Detailed specifications for Oracle VM Server Validated Configuration
====================================================================


OLT version :

Oracle VM server details:

   Oracle VM verison :
   Hypervisor version :
   Kernel(dom 0) version :
   Xen version :
   Boot command line parameters:

 Server model details:
    Server model :
    Processor & frequency:
    Number of Processors:
    Other Servers in this model:
    Memory:
    Swap partition size:
    Hardware Virtualization Support(Yes/No):
    Type :
    Network/Interconnect:
    HBA:
    RAID controller:
    On board storage:

OS settings :
    Network driver & version :
    NIC Bonding settings :
    Flow control settings for network interface :
    Storage/HBA driver & version:
    Storage/HBA driver settings :
    Hang check timer module & version:
    Selinux :
    Numa :
    PSP applied (valid for HP):
    cmdline arguments used (/proc/cmdline):
    Kernel parameter settings : i.e 
      /etc/sysctl.conf &
      /etc/security/limits.conf settings
      /etc/modprobe.conf settings


Storage Model details:

    Storage Server:
    Other Storages in this family:

Switch details :

    Switch Name:
    Type of switch ( Storage/Network )
    Config settings :

Hardware Timeout setting:
    HBA timeouts :
    Switch port timeout:

Filesystem details :

 If using NAS,
    mount option :

 If using ocfs2 ,
    ocfs2 packages used & version :
    ocfs2 mount option:
    ocfs2 timeout settings :

Driver Modules used(Name/version/settings) :

Multipathing solution (software) used & their settings:
    Packages used (with version) :
    Vendor :
    Settings used :(like in /etc/modprobe.conf & if any other)



Any other packages used apart from the distribution :

NOTE: On dom0 for persistent device names it is recommended to use device
mapper or udev.

Guest VM Details :
        OS version :
        Kernel version :
        Drivers used: 
        Virtualization Type:
        Oracle database version :
        File system on Guest for oracle database files:
         If using NAS,
            mount option :

         If using ocfs2 ,
            ocfs2 packages used & version :
            ocfs2 mount option:
            ocfs2 timeout settings :

        Kernel parameter settings : i.e /etc/sysctl.conf &
			/etc/security/limits.conf settings
	Driver Modules (Name/version/settings) :        
	Settings used :(like in /etc/modprobe.conf & if any other)
        Guest bootup options (/proc/cmdline):
        timer settings & ntp settings:

NOTE:
Any parameter settings used for the testing which are NOT the default should be documented with justifications.