:on 6:off S:on ksysguardd 0:off 1:off 2:off 3:off 4:off 5:off 6:off ldirectord 0:off 1:off 2:off 3:off 4:off 5:off 6:off lm_sensors 0:off 1:off 2:off 3:off 4:off 5:off 6:off mdadmd 0:off 1:off 2:off 3:off 4:off 5:off 6:off microcode 0:off 1:on 2:on 3:on 4:off 5:on 6:off S:on microcode_ctl 0:off 1:off 2:off 3:on 4:off 5:on 6:off multipathd 0:off 1:off 2:off 3:off 4:off 5:off 6:off network 0:off 1:off 2:on 3:on 4:off 5:on 6:off nfs 0:off 1:off 2:off 3:on 4:off 5:on 6:off nfsboot 0:off 1:off 2:off 3:on 4:off 5:on 6:off nfsserver 0:off 1:off 2:off 3:off 4:off 5:off 6:off novell-zmd 0:off 1:off 2:off 3:on 4:on 5:on 6:off nscd 0:off 1:off 2:off 3:on 4:off 5:on 6:off ntp 0:off 1:off 2:off 3:off 4:off 5:off 6:off o2cb 0:off 1:off 2:on 3:on 4:off 5:on 6:off ocfs2 0:off 1:off 2:on 3:on 4:off 5:on 6:off openct 0:off 1:off 2:off 3:off 4:off 5:off 6:off oraoltschedule 0:off 1:off 2:off 3:off 4:off 5:off 6:off pcscd 0:off 1:off 2:off 3:off 4:off 5:off 6:off portmap 0:off 1:off 2:off 3:on 4:off 5:on 6:off postfix 0:off 1:off 2:off 3:on 4:off 5:on 6:off powerd 0:off 1:off 2:off 3:off 4:off 5:off 6:off powersaved 0:off 1:off 2:on 3:on 4:off 5:on 6:off random 0:off 1:off 2:on 3:on 4:off 5:on 6:off raw 0:off 1:off 2:off 3:off 4:off 5:off 6:off resmgr 0:off 1:off 2:on 3:on 4:off 5:on 6:off rpasswdd 0:off 1:off 2:off 3:off 4:off 5:off 6:off rpmconfigcheck 0:off 1:off 2:off 3:off 4:off 5:off 6:off rsyncd 0:off 1:off 2:off 3:off 4:off 5:off 6:off saslauthd 0:off 1:off 2:off 3:off 4:off 5:off 6:off skeleton.compat 0:off 1:off 2:off 3:off 4:off 5:off 6:off slpd 0:off 1:off 2:off 3:on 4:off 5:on 6:off smartd 0:off 1:off 2:off 3:off 4:off 5:off 6:off smpppd 0:off 1:off 2:off 3:off 4:off 5:off 6:off snmpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off splash 0:off 1:on 2:on 3:on 4:off 5:on 6:off S:on splash_early 0:off 1:off 2:on 3:on 4:off 5:on 6:off sshd 0:off 1:off 2:off 3:on 4:off 5:on 6:off svcgssd 0:off 1:off 2:off 3:off 4:off 5:off 6:off syslog 0:off 1:off 2:on 3:on 4:off 5:on 6:off xdm 0:off 1:off 2:off 3:off 4:off 5:on 6:off xfs 0:off 1:off 2:off 3:off 4:off 5:off 6:off xinetd 0:off 1:off 2:off 3:on 4:off 5:on 6:off ypbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off xinetd based services: chargen: off chargen-udp: off cvs: off daytime: off daytime-udp: off echo: off echo-udp: off fam: off netstat: off rsync: off servers: off services: off systat: off time: off time-udp: off vnc: on ========== ifconfig: ========== eth0 Link encap:Ethernet HWaddr 00:04:23:A7:C8:8B inet addr:138.2.140.128 Bcast:138.2.140.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:101455 errors:0 dropped:0 overruns:0 frame:0 TX packets:94048 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:58116094 (55.4 Mb) TX bytes:74249905 (70.8 Mb) Base address:0xd480 Memory:fe6c0000-fe6e0000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:44 errors:0 dropped:0 overruns:0 frame:0 TX packets:44 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3224 (3.1 Kb) TX bytes:3224 (3.1 Kb) ========== showmount: ========== mount clntudp_create: RPC: Program not registered ========== rpcinfo -p: ========== program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100021 1 tcp 18645 nlockmgr 100021 3 tcp 18645 nlockmgr 100021 4 tcp 18645 nlockmgr ========== exportfs -v: ========== ========== netstat: ========== Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 caor-test8.us.or:entomb caor-control.us.ora:nfs ESTABLISHED tcp 0 0 caor-test8.us.ora:51219 caor-test8.us.or:sunrpc TIME_WAIT tcp 0 0 localhost:purenoise localhost:sunrpc TIME_WAIT Active UNIX domain sockets (w/o servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ] DGRAM 3928 @/var/run/hal/hotplug_socket2 unix 7 [ ] DGRAM 4446 /dev/log unix 2 [ ] DGRAM 295 @/org/kernel/udev/udevd unix 2 [ ] DGRAM 3927 @/org/freedesktop/hal/udev_event unix 2 [ ] DGRAM 6190 unix 2 [ ] DGRAM 6186 unix 3 [ ] STREAM CONNECTED 6184 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 6183 unix 2 [ ] DGRAM 5578 unix 3 [ ] STREAM CONNECTED 5577 /var/run/acpid.socket unix 3 [ ] STREAM CONNECTED 5576 unix 3 [ ] STREAM CONNECTED 5567 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 5566 unix 3 [ ] STREAM CONNECTED 5565 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 5564 unix 2 [ ] DGRAM 5117 unix 2 [ ] DGRAM 4841 unix 3 [ ] STREAM CONNECTED 4652 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 4651 unix 3 [ ] STREAM CONNECTED 4643 @/tmp/hald-local/dbus-4jIAGBOsbH unix 3 [ ] STREAM CONNECTED 4641 unix 3 [ ] STREAM CONNECTED 4275 /var/run/acpid.socket unix 3 [ ] STREAM CONNECTED 4274 unix 3 [ ] STREAM CONNECTED 4326 @/tmp/hald-local/dbus-4jIAGBOsbH unix 3 [ ] STREAM CONNECTED 4273 unix 3 [ ] STREAM CONNECTED 3856 unix 3 [ ] STREAM CONNECTED 3855 ========== nfsstat: ========== Server rpc stats: calls badcalls badauth badclnt xdrcall 0 0 0 0 0 Server nfs v2: null getattr setattr root lookup readlink 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% read wrcache write create remove rename 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% link symlink mkdir rmdir readdir fsstat 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% Client rpc stats: calls retrans authrefrsh 28242 0 0 Client nfs v2: null getattr setattr root lookup readlink 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% read wrcache write create remove rename 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% link symlink mkdir rmdir readdir fsstat 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% Client nfs v3: null getattr setattr lookup access readlink 0 0% 3639 12% 15 0% 7502 26% 610 2% 0 0% read write create mkdir symlink mknod 1444 5% 5785 20% 967 3% 10 0% 0 0% 0 0% remove rmdir rename link readdir readdirplus 901 3% 1 0% 2716 9% 0 0% 0 0% 108 0% fsstat fsinfo pathconf commit 66 0% 12 0% 0 0% 4465 15% ========== dmesg -s 1000000: ========== [ 0.000000] Linux version 2.6.23 (root@caor-test8) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Thu Oct 11 12:34:19 PDT 2007 [ 0.000000] Command line: auto BOOT_IMAGE=2.6.23 ro root=805 console=ttyS0,115200n81 console=tty0 netconsole=6508@138.2.140.128/eth0,6608@138.2.140.159/00:18:8B:01:D2:2B debug ignore_loglevel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ebaf0 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable) [ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffdf000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dffdf000 - 00000000e0000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 917456) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 256 used [ 0.000000] end_pfn_map = 1179648 [ 0.000000] DMI not present or invalid. [ 0.000000] ACPI: RSDP 000F6BE0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT DFFD0000, 0038 (r1 A M I OEMRSDT 10000418 MSFT 97) [ 0.000000] ACPI: FACP DFFD0200, 0084 (r2 A M I OEMFACP 10000418 MSFT 97) [ 0.000000] ACPI: DSDT DFFD0460, 54BA (r1 CYCRB CYCRB045 45 INTL 2002026) [ 0.000000] ACPI: FACS DFFDF000, 0040 [ 0.000000] ACPI: APIC DFFD0390, 0084 (r1 A M I OEMAPIC 10000418 MSFT 97) [ 0.000000] ACPI: MCFG DFFD0420, 003C (r1 Intel Cayuse 1 MSFT 1) [ 0.000000] ACPI: OEMB DFFDF040, 0040 (r1 A M I AMI_OEM 10000418 MSFT 97) [ 0.000000] ACPI: HPET DFFD7460, 0038 (r1 A M I OEMHPET 10000418 MSFT 97) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 917456) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1179648 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 917456 [ 0.000000] 0: 1048576 -> 1179648 [ 0.000000] On node 0 totalpages: 1048431 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1592 pages reserved [ 0.000000] DMA zone: 2343 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 897040 pages, LIFO batch:31 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 129024 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] Processor #6 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) [ 0.000000] Processor #7 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 10, address 0xfec80400, GSI 48-71 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at f1000000 (gap: f0000000:fc00000) [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 33256 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order. Total pages: 1028407 [ 0.000000] Kernel command line: auto BOOT_IMAGE=2.6.23 ro root=805 console=ttyS0,115200n81 console=tty0 netconsole=6508@138.2.140.128/eth0,6608@138.2.140.159/00:18:8B:01:D2:2B debug ignore_loglevel [ 0.000000] netconsole: local port 6508 [ 0.000000] netconsole: local IP 138.2.140.128 [ 0.000000] netconsole: interface eth0 [ 0.000000] netconsole: remote port 6608 [ 0.000000] netconsole: remote IP 138.2.140.159 [ 0.000000] netconsole: remote ethernet address 00:18:8b:01:d2:2b [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 41.709787] time.c: Detected 3400.121 MHz processor. [ 41.714174] Console: colour VGA+ 80x25 [ 41.714179] console [tty0] enabled [ 41.729150] console [ttyS0] enabled [ 42.247105] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 42.258650] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 42.267156] Checking aperture... [ 42.270587] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 42.325647] Placing software IO TLB between 0x5e6c000 - 0x9e6c000 [ 42.378190] Memory: 4040820k/4718592k available (3466k kernel code, 152632k reserved, 1862k data, 232k init) [ 42.467965] Calibrating delay using timer specific routine.. 6804.96 BogoMIPS (lpj=13609926) [ 42.476816] Mount-cache hash table entries: 256 [ 42.481704] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 42.487149] CPU: L2 cache: 1024K [ 42.490552] using mwait in idle threads. [ 42.494647] CPU: Physical Processor ID: 0 [ 42.498820] CPU: Processor Core ID: 0 [ 42.502667] CPU0: Thermal monitoring enabled (TM1) [ 42.507642] SMP alternatives: switching to UP code [ 42.513563] ACPI: Core revision 20070126 [ 42.562133] Using local APIC timer interrupts. [ 42.596136] result 12500387 [ 42.599095] Detected 12.500 MHz APIC timer. [ 42.604054] SMP alternatives: switching to SMP code [ 42.609846] Booting processor 1/4 APIC 0x6 [ 42.624368] Initializing CPU#1 [ 42.703832] Calibrating delay using timer specific routine.. 6800.67 BogoMIPS (lpj=13601353) [ 42.703844] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 42.703846] CPU: L2 cache: 1024K [ 42.703849] CPU: Physical Processor ID: 3 [ 42.703850] CPU: Processor Core ID: 0 [ 42.703861] CPU1: Thermal monitoring enabled (TM1) [ 42.704059] Intel(R) Xeon(TM) CPU 3.40GHz stepping 04 [ 42.704086] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 42.771919] SMP alternatives: switching to SMP code [ 42.777592] Booting processor 2/4 APIC 0x1 [ 42.792141] Initializing CPU#2 [ 42.871741] Calibrating delay using timer specific routine.. 6800.31 BogoMIPS (lpj=13600634) [ 42.871755] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 42.871758] CPU: L2 cache: 1024K [ 42.871761] CPU: Physical Processor ID: 0 [ 42.871763] CPU: Processor Core ID: 0 [ 42.871775] CPU2: Thermal monitoring enabled (TM1) [ 42.871978] Intel(R) Xeon(TM) CPU 3.40GHz stepping 04 [ 42.872026] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 42.939842] SMP alternatives: switching to SMP code [ 42.945754] Booting processor 3/4 APIC 0x7 [ 42.960272] Initializing CPU#3 [ 43.039649] Calibrating delay using timer specific routine.. 6800.26 BogoMIPS (lpj=13600534) [ 43.039660] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 43.039662] CPU: L2 cache: 1024K [ 43.039665] CPU: Physical Processor ID: 3 [ 43.039666] CPU: Processor Core ID: 0 [ 43.039677] CPU3: Thermal monitoring enabled (TM1) [ 43.039876] Intel(R) Xeon(TM) CPU 3.40GHz stepping 04 [ 43.039890] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 43.107630] Brought up 4 CPUs [ 43.111083] khelper used greatest stack depth: 6512 bytes left [ 43.117107] khelper used greatest stack depth: 6328 bytes left [ 43.123165] NET: Registered protocol family 16 [ 43.128004] No dock devices found. [ 43.132107] ACPI: bus type pci registered [ 43.136289] PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support. [ 43.151397] PCI: Using MMCONFIG at e0000000 - efffffff [ 43.158443] khelper used greatest stack depth: 6256 bytes left [ 43.166745] ACPI: EC: Look up EC in DSDT [ 43.175561] ACPI: Interpreter enabled [ 43.179392] ACPI: (supports S0 S1 S3 S5) [ 43.183721] ACPI: Using IOAPIC for interrupt routing [ 43.200236] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 43.205627] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 43.212236] PCI quirk: region 0500-053f claimed by ICH4 GPIO [ 43.218192] PCI: PXH quirk detected, disabling MSI for SHPC device [ 43.224573] PCI: PXH quirk detected, disabling MSI for SHPC device [ 43.231491] PCI: Transparent bridge - 0000:00:1e.0 [ 43.236482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 43.242740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 43.249388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 43.255992] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2P3._PRT] [ 43.263115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2P4._PRT] [ 43.270179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 43.276815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 43.287271] ACPI: PCI Interrupt Link [LNKA] (IRQs *7) [ 43.292768] ACPI: PCI Interrupt Link [LNKB] (IRQs *7) [ 43.298266] ACPI: PCI Interrupt Link [LNKC] (IRQs *7) [ 43.303769] ACPI: PCI Interrupt Link [LNKD] (IRQs *7) [ 43.309266] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 43.318592] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 43.327925] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 43.337248] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 43.345274] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 75, should be 6A [20070126] [ 43.355347] Linux Plug and Play Support v0.97 (c) Adam Belay [ 43.361219] pnp: PnP ACPI init [ 43.364458] ACPI: bus type pnp registered [ 43.373418] pnp: PnP ACPI: found 15 devices [ 43.377768] ACPI: ACPI bus type pnp unregistered [ 43.382956] SCSI subsystem initialized [ 43.387114] usbcore: registered new interface driver usbfs [ 43.392861] usbcore: registered new interface driver hub [ 43.398401] usbcore: registered new device driver usb [ 43.403839] PCI: Using ACPI for IRQ routing [ 43.408193] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 43.431438] PCI-GART: No AMD northbridge found. [ 43.436135] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 43.441393] hpet0: 3 64-bit timers, 14318180 Hz [ 43.447429] Time: tsc clocksource has been installed. [ 43.455469] pnp: 00:0b: ioport range 0x600-0x61f has been reserved [ 43.461819] pnp: 00:0b: ioport range 0x580-0x59f has been reserved [ 43.468168] pnp: 00:0b: ioport range 0x640-0x65f has been reserved [ 43.474514] pnp: 00:0b: ioport range 0x680-0x6cf has been reserved [ 43.480859] pnp: 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved [ 43.487983] pnp: 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved [ 43.495576] pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved [ 43.503186] pnp: 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved [ 43.510308] pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved [ 43.517919] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 43.524520] pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved [ 43.531127] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 43.538074] pnp: 00:0e: iomem range 0x100000-0xdfffffff could not be reserved [ 43.545866] PCI: Bridge: 0000:02:00.0 [ 43.549697] IO window: c000-dfff [ 43.553271] MEM window: fe300000-fe6fffff [ 43.557619] PREFETCH window: ff900000-ff9fffff [ 43.562400] PCI: Bridge: 0000:02:00.2 [ 43.566227] IO window: disabled. [ 43.569796] MEM window: disabled. [ 43.573449] PREFETCH window: disabled. [ 43.577539] PCI: Bridge: 0000:00:02.0 [ 43.581367] IO window: c000-dfff [ 43.584934] MEM window: fe300000-fe8fffff [ 43.589282] PREFETCH window: ff900000-ffafffff [ 43.594062] PCI: Bridge: 0000:00:04.0 [ 43.597891] IO window: disabled. [ 43.601458] MEM window: fe900000-fe9fffff [ 43.605805] PREFETCH window: disabled. [ 43.609893] PCI: Bridge: 0000:00:06.0 [ 43.613722] IO window: disabled. [ 43.617290] MEM window: fea00000-feafffff [ 43.621637] PREFETCH window: disabled. [ 43.625725] PCI: Bridge: 0000:00:1e.0 [ 43.629555] IO window: b000-bfff [ 43.633122] MEM window: fc200000-fe2fffff [ 43.637478] PREFETCH window: f1000000-f10fffff [ 43.642271] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.650019] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 43.656463] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 47 (level, low) -> IRQ 47 [ 43.664213] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 43.670656] ACPI: PCI Interrupt 0000:02:00.2[B] -> GSI 71 (level, low) -> IRQ 71 [ 43.678404] PCI: Setting latency timer of device 0000:02:00.2 to 64 [ 43.684838] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.692586] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 43.699024] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.710331] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 43.716768] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 43.723234] NET: Registered protocol family 2 [ 43.767278] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 43.775674] TCP established hash table entries: 65536 (order: 9, 2621440 bytes) [ 43.784735] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 43.792861] TCP: Hash tables configured (established 65536 bind 65536) [ 43.799561] TCP reno registered [ 43.812268] IA-32 Microcode Update Driver: v1.14a [ 43.821216] audit: initializing netlink socket (disabled) [ 43.826802] audit(1192108747.360:1): initialized [ 43.831688] Total HugeTLB memory allocated, 0 [ 43.836635] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 43.843417] io scheduler noop registered [ 43.847511] io scheduler anticipatory registered [ 43.852290] io scheduler deadline registered [ 43.856744] io scheduler cfq registered (default) [ 43.861626] Intel E7520/7320/7525 detected. Disabling irq balancing and affinity [ 43.869307] IRQ lockup detection disabled [ 43.874705] Boot video device is 0000:01:02.0 [ 43.879433] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 43.885884] Allocate Port Service[0000:00:02.0:pcie00] [ 43.891250] Allocate Port Service[0000:00:02.0:pcie01] [ 43.896638] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 43.903084] Allocate Port Service[0000:00:04.0:pcie00] [ 43.908435] Allocate Port Service[0000:00:04.0:pcie01] [ 43.913791] Allocate Port Service[0000:00:04.0:pcie02] [ 43.919184] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 43.925634] Allocate Port Service[0000:00:06.0:pcie00] [ 43.930984] Allocate Port Service[0000:00:06.0:pcie01] [ 43.936336] Allocate Port Service[0000:00:06.0:pcie02] [ 43.941829] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support [ 43.949718] AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support [ 43.957599] AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support [ 43.965885] input: Power Button (FF) as /class/input/input0 [ 43.971626] ACPI: Power Button (FF) [PWRF] [ 43.976006] input: Power Button (CM) as /class/input/input1 [ 43.981747] ACPI: Power Button (CM) [PWRB] [ 43.998753] lp: driver loaded but no devices found [ 44.003778] Real Time Clock Driver v1.12ac [ 44.008223] hpet_resources: 0xfed00000 is busy [ 44.012932] Non-volatile memory driver v1.2 [ 44.017380] ppdev: user-space parallel port driver [ 44.022329] Linux agpgart interface v0.102 [ 44.026634] [drm] Initialized drm 1.1.0 20060810 [ 44.031418] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 44.040654] Hangcheck: Using get_cycles(). [ 44.044921] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 44.053130] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 44.059435] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 44.066106] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 44.072035] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 44.078571] Floppy drive(s): fd0 is 1.44M [ 44.102278] FDC 0 is a National Semiconductor PC87306 [ 44.109368] RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize [ 44.117357] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 44.123961] Copyright (c) 1999-2006 Intel Corporation. [ 44.129342] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 24 (level, low) -> IRQ 24 [ 44.409052] e1000: 0000:04:01.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:04:23:a7:c8:8b [ 44.459780] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 44.466827] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 44.473088] e100: Copyright(c) 1999-2006 Intel Corporation [ 44.479068] tun: Universal TUN/TAP device driver, 1.6 [ 44.484287] tun: (C) 1999-2004 Max Krasnyansky [ 44.490670] netconsole: device eth0 not up yet, forcing it [ 48.504667] netconsole: timeout waiting for carrier [ 48.524543] console [netcon0] enabled [ 48.676820] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 50.249462] netconsole: network logging started [ 50.254163] Linux video capture interface: v2.00 [ 50.259034] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 50.265592] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 50.274150] Probing IDE interface ide0... [ 51.143206] hda: TEAC DW-552G, ATAPI CD/DVD-ROM drive [ 51.822684] Probing IDE interface ide1... [ 52.398377] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 52.404612] hda: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache [ 52.410967] Uniform CD-ROM driver Revision: 3.20 [ 52.419502] Loading iSCSI transport class v2.0-724. [ 52.425093] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 30 (level, low) -> IRQ 30 [ 67.665712] scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 67.665713] [ 67.665714] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs [ 68.971394] scsi 0:0:5:0: Direct-Access MAXTOR ATLAS10K4_73WLS DFV0 PQ: 0 ANSI: 3 [ 68.979785] target0:0:5: asynchronous [ 68.983706] scsi0:A:5:0: Tagged Queuing enabled. Depth 32 [ 68.989426] target0:0:5: Beginning Domain Validation [ 68.996820] target0:0:5: wide asynchronous [ 69.002843] target0:0:5: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS (6.25 ns, offset 127) [ 69.024388] target0:0:5: Ending Domain Validation [ 69.030352] scsi 0:0:6:0: Direct-Access MAXTOR ATLAS10K4_73WLS DFV0 PQ: 0 ANSI: 3 [ 69.038742] target0:0:6: asynchronous [ 69.042665] scsi0:A:6:0: Tagged Queuing enabled. Depth 32 [ 69.048383] target0:0:6: Beginning Domain Validation [ 69.055750] target0:0:6: wide asynchronous [ 69.061771] target0:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS (6.25 ns, offset 127) [ 69.084403] target0:0:6: Ending Domain Validation [ 71.144173] ACPI: PCI Interrupt 0000:04:03.1[B] -> GSI 31 (level, low) -> IRQ 31 [ 86.383111] scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 86.383113] [ 86.383114] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs [ 90.256500] sd 0:0:5:0: [sda] 143666192 512-byte hardware sectors (73557 MB) [ 90.265390] sd 0:0:5:0: [sda] Write Protect is off [ 90.270348] sd 0:0:5:0: [sda] Mode Sense: ed 00 10 08 [ 90.276727] sd 0:0:5:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 90.285811] sd 0:0:5:0: [sda] 143666192 512-byte hardware sectors (73557 MB) [ 90.294704] sd 0:0:5:0: [sda] Write Protect is off [ 90.299665] sd 0:0:5:0: [sda] Mode Sense: ed 00 10 08 [ 90.306050] sd 0:0:5:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 90.314864] sda: sda1 sda2 sda3 sda4 < sda5 > [ 90.328901] sd 0:0:5:0: [sda] Attached SCSI disk [ 90.333979] sd 0:0:6:0: [sdb] 143666192 512-byte hardware sectors (73557 MB) [ 90.342883] sd 0:0:6:0: [sdb] Write Protect is off [ 90.347842] sd 0:0:6:0: [sdb] Mode Sense: ed 00 10 08 [ 90.354222] sd 0:0:6:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 90.363303] sd 0:0:6:0: [sdb] 143666192 512-byte hardware sectors (73557 MB) [ 90.372212] sd 0:0:6:0: [sdb] Write Protect is off [ 90.377166] sd 0:0:6:0: [sdb] Mode Sense: ed 00 10 08 [ 90.383534] sd 0:0:6:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 90.392358] sdb: sdb1 [ 90.395288] sd 0:0:6:0: [sdb] Attached SCSI disk [ 90.400215] sd 0:0:5:0: Attached scsi generic sg0 type 0 [ 90.405750] sd 0:0:6:0: Attached scsi generic sg1 type 0 [ 90.411411] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 90.419632] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 90.426093] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 90.431685] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 90.439412] ehci_hcd 0000:00:1d.7: debug port 1 [ 90.444115] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 90.451716] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfdc00 [ 90.461434] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 90.469430] usb usb1: configuration #1 chosen from 1 choice [ 90.475244] hub 1-0:1.0: USB hub found [ 90.479170] hub 1-0:1.0: 8 ports detected [ 90.588884] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 90.596731] USB Universal Host Controller Interface driver v3.0 [ 90.602896] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 90.610658] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 90.617089] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 90.622598] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 90.630320] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800 [ 90.636420] usb usb2: configuration #1 chosen from 1 choice [ 90.642226] hub 2-0:1.0: USB hub found [ 90.646154] hub 2-0:1.0: 2 ports detected [ 90.756779] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 90.764533] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 90.770975] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 90.776481] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 90.784193] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880 [ 90.790287] usb usb3: configuration #1 chosen from 1 choice [ 90.796084] hub 3-0:1.0: USB hub found [ 90.800013] hub 3-0:1.0: 2 ports detected [ 90.908688] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 90.920000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 90.926430] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 90.931935] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 90.939653] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00 [ 90.945744] usb usb4: configuration #1 chosen from 1 choice [ 90.951543] hub 4-0:1.0: USB hub found [ 90.955470] hub 4-0:1.0: 2 ports detected [ 91.064664] usbcore: registered new interface driver libusual [ 91.070691] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 91.081416] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 91.086556] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 91.091941] mice: PS/2 mouse device common for all mice [ 91.117544] input: AT Translated Set 2 keyboard as /class/input/input2 [ 91.129646] input: PC Speaker as /class/input/input3 [ 91.945853] input: PS/2 Generic Mouse as /class/input/input4 [ 91.954950] i2c /dev entries driver [ 91.958739] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) [ 91.968406] usbcore: registered new interface driver hiddev [ 91.974193] usbcore: registered new interface driver usbhid [ 91.979939] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 91.986409] IPv4 over IPv4 tunneling driver [ 91.990866] GRE over IPv4 tunneling driver [ 91.995283] TCP cubic registered [ 91.998688] NET: Registered protocol family 1 [ 92.003221] NET: Registered protocol family 17 [ 92.007835] NET: Registered protocol family 15 [ 92.012601] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 92.019377] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 92.028027] ieee80211_crypt: registered algorithm 'NULL' [ 92.033505] ieee80211_crypt: registered algorithm 'WEP' [ 92.038898] ieee80211_crypt: registered algorithm 'CCMP' [ 92.044635] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 92.057900] kjournald starting. Commit interval 5 seconds [ 92.057921] EXT3-fs: mounted filesystem with ordered data mode. [ 92.057939] VFS: Mounted root (ext3 filesystem) readonly. [ 92.057965] Freeing unused kernel memory: 232k freed [ 92.080734] Write protecting the kernel read-only data: 1404k [ 92.113233] khelper used greatest stack depth: 5328 bytes left [ 92.494146] stty used greatest stack depth: 5000 bytes left [ 92.603571] mount used greatest stack depth: 4328 bytes left [ 92.922622] EXT3 (no)acl options not supported [ 93.081512] fsck used greatest stack depth: 4184 bytes left [ 93.120014] EXT3 (no)acl options not supported [ 93.133331] EXT3 FS on sda5, internal journal [ 95.230255] loop: module loaded [ 95.237792] EXT3 (no)acl options not supported [ 95.242917] kjournald starting. Commit interval 5 seconds [ 95.248749] EXT3 FS on sda1, internal journal [ 95.253336] EXT3-fs: mounted filesystem with ordered data mode. [ 95.266427] EXT3 (no)acl options not supported [ 95.271672] kjournald starting. Commit interval 5 seconds [ 95.277341] EXT3 FS on sda3, internal journal [ 95.281942] EXT3-fs: mounted filesystem with ordered data mode. [ 97.632501] fdisk used greatest stack depth: 4000 bytes left [ 97.672225] Adding 4192956k swap on /dev/sda2. Priority:-1 extents:1 across:4192956k [ 102.614907] boot used greatest stack depth: 3928 bytes left [ 105.726800] mount used greatest stack depth: 2848 bytes left [ 493.085044] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 493.092224] ReiserFS: sdb1: using ordered data mode [ 493.099827] ReiserFS: sdb1: journal params: device sdb1, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 [ 493.115991] ReiserFS: sdb1: checking transaction log (sdb1) [ 493.306962] ReiserFS: sdb1: Using r5 hash to sort names [ 562.989070] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 562.996277] ReiserFS: sdb1: using journaled data mode [ 563.003661] ReiserFS: sdb1: journal params: device sdb1, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 [ 563.019506] ReiserFS: sdb1: checking transaction log (sdb1) [ 563.210836] ReiserFS: sdb1: Using r5 hash to sort names [ 633.066468] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 633.073646] ReiserFS: sdb1: using writeback data mode [ 633.081140] ReiserFS: sdb1: journal params: device sdb1, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 [ 633.096982] ReiserFS: sdb1: checking transaction log (sdb1) [ 633.288295] ReiserFS: sdb1: Using r5 hash to sort names [ 691.428239] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 691.435399] ReiserFS: sdb1: using ordered data mode [ 691.446146] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 [ 691.461872] ReiserFS: sdb1: checking transaction log (sdb1) [ 691.725149] ReiserFS: sdb1: Using r5 hash to sort names [ 739.478761] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 739.485929] ReiserFS: sdb1: using journaled data mode [ 739.497556] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 [ 739.513279] ReiserFS: sdb1: checking transaction log (sdb1) [ 739.776553] ReiserFS: sdb1: Using r5 hash to sort names [ 787.686016] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 787.693181] ReiserFS: sdb1: using writeback data mode [ 787.704617] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 [ 787.720351] ReiserFS: sdb1: checking transaction log (sdb1) [ 787.983618] ReiserFS: sdb1: Using r5 hash to sort names [ 831.829121] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 831.836276] ReiserFS: sdb1: using ordered data mode [ 831.845532] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 831.861461] ReiserFS: sdb1: checking transaction log (sdb1) [ 832.363991] ReiserFS: sdb1: Using r5 hash to sort names [ 866.234840] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 866.242001] ReiserFS: sdb1: using journaled data mode [ 866.252629] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 866.268454] ReiserFS: sdb1: checking transaction log (sdb1) [ 866.765112] ReiserFS: sdb1: Using r5 hash to sort names [ 900.797420] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 900.804577] ReiserFS: sdb1: using writeback data mode [ 900.815375] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 900.831160] ReiserFS: sdb1: checking transaction log (sdb1) [ 901.333857] ReiserFS: sdb1: Using r5 hash to sort names